
26 - 12 WiNG CLI Reference Guide
RFS4000(config-profile-AP7131_UseCase1)#commit write
RFS4000(config-profile-AP7131_UseCase1)#exit
RFS4000(config)#
Apply this Profile to the Discovered AP7131
Access the discovered Access Point using the following command. The discovered device’s MAC address is used to access
its context.
RFS4000(config)#ap7131 00-23-68-16-C6-C4
RFS4000(config-device-00-23-68-16-C6-C4)#
Assign the AP profile to this Access Point.
RFS4000(config-device-00-23-68-16-C6-C4)#use profile AP7131_UseCase1
RFS4000(config-device-00-23-68-16-C6-C4)#commit write
Apply the RF Domain profile to the AP
Apply the previously created RF Domain to enable a country code to be assigned to the discovered Access Point. A
discovered Access Point only works properly if its country code is the same as its associated wireless controller.
RFS4000(config-device-00-23-68-16-C6-C4)#use rf-domain RFDOMAIN_UseCase1
RFS4000(config-device-00-23-68-16-C6-C4)#commit write
RFS4000(config-device-00-23-68-16-C6-C4)#Exit
RFS4000(config)#
Kommentare zu diesen Handbüchern