
PROFILES 7 - 71
7.1.21.13 speed
Interface Config Instance
Specifies the speed of a fast-ethernet (10/100) or a gigabit-ethernet port (10/100/1000)
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
Syntax
speed [10|100|1000|auto]
Parameters
Usage Guidelines
Set the interface speed to auto detect and use the fastest speed available. Speed detection is based on connected network
hardware
Example
rfs7000-37FABE(config-profile-default-rfs7000-if-ge1)#speed 10
rfs7000-37FABE(config-profile-default-rfs7000-if-ge1)#
rfs7000-37FABE(config-profile-default-rfs7000-if-ge1)#speed auto
rfs7000-37FABE(config-profile-default-rfs7000-if-ge1)#
10 Forces 10 Mbps operation
100 Forces 100 Mbps operation
1000 Forces 1000 Mbps operation
auto Port automatically detects the speed it should run based on the port at the
other end of the link. Auto negotiation is a requirement for using
1000BASE-T[3] according to the standard.
Kommentare zu diesen Handbüchern