
21 - 12 WiNG CLI Reference Guide
21.1.10 no
smart-rf-policy
Negates a command or sets its default values
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
no [assignable-power|auto-assign|calibration|
channel-list|channel-width|coverage-hole-recovery|enable|
group-by|interference-recovery|neighbor-recovery|
smart-ocs-monitoring]
Parameters
Example
rfs7000-37FABE(config-smart-rf-policy-test)#no assignable-power 5Ghz min
rfs7000-37FABE(config-smart-rf-policy-test)#
rfs7000-37FABE(config-smart-rf-policy-test)#no smart-ocs-monitoring frequency 2.4Ghz
rfs7000-37FABE(config-smart-rf-policy-test)#
[assignable-power|
auto-assign|calibration|
channel-list|
channel-width|
coverage-hole-
recovery|enable|
hold-time|
interference-recovery|
neighbor-recovery|
smart-ocs-monitoring]
• assignable-power – Negates the power range assignment
• auto-assign – Disables all auto assignment features
• calibration – Resets calibration parameters
• channel-list – Removes the assigned channel-list for the selected
frequency
• channel-width – Removes the assigned channel-width for the selected
frequency
• coverage-hole-recovery – Disables recovery from coverage hole errors
• enable – Disables the Smart RF policy feature
• group-by – Unconfigures grouping parameters
• interference-recovery – Disables recovery issues caused by excessive
noise and interference
• neighbor-recovery – Disables recovery issues caused by faulty
neighbor radios
• smart-ocs-monitoring – Disables the off channel monitoring feature
Kommentare zu diesen Handbüchern