
SHOW COMMANDS 6 - 59
6.1.33 power
show commands
Displays power over ethernet (PoE) information
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
power [configuration|status] {on <DEVICE-NAME>}
Parameters
Example
rfs6000-37FAAA(config)#show power status on rfs6000-37FAAA
System Voltage: 53.4 volts
Guard Band: 32 watts
Power Budget: 190 watts Power Consumption: 0 watts
poe device 1 temperature 35C
poe device 2 temperature 38C
--------------------------------------------------------------------------------
PORT VOLTS mA WATTS CLASS STATUS
--------------------------------------------------------------------------------
ge1 0.0 0 0.0 0 Off
ge2 0.0 0 0.0 0 Off
ge3 0.0 0 0.0 0 Off
ge4 0.0 0 0.0 0 Off
ge5 0.0 0 0.0 0 Off
ge6 0.0 0 0.0 0 Off
ge7 0.0 0 0.0 0 Off
ge8 0.0 0 0.0 0 Off
--------------------------------------------------------------------------------
rfs6000-37FAAA(config)#show power configuration
--------------------------------------------------------------------------------
PORT PRIORITY POWER LIMIT ENABLED
--------------------------------------------------------------------------------
ge1 low 30.0W yes
ge2 low 30.0W yes
ge3 low 30.0W yes
ge4 low 30.0W yes
ge5 low 30.0W yes
ge6 low 30.0W yes
ge7 low 30.0W yes
ge8 low 30.0W yes
--------------------------------------------------------------------------------
[configuration|status] {on
<DEVICE-NAME>}
• configuration – Displays the PoE configuration
• status – Displays the PoE status
The following are common for the above:
• on <DEVICE-NAME> – Displays information on the AP/Controller
• <DEVICE-NAME> – Displays information on the AP/Controller
name
Kommentare zu diesen Handbüchern