
4 - 36 WiNG CLI Reference Guide
Parameters
show-wireless-client
[ap-
name|auth|bss|enc|hostnam
e|ip|last-active|
location|mac||
radio-alias|radio-id|radio-
type|role|role-policy|state|
username|vendor|vlan|
wlan
Customizes the output of (show wireless client) commands
• ap-name – Hostname of the AP to which this client associates
• auth – The authentication protocol used by the client
• bss – The BSSID to which the client’s radio is associated to
• enc – The encryption suite of the client
• hostname – Hostname of the client – Configured by packet sniffing or
manually
• ip – The IP address of the client
• last-active – Displays the last activity seen on the client
• location – Location of the AP to which this client is associated to
• mac – The MAC address of client
• radio-alias – Consists of an AP's hostname and the radio interface
number in the form of hostname:RX
• radio-id – Consists of AP MAC address and the client interface number
in the form of AA-BB-CC-DD-EE-FF:RX
• radio-type – Radio type of the client
• role – The current role of the client
• role-policy – The role policy used by the client
• state – The current state of the client
• username – The username of the client
• vendor – The vendor ID of the client
• vlan – The VLAN ID assigned to the client
• wlan – WLAN name
show-wireless-client-stats
[hostname|mac|rx-bytes|
rx-errors|
rx-packets|rx-throughput|
tx-bytes|tx-dropped|
tx-packets|tx-throughput
]
Customizes the output of (show wireless client stats) commands
• hostname – The hostname of the client – Configured by sniffing packets
or manually
• mac – The MAC address of the client
• rx-bytes – Displays the number of bytes received
• rx-errors – Displays the number of errors received
• rx-packets – Displays the number of packets received
• rx-throughput – Displays the number of packets received per port and
the percentage of port utilization
• tx-bytes – Displays the number of bytes transmitted
• tx-dropped – Displays the number of packets dropped during
transmission
• tx-packets – Displays the total number of packets transmitted
• tx-throughput – Displays the number of packets transmitted per port
and the percentage of port utilization
Kommentare zu diesen Handbüchern