
PROFILES 7 - 135
7.2.19 wwan
Device Specific Commands
Configures Wireless WAN interface parameters
Supported in the following platforms:
• RFS4000
• RFS6000
Syntax
wwan [apn <WORD>|auth-type|crypto-map <CRYPTo-MAP>|enable|ip
|password|username <WORD>]
wwan auth-type [chap|mschap|mschap-v2|pap]
wwan ip nat [inside|outside]
wwan password [2|<WORD>]
Parameters
Example
rfs4000-880DA7(config-device-00-23-68-88-0D-A7)#wwan enable
rfs4000-880DA7(config-device-00-23-68-88-0D-A7)#
rfs4000-880DA7(config-device-00-23-68-88-0D-A7)#wwan username testuser
rfs4000-880DA7(config-device-00-23-68-88-0D-A7)#
rfs4000-880DA7(config-device-00-23-68-88-0D-A7)#wwan password mototest
rfs4000-880DA7(config-device-00-23-68-88-0D-A7)#
apn <WORD> Enter the access point name provided by the service provider
• <WORD> – A string of up to 25 characters
auth-type [chap|
mschap|mschap-v2|pap]
Specify the authentication-type from the following:
• chap – Challenge Handshake Authentication Protocol
• mschap – Microsoft CHAP extensions
• mschap-v2 – Microsoft CHAP extensions Version 2
• pap – Password Authentication Protocol
crypto-map <CRYPTO-MAP> Enter a crypto map for wireless WAN
• <CRYPTo-MAP> – A string of up to 256 characters
enable Enable wireless WAN feature
ip nat [inside|outside] Configures Internet Protocol (IP) settings
• nat [inside|outside] – Specifies Network Address Translation (NAT)
information
• inside – Marks wireless WAN as NAT inside interface
• outside – Marks wireless WAN as NAT outside interface
username <WORD> Enter the username provided by the service provider
• <WORD> – A string of up to 32 characters
password <WORD> Enter the password provided by the service provider
• 2 – Enter encrypted password
• <WORD> – A string of up to 30 characters
Kommentare zu diesen Handbüchern