
INTERFACE-RADIO COMMANDS 24 - 5
24.1.1 aggregation
interface-radio Instance
Configures 802.11n aggregation related parameters
Supported in the following platforms:
• RFS4011
Syntax
aggregation [ampdu|amsdu]
aggregartion ampdu [rx-only|tx-only|tx-rx|none|max-aggr-size|min-spacing]
aggregation ampdu max-aggr-size[rx|tx]
aggregation ampdu max-aggr-size rx [8191|16383|32767|65535
aggregation ampdu max-aggr-size tx [<0-65535>
aggregation amsdu [rx-only|tx-rx
aggregation ampdu min-spacing [0|1|2|4|8|16]]]
]
Parameters
Example
rfs4000-880DA7(config-profile-default-rfs4000-if-radio1)#
aggregation ampdu tx-only
rfs4000-880DA7(config-profile-default-rfs4000-if-radio1)#show context
RFS4000-880DA7(config-profile-default-RFS4000-if-radio1)#show context
interface radio1
wlan 1 bss 1 primary
wlan wlan1 bss 1
aggregation ampdu tx-only
ampdu [rx-only|tx-only|
tx-rx|none|max-aggr-size|
min-spacing]
ampdu – Configures Aggregate MAC Protocol Data Unit (A-MPDU)
parameters
• tx-only – Supports transmission of AMPDU parameters only
• rx-only – Supports receiving of AMPDU parameters only
• tx-rx – Supports both transmit as well as receiving of AMPDU
parameters
• none – Disables support for AMPDUs
• max-aggr-size [rx|tx] – Configures limits on AMPDU packet sizes
• rx [8191|16383|32767|65535] – Sets the limit on received frames
• 8191– Advertises a maximum of 8191 bytes
• 16383 – Advertises a maximum of 16383 bytes
• 32767 – Advertises a maximum of 32767 bytes
• 65535 – Advertises a maximum of 65535 bytes
• tx [<0-65535>] – Sets the limit on transmitted frames
• <0-65535> – Set the limit in bytes
• min-spacing – Configures the minimum gap between AMPDU frames
amsdu [rx-only|tx-rx] amsdu – Configures Aggregate MAC Service Data Unit (A-MSDU)
parameters
• rx-only – Supports receiving of A-MSDU parameters only
• tx-rx – Supports both transmit as well as receiving of A-MSDU
parameters
Kommentare zu diesen Handbüchern