
SHOW COMMANDS 6 - 45
Example
rfs7000-37FABE(config)#show ip arp test on rfs7000-37FABE
+--------------------+-------------------------+---------------+----------
| IP | MAC | INTERFACE | TYPE |
+--------------------+-------------------------+---------------+---------------+
| 172.16.10.11 | 00-50-DA-95-11-13 | vlan1 | dynamic |
| 172.16.10.10 | 00-02-B3-28-D1-55 | vlan1 | dynamic |
+--------------------+-------------------------+---------------+----------
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show ip interface brief on rfs7000-37FABE
+-----------------+----------------------------+--------------+-----------
| INTERFACE | IP-ADDRESS/MASK | STATUS | PROTOCOL |
+-----------------+----------------------------+--------------+-----------
| me1 | unassigned | DOWN | down |
| vlan44 | unassigned | UP | up |
| vlan1 | 172.16.10.2/24 | UP | up |
| vlan4 | 157.235.208.252/24 | UP | up |
+-----------------+----------------------------+--------------+-----------
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show ip nat translations verbose on rfs7000-37FABE
PROTO ACTUAL SOURCE ACTUAL DESTINATION NATTED SOURCE NATTED DESTINATION
--------------------------------------------------------------------------
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show ip route test on rfs7000-37FABE
+-------------------------+--------------------+------------+-------------
| DESTINATION | GATEWAY | FLAGS | INTERFACE |
+-------------------------+--------------------+------------+-------------
nat translations verbose {on
<DEVICE-NAME>}
Displays Network Address Translation (NAT) information
• translations – Displays NAT translations
• verbose – Displays NAT Translations in real-time
• on <DEVICE-NAME>} – Displays information on the AP/
Controller
• <DEVICE-NAME>} – Displays information on the AP/
Controller/RF Domain name
route
{<WORD>|ge|me1|on|pc|
vlan}
Displays route table information
• <WORD> – Interface name
• ge <1-4> – Displays the configured Gigabit Ethernet interface status
• me1 – Displays the FastEthernet interface status
• pc <1-4> – Displays information on the AP/controller
• Controllerport – Displays the status of layer2 interfaces
• vlan <1-4094> – Displays configured VLAN information
The following parameters are common for the above:
• {on} – Displays information on AP/Controller
• <DEVICE-NAME> – Displays information on the
AP/Controller name
• on <DEVICE- NAME> – Displays information on the
AP/Controller
• <DEVICE-NAME> – Displays information on the
AP/Controller name
Kommentare zu diesen Handbüchern