
DHCP-SERVER-POLICY 13 - 13
13.1.3.8 lease
dhcp-pool-mode
Sets a valid lease time for the IP address used by DHCP clients in the DHCP pool
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
lease [<0-365> {0-23} {0-59> {0-59}|infinite]
Parameters
Usage Guidelines
If lease parameter is not configured on the DHCP pool, the default value is used. The default value of the
lease is 24 hours.
Example
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#lease 1 0 0
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#
show running-config
include-factory
..........................................
ip dhcp pool Test4lease
lease 1 0 0
no domain-name
no bootfile
no dns-server
no default-router
no next-server
no netbios-name-server
no netbios-node-type
no unicast-enable
no update dns
no ddns domainname
no ddns ttl
no ddns multiple-user-class
<0-365> Select a value between 0 and 365 days to configure lease time. Days
may be 0 only when hours and/or mins are greater than 0
• <0-23> – Sets the lease period in hours. Hours can be 0 only when
days and/or minutes are configured with a value greater than 0
• <0-59> – Sets the lease period in minutes. Minutes can be 0 only
when days and/or hours are configured with a value greater than 0
• <0-59> – Sets the lease period in seconds
infinite Sets the lease time as infinite
Kommentare zu diesen Handbüchern