
SHOW COMMANDS 6 - 47
6.1.23 ip-access-list-stats
show commands
Displays IP access list statistics
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
show ip-access-list-stats {on <DEVICE-NAME>|<IP-ACCESS-LIST> {on <DEVICE-NAME>}
Parameters
Example
rfs7000-37FABE(config)#sh ip-access-list-stats
IP Access-list: # Restrict Management ACL #
permit tcp any any eq ftp rule-precedence 1 Hitcount: 0
permit tcp any any eq www rule-precedence 2 Hitcount: 41
permit tcp any any eq ssh rule-precedence 3 Hitcount: 448
permit tcp any any eq https rule-precedence 4 Hitcount: 0
permit udp any any eq snmp rule-precedence 5 Hitcount: 0
permit tcp any any eq telnet rule-precedence 6 Hitcount: 4
NOTE: This command is not present in the USER EXEC Mode
{on <DEVICE-NAME>|<IP-
ACCESS-LIST> {on <DEVICE-
NAME>}
• on <DEVICE-NAME> – Displays information on the AP/Controller
• <DEVICE-NAME> – Displays information on the Controller name
• <IP-ACCESS-LIST> – Specifies the name of the ip-access-list used to
view statistics
• on <DEVICE-NAME> – Displays information on the AP/Controller
• <DEVICE-NAME> – Displays information on the AP/Controller
name
Kommentare zu diesen Handbüchern