
2 - 4 MP6000 INTEGRATOR GUIDE
Connecting a USB Interface
The MP6000 connects directly to a USB host. An additional power supply may be required
(PWRS-14000-148R). Only a USB Power Plus host can power the MP6000 using a Motorola Power Plus
cable, without an external power supply.
Figure 2-1
USB Connections
There are three possible USB connection methods for the MP6000:
•
POS connection using USB Power Plus (12V); requires a CBA-U52-S16PAR cable between POS
equipment (e.g., IBM) and the MP6000 POS RJ-45 connector. The MP6000 is a USB device for this
connection; no power supply is required (the MP6000 draws power from USB cable).
•
POS connection using USB Standard A (5V); requires a CBA-U51-S16ZAR cable between POS
equipment (standard device - PC) and MP6000 POS RJ-45 connector. The MP6000 is USB device but
requires an external power supply (MP6000 does NOT draw power from USB cable).
•
AUX scanner connection using a Motorola USB hand-held scanner; requires a Motorola USB type A
cable between the Motorola USB hand-held scanner (RJ-45), and the MP6000 AUX A-B USB port. The
MP6000 is the USB host, and the Motorola scanner is the USB device which draws power from 5V cable.
NOTE Interface cables vary depending on configuration.
Kommentare zu diesen Handbüchern