Motorola TETRA MTM800 Installationshandbuch PDF herunterladen (Seite 42)

42 MTM700/MTM800 Mobile Terminal / Installation Manual INSTALLATION

Dashboard Installation

Installing the Radio in an Automotive Dashboard

1. Open out the radio cut-out in the dashboard.

2. Remove the top plastic cover off the radio.

3. Insert the mounting frame into the cut-out and retain it by bending back the relevant fixing

tabs, using all 6 where possible, to hold it in place.

Figure 10 Mounting the Radio into the Dashboard (shown with Remote Mount Head)

TERMINAL

SPECIFIC

NOTE

Installation in the dashboard is only possible when the Transceiver Box is

assembled with a Remote Mount Head or a Expansion Head.

Dashboard Installation of the Transceiver Box equipped with a Standard Con-

trol Head is NOT possible !

RADIO

SPECIFIC

NOTE

The tabs are easily bent back by twisting a large flat-bladed screwdriver in the slot

behind the tabs.

For a more secure installation the top and rear of the frame should also be

secured with screws.

The demount tool can be used as an aid to mounting as well as demounting.

Tabs

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 81 82

Keine Kommentare

Motorola TETRA MTM800 Installationshandbuch Seite 42