Motorola MVME167 Bedienungsanleitung Seite 13

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 56
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 12
VME Single Board Computer
ICD 13—Standard Controller ICD-13/05 13 of 56
MVME167 Single Board Computer User’s Manual
Similar to the Installation Guide, in slightly more detail.
MVME167 Single Board Computer Support Information
External signal connections, board parts list, full circuit diagrams.
MVME166/167/187 Single Board Computer Programmers Reference Guide
Board-level hardware description, I/O chip register maps.
MVME167BUG 167BUG Debugging Package User’s Manual
Description of diagnostics and built-in test software.
Debugging Package for Motorola 68K CISC CPUs Users Manual
Other debugger commands, system calls, booting etc.
6.2 Installation
Before installation all VME cards should be visually inspected for damage, taking pre-
cautions over static electricity while handling the cards. Inspection should include
examining the pins inside the VMEbus connectors to ensure these have not been bent
out of alignment. Page 2-3 of the MVME167 SBC Users Manual gives a location dia-
gram for the jumpers on the card; these should be left at their factory default settings,
which are also given in Table 7.
Exceptions to the above settings are:
Jumper J1 1-2 will be removed if VxWorks is booted using bootp and tftp from the
debug monitor rather than using the VxWorks boot PROMs.
If some other card is installed in slot 0 as the VMEbus system controller, jumper J2
should be removed.
Jumpers J6 and J7 configure the direction of the two clock lines for serial port 4.
These may need to be altered if this is used as a synchronous port.
TABLE 6. VME Single Board Computer Specifications
Item Description
Model Number MVME167-033B
Manufacturer Motorola Inc.
Memory 16 MB
CPU 68040
Dimensions 1 slot x 6U
Input Power +5 V @ 3.5 A (typ), 4.5 A (max)
+12 V @ 1 A (max)
-12 V @ 0.1 A (max)
I/O Connections Via VME bus P2 connector
4 serial ports, 1 parallel port, 1 Ethernet port, 1 SCSI port
Temperature 0 to 55 degree C
Humidity 5 to 90% non-condensing
Seitenansicht 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare