Motorola USB08 Betriebsanleitung PDF herunterladen (Seite 71)

BEGIN

MACRO3 "[Xplor8]\Samples\Looptest.S19"

END

Playing MACRO4 in the above example thus:

Macro4

is equivalent to:

LD "[Xplor8]\Samples\Looptest.S19"

9.6 Playing and Recording M acros

9.6.1 Playing

Macros may be played by:

1. typing the macro name as a command on the command line, or

2. selecting a macro from the drop-down list adjacent to the 'Play' speedbutton, or

3. selecting a macro from the 'Play' item in the 'Macro' menu, or

4. clicking on the 'Play' speedbutton (provided a macro has been previously selected).

Only method 1. above allows the playing of macros that have Replaceable Parameters (see above),

since these must be added after the name.

For example, to play the macro MACRO1 listed in the Macros section above, the following command

would be issued:

MACRO1

As the macro plays, each line of the macro is copied to the command edit box and executed, just as

if it had been typed in by hand and the enter key pressed.

Macros may also be played via the 'Macros' menu and via the 'Play Macro' speedbutton.

Xplor8 may be configured automatically to stop playing a macro under certain conditions:

• If the macro contains an incorrectly formatted command, that is one that results in an error

message beginning with the '<--' characters, or

• The command is one that can have an unsuccessful result, e.g. a Verify command might result

in memory not being verified correctly.

These configurations are selected in Settings>Macros.

9.6.2 Recording

Macros may be recorded, i.e. the commands typed into the command edit box will be added to a macro

script. This is often referred to in other programs as 'learning' a macro. Access this via the Macro menu

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 99 100

Keine Kommentare

Motorola USB08 Betriebsanleitung Seite 71