Motorola USB08 Betriebsanleitung PDF herunterladen (Seite 52)

8.15 Mass Erase ME

Format:

ME [Address]

Command to mass erase all of FLASH memory. 'Address' is optional; if it is not included, or has any

value other than $FFFF, then a confirmatory dialog appears to make sure that you really do wish to

erase all the FLASH memory! By setting 'Address' to $FFFF, this dialog is skipped, which is useful

in macros.

This command is the only one which will work if the MCU is not unlocked by sending the correct

security bytes.

8.16 Mode Switch MODE

Format

MODE M

MODE U

Command to switch between monitor mode and user mode. Only available if the necessary hardware

is available on the target board, and the correct options have been chosen on the Settings>COM Port

tab. This command may also be issued using the 'Switch' speedbutton.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 99 100

Keine Kommentare

Motorola USB08 Betriebsanleitung Seite 52