Motorola AP6532 Installationsanleitung

M AP6532 Series Access PointInstallation Guide

Hardware Installation54. Connect a CAT-5 or better Ethernet cable to a compatible 802.3af power source and run the cable to the installation site. Ens

AP6532 Series Access Point: Installation Guide 6• Two wall anchors• Security cable (optional)NOTE In the event that the original mounting screws are

Hardware Installation72.4.2 Wall Mount Procedure1. Orient the case on the wall by its width or length.CAUTION To ensure proper operation of the AP6

AP6532 Series Access Point: Installation Guide 82. Using the arrows on one edge of the case as guides, move the edge to the midline of the mounting a

Hardware Installation92.5 Integrated Antenna Model Suspended Ceiling T-Bar Mount InstructionsCeiling mount requires holding the AP6532 Access Point

AP6532 Series Access Point: Installation Guide 102.6 External Antenna Model Wall Mount InstructionsWall mounting requires hanging the AP6532 Acces

Hardware Installation112.6.2 Wall Mount Procedure1. Orient the case on the wall by its width or length.2. Using the arrows on one edge of the case

AP6532 Series Access Point: Installation Guide 126. Place the large corner of each of the case’s mount slots over the screw heads.7. Slide the case d

Hardware Installation132.7.2 Ceiling Mount Procedure1. If possible, remove the ceiling tile from its frame and place it, finished side down, on a w

AP6532 Series Access Point: Installation Guide 142.8 AP6532 External Antenna Model Antenna OptionsMotorola Solutions supports two antenna suites f

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Sym-bol is a registered trademark of Symbol Technologies, Inc

Hardware Installation152.9 LED IndicatorsBoth Integrated Antenna and External Antenna models have LED activity indicators on the front of the case.

AP6532 Series Access Point: Installation Guide 163 Defining a Basic ConfigurationAn AP6532 Series access point can utilize an initial setup wizard to

Defining a Basic Configuration173. Enter the default username admin in the Username field.4. Enter the default password motorola in the Password field

AP6532 Series Access Point: Installation Guide 186. If this is the first time the management interface has been accessed, a dialogue displays to star

Defining a Basic Configuration19The first page of the Initial AP Setup Wizard displays the Navigation Panel and Introduction for the configuration act

AP6532 Series Access Point: Installation Guide 20A green checkmark to the left of an item in the Navigation Panel defines the listed task as having i

Defining a Basic Configuration219. Select an Access Point Type from the following options: • Virtual Controller AP - When more than one access point i

AP6532 Series Access Point: Installation Guide 22• Adopted to Controller - Select this option when deploying the access point as a controller managed

Defining a Basic Configuration2311. Select an Access Point Mode from the available options. • Router Mode - In Router Mode, the access point routes tr

AP6532 Series Access Point: Installation Guide 24

1 Introduction ... 11.1 Document Conventions ...

Defining a Basic Configuration2513. Set the following DHCP and Static IP Address/Subnet information for the LAN interface:• Use DHCP - Select the chec

AP6532 Series Access Point: Installation Guide 2615. Set the following DHCP and Static IP Address/Subnet information for the WAN interface:• Use DHCP

Defining a Basic Configuration2716. Select Next. The Initial AP Setup Wizard displays the Radio Configuration screen to define support for the 2.4GHz

AP6532 Series Access Point: Installation Guide 2817. Set the following parameters for the radio:• Configure as a Date Radio - Select this option to d

Defining a Basic Configuration29• Radio Frequency Band - Select either the 2.4GHz or 5.0GHz radio band to use with the radio when selected as a Data R

AP6532 Series Access Point: Installation Guide 3019. Set the following parameters for each of the two WLAN configurations available as part of this I

Defining a Basic Configuration31granted to the network. If using this option, define whether a local or external RADIUS authentication resource is use

AP6532 Series Access Point: Installation Guide 3221. Refer to the Username, Password, Description and Actions columns to review credentials of existi

Defining a Basic Configuration33• Confirm Password - Re-enter (or modify) the password as a means of confirming the password. This is a required param

AP6532 Series Access Point: Installation Guide 3425. Refer to the Country and Time Zone field to set the following device deployment information:• Lo

3 Defining a Basic Configuration ... 163.1 Using the Initial Setup Wizard ...

Defining a Basic Configuration35that can be transmitted. This is a required parameter.• Time Zone - Set the time zone where the access point is deploy

AP6532 Series Access Point: Installation Guide 3631. If the configuration displays as intended, select the Save/Commit button to implement these sett

Specifications374 Specifications4.1 AP6532 External Antenna Model Electrical CharacteristicsAn AP6532 External Antenna model Access Point has the f

AP6532 Series Access Point: Installation Guide 384.3 AP6532 Integrated Antenna Model Electrical CharacteristicsAn AP6532 Integrated model Access P

Specifications394.5 Radio CharacteristicsThe AP6532 model Access Points have the following radio characteristics: Operating Channels All channels f

AP6532 Series Access Point: Installation Guide 405 Regulatory Information5.1 Regulatory InformationThis device is approved under the Symbol Techno

Regulatory Information41Operation of the device without regulatory approval is illegal.5.2.1 Country Selection Select only the country in which you

AP6532 Series Access Point: Installation Guide 425.3.3 Safety in HospitalsWireless devices transmit radio frequency energy and may affect medical

Regulatory Information435.6 EuropeRemote and Standalone Antenna ConfigurationsTo comply with EU RF exposure requirements, antennas that are mounted

AP6532 Series Access Point: Installation Guide 445.9 Radio Frequency Interference Requirements—FCCNote: This equipment has been tested and found t

5.12 Statement of Compliance... 455.13 Waste Electrical and Electronic

Regulatory Information45This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device ma

AP6532 Series Access Point: Installation Guide 465.13 Waste Electrical and Electronic Equipment (WEEE)English: For EU Customers: All products at t

Regulatory Information475.14 TURKISH WEEE Statement of ComplianceEEE Yönetmeliğine Uygundur5.15 Japan (VCCI) - Voluntary Control Council for Int

AP6532 Series Access Point: Installation Guide 485.16 Korea Warning Statement for Class B ITE5.17 Other Countries5.17.1 AustraliaUse of 5 GH

Regulatory Information495.17.4 ChinaQuality Certificate in Chinese when the factory has ISO 9001 certification. 5.17.5 Mexico Restrict Frequenc

AP6532 Series Access Point: Installation Guide 505.17.7 Taiwan 臺灣低功率電波輻射性電機管理辦法第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功

Motorola Solutions Enterprise MobilitySupport Center516 Motorola Solutions Enterprise Mobility Support CenterIf you have a problem with your equipment

AP6532 Series Access Point: Installation Guide 527 AP6532 Series ROHS Compliance O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。X：表示该有毒有害物质至

MOTOROLA SOLUTIONS1303 E. ALGONQUIN ROADSCHAUMBURG, IL 60196http://www.motorolasolutions.com72E-149368-01 Revision BOctober 2011

Introduction11 IntroductionThe AP6532 Access Point, a component of the Motorola Solutions Wireless Controller System, links wireless 802.11a/b/g/n dev

AP6532 Series Access Point: Installation Guide 2• Verify there is adequate ventilation around the device, and that ambient temperatures meet equipmen

Introduction31.5 Features• One RJ-45 connector• LED indicators• Safety wire tie point• Slots for wall mounting• Clips for mounting on a suspended c

AP6532 Series Access Point: Installation Guide 42 Hardware Installation2.1 Installation InstructionsThe AP6532 Access Point mounts either on a wal