Motorola AP6532 Installationsanleitung PDF herunterladen (Seite 30)

Defining a Basic Configuration

13. Set the following DHCP and Static IP Address/Subnet information for the LAN interface:

• Use DHCP - Select the checkbox to enable an automatic network address configuration

using the access point’s DHCP server. An AP6532 access point does not have an onboard

DHCP server and an external DHCP server must be utilized.

• Static IP Address/Subnet - Enter an IP Address and a subnet for the access point's LAN

interface. If Use DHCP is selected, this field is not available. When selecting this option,

define the following DHCP Server and Domain Name Server (DNS) resources, as those

fields will become enabled on the bottom portion of the screen.

• Use on-board DHCP server to assign IP addresses to wireless clients -Select the

checkbox to enable the access point’s DHCP server to provide IP and DNS information

to clients on the LAN interface.

• Range - Enter a starting and ending IP Address range for client assignments on the

access point's LAN interface. Avoid assigning IP addresses from x.x.x.1 - x.x.x.10 and

x.x.x.255, as they are often reserved for standard network services. This is a required

parameter.

• Default Gateway - Define a default gateway address for use with the default

gateway. This is a required parameter.

• DNS Forwarding - Select this option to allow a DNS server to translate domain names

into IP addresses. If this option is not selected, a primary and secondary DNS resource

must be specified. DNS forwarding is useful when a request for a domain name is made

but the DNS server, responsible for converting the name into its corresponding IP

address, cannot locate the matching IP address.

• Primary DNS - Enter an IP Address for the main Domain Name Server providing DNS

services for the access point's LAN interface.

• Secondary DNS - Enter an IP Address for the backup Domain Name Server providing

DNS services for the access point's LAN interface

14. Select Next. The Initial AP Setup Wizard displays the WAN Configuration screen to set

the access point's WAN interface configuration.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 57 58

Keine Kommentare

Motorola AP6532 Installationsanleitung Seite 30