Motorola AP6532 Installationsanleitung PDF herunterladen (Seite 14)

Hardware Installation

2.5 Integrated Antenna Model Suspended Ceiling T-Bar Mount

Instructions

Ceiling mount requires holding the AP6532 Access Point up against a T-bar of a suspended ceiling

grid and twisting the case onto the T-bar.

2.5.1 Suspended Ceiling Mount Procedure

1. If required, install and attach a security cable to the unit’s lock port.

2. Plug the Ethernet cable into the unit and to a controller with an 802.3af compatible power

source.

3. Align the bottom of the T-bar with the back of the case.

4. Orient the case by its length, and the length of the T-bar.

5. Rotate the case 45 degrees clockwise, or about 10 o’clock.

6. Push the back of the case onto the bottom of the T-bar.

7. Rotate the case 45 degrees counter-clockwise. The clips click as they fasten to the T-bar.

8. Verify the unit has power by observing the LEDs.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 57 58

Keine Kommentare

Motorola AP6532 Installationsanleitung Seite 14