Motorola LS3578 Bedienungsanleitung PDF herunterladen (Seite 68)

4 - 24 Symbol LS3578 Product Reference Guide

Pairing Bar Code Format

When the scanner is configured as an SPP Master, you must create a pairing bar code for the remote Bluetooth

device to which the scanner can connect. You must know the Bluetooth address of the remote device. Pairing bar

codes are Code 128 bar codes and are formatted as follows:

<Fnc 3>Bxxxxxxxxxxxx

where:

•

B (or LNKB) is the prefix

•

xxxxxxxxxxxx represents the 12-character Bluetooth address.

Pairing Bar Code Example

If the remote device to which the scanner can connect has a Bluetooth address of 11:22:33:44:55:66, then the

pairing bar code is:

Connection Maintenance Interval

When a scanner disconnects from a cradle due to a Link Supervision Timeout, the scanner immediately attempts

to reconnect to the cradle for 30 seconds. If the auto-reconnect process fails, it can be restarted by pulling the

scanner trigger.

To guarantee that a disconnected scanner can reconnect when it comes back in range, the cradle reserves the

connection for that scanner for a period of time defined by the Connection Maintenance Interval. If the cradle is

supporting the maximum three scanners and one scanner disconnects, a fourth scanner cannot pair to the cradle

during this interval. To connect another scanner, either wait until the connection maintenance interval expires then

scan the PAIR bar code on the cradle with the new scanner; or scan Lock Override (page 4-22) with the new

scanner then scan the PAIR bar code on the cradle.

Connection Maintenance Interval options are:

•

15 minutes

•

30 minutes

•

One hour

•

Two hours

•

Four hours

•

Eight hours

Paring Bar Code Content:

‘B’ or ‘LNKB’ + Bluetooth Address

B112233445566

NOTE The Connection Maintenance Interval only applies in locked pairing mode (see page 4-22).

NOTE When the cradle supports the maximum three scanners, it stores the remote pairing address of each

scanner in memory regardless of the scanner condition (e.g., discharged battery). When you want to

change the scanners paired to the cradle, unpair each scanner currently connected to the cradle by

scanning the Unpairing bar code prior and reconnect each appropriate scanner by scanning the PAIR bar

code on the cradle.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 377 378

Kommentare zu diesen Handbüchern

Keine Kommentare

Motorola LS3578 Bedienungsanleitung Seite 68

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kommunikationszubehör Motorola LS3578