Motorola SG 2000 Betriebsanleitung PDF herunterladen (Seite 31)

-2

2 Installation

AT&T SLW2500 Installation and Operation Manual

CAUTION!

It is important that the connections at the headend be duplicated. If they are different from

the above recommendations, follow the scheme used for the headend connections.

WARNING!

To avoid possible injury to personnel or damage to the equipment, remove 60/90 volt ac

power from the system before you install the node.

3 Assemble the splice enclosure following the instructions furnished with the enclosure.

4 Complete the splicing and installation of the splice enclosure. Suspend the extra cable from

the messenger strand using locally accepted methods. Commonly used methods include

suspending it from the messenger along its entire length, and/or fashioning a figure eight

coil and suspending it from the messenger.

If the housing is to be installed at a later time, protect the end of the service cable with the

compression fitting and the fiber connectors from dirt and moisture.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 52 53

Keine Kommentare

Motorola SG 2000 Betriebsanleitung Seite 31