Motorola LM2000 Installationsanleitung PDF herunterladen (Seite 51)

3: Conﬁguring the Boot Parameters using the Local Console

DC 900-1331F 51

Step 4:

Conﬁgure the boot parameters as described in Table 3–1.

Table 3–1: Freeway System Boot Parameter Descriptions

Boot Parameter Description

Boot Device Freeway 2000/4000 with an MVME 162 CPU:

To boot over Ethernet from the primary Ethernet interface, set the

boot device to ee

To boot over Ethernet from the secondary Ethernet interface, set the

boot device to ll

To boot over FDDI from the boot server, set the boot device to ss

To boot from the internal hard disk, set the boot device to ss

Freeway 2000/4000 with an MVME 2600 CPU:

To boot over Ethernet from the primary Fast Ethernet interface, set the

boot device to dd

To boot over Ethernet from the secondary Fast Ethernet interface, set

the boot device to dd

To boot from the internal hard disk, set the boot device to ss

Processor Number The only valid number for this parameter is

FTP User Name If booting from the boot server, Freeway uses this name to log in to its

FTP (or RSH). The default is ff

. This is not required if you are

booting from the local disk.

FTP Password If booting from the boot server, Freeway uses this password to log in to

its user account. The default is pp

. This parameter is optional. If

a password is given, FTP is used during system boot; if it is cleared, the

remote shell (RSH) protocol is used.

Flags This parameter speciﬁes whether you want Freeway to autoboot two

seconds after system reset, seven seconds after system reset, or not at

all, and whether you want the version numbers of the .mem ﬁles

displayed.

Enter the

Flags value shown in Table 3–2 on page 53 that matches your

conﬁguration requirements. The default Flags value is 0. The Flags

word is an inclusive “OR” of the desired bits for the individual func-

tions.

Freeway Server Name Enter the system name assigned by the system administrator for this

Freeway.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 85 86

Keine Kommentare

Motorola LM2000 Installationsanleitung Seite 51