Motorola BC796D Betriebsanweisung PDF herunterladen (Seite 12)

ScanControl

One Program, Multiple Scanners, Made in USA

o To Button - Selects direction of data flow when All Channels and All Talkgroups

buttons are clicked. TO programs data to radio.

o All Channels Button – Click to copy all Banks, all Channels to / from the ScanControl

Memory Area. This button is disabled if no radio is connected. NOTE: This function

does not include programming Search Ranges into the BC898T, BC780XLT, BC250D,

BC296D, BC785D or BC796D. To program these values use the Edit Search Ranges

screen (see below).

o All TalkGrps Button – Click to copy all Trunked Bank ScanList Talkgroup IDs and

Fleet Map configurations to / from the ScanControl Memory Area. NOTE: This

function can only be performed AFTER the Channel frequencies have been

programmed by the “Program All Chnls” step described above. For the BC245XLT,

BC895XLT and PRO2052 this function will only be successful if the radio is receiving

the Control Channel for the Trunked Bank being programmed. This button is

disabled if no radio is connected.

OPERATING TIP: If you are not within receiving range of the Control Channel you can

enter the frequency of a local, known good Control Channel for a similar radio system into

the bank, program the channels for the Bank and then program the Talkgroups for the

Bank. This “fools” the radio into thinking it has a Control Channel while you are

programming the Talkgroups. Once the Talkgroups are programmed into the Radio you

can Lockout the “Dummy” Control Channel in the Bank.

o Clear Tags Checkbox (BC95XLT, BC245XLT, BC895XLT, BC898T, BCT8 &

PRO2052 Only) – Since alphanumeric tags are only stored in the ScanControl Memory

Area and not in these radios’ memory you have the option of retaining the existing tags or

clearing them whenever you perform a Channel or Talkgroup ID upload from the radio.

Checking the box will enable tag clearing, un-checking the box will disable tag clearing.

The default is to disable tag clearing. This checkbox is disabled if no radio is connected.

o Prog 0’s Checkbox – Checked enables the programming of 0 values. Unchecked

disables the programming of 0 values. The default for this control is checked. As

defaulted, when programming all Frequencies and TalkGroup IDs into scanner memory

ScanControl programs any 0 Frequency or Talkgroup ID values along with their alpha

tags and other data attributes during the programming process. If this box is unchecked

then; 1) 0 values along with their alpha tags and data attributes are skipped during the

programming process and 2) empty banks (all frequencies are 0000.0000) are skipped

entirely. This saves time during the programming process. A word of caution here … if

you uncheck this box thereby skipping 0 values in memory then any Frequency or

Talkgroup ID values already stored in radio memory WILL NOT be overwritten during

the programming process.

• Functions Section

o Control / Monitor Radio Button (BCT8, BC95XLT, BC245XLT, BC895XLT,

BC780XLT, BC250D, BC296D, BC785D, BC796D & PRO2052) – Launches the

Control / Monitor Radio Screen (See Below). This button is disabled if no radio is

connected.

o Program Options Button – Launches the Program Options screen. (See detail screen

description below.)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 85 86

Kommentare zu diesen Handbüchern

Keine Kommentare

Motorola BC796D Betriebsanweisung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Motorola BC796D