Motorola T3 Betriebsanweisung PDF herunterladen (Seite 8)

Motorola, Inc Page 8 of 24

1) Install the switch in the central telephone room

a) Install switch and other network devices in equipment rack

b) Interconnect the switch with the premises telephone wiring

2) Install the CPE devices

a) Install filters on all other phones

b) Enable line power, test

Type of Connectors Used

The T3 system employs three types of connectors.

1) DB9 straight wired serial connector used for console connections on the Switch

2) RJ45 connectors are used for Ethernet devices

3) 25-pair RJ21 connectors are used on the Switch to provide 25 downstream UTP wire ports

4) One RJ11 connector is used on the remote WallPlate for Line-in, and one for a filtered phone

port

a) xDSL and Power must be on pins 2-3

b) pins 1-4 are passed through the WallPlate

Bill of Materials

In addition to the Motorola T3 products, additional third party equipment is required.

Motorola Item Description

P/N

Qty Required

T3 PowerBroadband Switch 558975-001-00 One for every 25 end points

m2 Ethernet WallPlate 548478-001-00 One for each end point

MC-802 Wireless WallPlate 557925-001-00 One for every 4 to 6 rooms

RJ11 filter, inline 552689-001-00 One for every extra phone on the same

wire pair (WallPlate includes one

integrated filter)

12VDC regulated p/s, US 552305-001-00 Purchase a few for diagnostics

12VDC regulated p/s, UK 552307-001-00 Purchase a few for diagnostics

12VDC regulated p/s, EU 552306-001-00 Purchase a few for diagnostics

Third Party Item Description Qty Required

Siemens connectorized block p/n S66M2-5W-TP One for every T3 Switch

25-pair RJ21 Male-Male telco cable, ~3m to 5m Two for every T3 Switch

Ethernet cables, 2m (for CO equipment and in-room) As needed

RJ-21 Connector

Pins 1 and 26 are wire pair 1

Pins 25 and 50 are wire pair 25

RJ-11 Line-In Connector on WallPlate

Pins 2 and 3 are line 1

Pins 1 and 4 are line 2

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Keine Kommentare

Motorola T3 Betriebsanweisung Seite 8