
5 - 6 WT41N0 User Guide
1. Slide the wearable terminal into the wearable terminal slot.
2. The wearable terminal amber Charge Status LED indicates the wearable terminal battery charging status.
The standard capacity battery usually charges in less than four hours and the extended capacity battery
fully charges in less than eight hours. See Table 5-2 for charging status indications.
3. When charging is complete, remove the wearable terminal from the cradle.
LED Indicators (CRD4000-4000ER)
There are two LEDs on the front of the cradle. The green Speed LED lights to indicate that the transfer rate is
100 Mbps. When the LED is not lit the transfer rate is 10 Mbps. The yellow Link LED blinks to indicate activity,
or stays lit to indicate that a link is established. When it is not lit it indicates that there is no link.
LED Indicators (CRD4001-4000ER)
There are two green LEDs on the front of the cradle. These green LEDs light and blink to indicate the data
transfer rate. When the LEDs are not lit the transfer rate is 10 Mbps.
Table 5-3
CRD4000-4000ER LED Indicators
Data Rate Green Speed LED (Left) Yellow Link LED (right)
100 Mbps On On/Blink
10 Mbps Off On/Blink
Table 5-4
CRD4001-4000ER LED Indicators
Data Rate Left LED (Green) Right LED (Green)
1 Gbps On/Blink Off
100 Mbps Off On/Blink
10 Mbps Off Off
Kommentare zu diesen Handbüchern