Motorola SB1 Betriebsanweisung PDF herunterladen (Seite 18)

1 - 4 SB1 User Guide

Figure 1-4

Calibration Screen

Leave the SB1 in the cradle until it is fully charged. The LED indicates the SB1 battery charging status. The

battery fully charges in approximately four hours. See Table 1-1 on page 1-4 for charging status indications.

When the LED lights green remove the SB1 from the cradle.

Carefully press and briefly hold finger tip on the center of the Calibration screen target. Repeat the procedure

as the target moves and stops at different locations on the screen. After the calibration settings are input, tap

the screen to save the new calibration settings.

Table 1-1

LED Indicator

LED Indication

Off

SB1

not placed correctly in the cradle.

The cradle is not powered.

SB1 is not functioning properly.

Slow Blinking Amber

SB1

is charging.

Solid Green Charging is complete.

Fast Blinking Amber Charging error.

When using the SB1, if the battery charge falls below a predetermine level, it shuts down and displays the

Battery Discharged screen.

Figure 1-5

Battery Discharged Screen

When this occurs, recharge the SB1 battery by placing it into a charging cradle. The Battery Charging screen

appears on the display indicating that the battery is charging.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 81 82

Keine Kommentare

Motorola SB1 Betriebsanweisung Seite 18