Motorola Phaser P460 Spezifikationen PDF herunterladen (Seite 38)

3-6

P460/P360 Memory Scanners Product Reference Guide

Transmitting Batch/Stored Data to the Host

When you are ready to transmit your stored (Batch) data to the host, press the <FUNC>

key, then the <1> key. Then, place the scanner in the cradle or connect a communication

cable.

Note:When attached to a cable, the scanner will automatically begin

running the Scan & Transmit application. The stored (Batch) data will

not be transmitted to the host until the <FUNC> key, then the <1>

key are entered.

When the screen below appears, the scanner is ready to initiate the transfer. You have 30

seconds to either insert the scanner into a cradle or attach a communications cable. If you

fail to do so, a retry screen will appear.

To exit this mode and prevent the transmission of stored (Batch) data to the host, press the

<FUNC> key then the <BK> key. After the stored data is transmitted to the host, the

following screen appears:

Press the <ENTER> key to clear the transmitted records/data from the scanner’s memory.

Press the <BK> key to retain records/data in the scanner’s memory. If you press the <BK>

key, any subsequent scanned bar codes are appended to the end of the existing data.

Daisy-Chaining Cradles

Up to 12 cradles can be connected in series (daisy-chained) to communicate through a

single serial port. This out-of-the-box capability is a standard feature of the Phaser memory

scanner’s default Batch/Inventory application. To enable it, simply daisy-chain the cradles

together through COM2. See Setting Up the Cradle on page 2-4 for more details. Each

cradle still requires its own power supply.

Status:

Connect unit to host

Finished. Clear Data

<Enter>=Yes

<BK>=No

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 197 198

Keine Kommentare

Motorola Phaser P460 Spezifikationen Seite 38