Motorola XiR M8668 Betriebsanweisung PDF herunterladen (Seite 42)

Advanced Features

English

Scan

When you start a scan, your radio cycles through the

programmed scan list for the current channel looking for voice

activity.

The yellow LED blinks and the scan icon appears on the status

bar.

During a dual mode scan, if you are on a digital channel, and

your radio locks onto an analog channel, it automatically

switches from digital mode to analog mode for the duration of

the call. This is also true for the reverse.

There are two ways of initiating scan:

• Main Channel Scan (Manual): Your radio scans all the

channels/groups in your scan list. On entering scan, your

radio may – depending on the settings – automatically start

on the last scanned “active” channel/group or on the channel

where scan was initiated.

• Auto Scan (Automatic): Your radio automatically starts

scanning when you select a channel/group that has Auto

Scan enabled.

NOTE: This feature is not applicable in Capacity Plus and

Linked Capacity Plus.

Starting and Stopping Scan

Procedure:

Press the programmed Scan button to start or stop Scan. OR

Follow the procedure below.

1 Use the Scroll Up/Down buttons to select a channel

programmed with a scan list.

2 g to access the menu.

3 f or h to Scan and press g to select.

4 f or h to Scan State and press g to select.

5 f or h to required scan state and press g to select.

6 The display shows Scan On when scan is enabled. The

yellow LED blinks and the scan icon appears.

The display shows Scan Off if scan is disabled. The LED

turns off and the scan icon disappears.

While scanning, the radio can only accept data (e.g. text

message, location, telemetry, or PC data) if received on its

Selected Channel.



1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 111 112

Hamed 19 Apr 2024 | 06:45:18

Motorola XiR M8668 Betriebsanweisung Seite 42