Motorola XiR M8668 Betriebsanweisung PDF herunterladen (Seite 19)

Identifying Radio Controls

English

To use the Scroll Up/Down buttons, while in the Home

Screen of the required Zone, press f or h to select

the required channel.

To use the programmed Channel Up or Channel

Down buttons, while in the Home Screen of the

required Zone, press Channel Up or Channel Down

to select the required channel.

Using the Volume/Channel Knob

The Volume/Channel Knob can be programmed as dual

purpose for both volume and channel or as a volume-only

control.

To adjust volume, see Adjusting the Volume on page 3.

To change channels, push and hold the knob until channel

selection screen is displayed, then turn the knob to the required

channel.

To exit channel selection state, do any of the following.

• Push the Volume/Channel Knob again

• Press g

• Press e

•

Wait for the menu timer to expire

IP Site Connect

This feature allows your radio to extend conventional

communication beyond the reach of a single site, by connecting

to different available sites which are connected via an Internet

Protocol (IP) network.

When the radio moves out of range from one site and into the

range of another, it connects to the new site's repeater to send

or receive calls/data transmissions. Depending on your settings,

this is done automatically or manually.

If the radio is set to do this automatically, it scans through all

available sites when the signal from the current site is weak or

when the radio is unable to detect any signal from the current

site. It then locks on to the repeater with the strongest Received

Signal Strength Indicator (RSSI) value.

In a manual site search, the radio searches for the next site in

the roam list that is currently in range (but which may not have

the strongest signal) and locks on to it.

NOTE: Each channel can only have either Scan or Roam

enabled, not both at the same time.

Channels with this feature enabled can be added to a particular

roam list. The radio searches the channel(s) in the roam list

during the automatic roam operation to locate the best site.

A roam list supports a maximum of 16 channels (including the

Selected Channel).

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 111 112

Kommentare zu diesen Handbüchern

Hamed 19 Apr 2024 | 06:45:18

Motorola XiR M8668 Betriebsanweisung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Funkgeräte Motorola XiR M8668