Motorola DCT6416 Bedienungsanleitung Seite 29

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 69
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 28
3-14 Installation
Code Description When Error Occurs Action Required
Eb 11
Failed to lock OOB
frequency
After cycling twice through the OOB
frequencies (LED then displays Eb 02
indicating the software object download
was unsuccessful)
Ensure proper cable
connections
Eb 12
No COAC message
received
After cycling twice through the OOB
frequencies (LED then displays Eb 02
indicating the software object download
was unsuccessful)
Contact headend
operator
Eb 13
No DLC message
received
After cycling twice through the OOB
frequencies (LED then displays Eb 02
indicating the software object download
was unsuccessful)
Contact headend
operator
Eb 14
Bad object type or class After the LED displays dl, indicating failed
during attempted download
Contact headend
operator
Eb15
No matching Platform
ID found
After cycling twice through the OOB
frequencies (LED then displays Eb 02
indicating the software object download
was unsuccessful)
Contact headend
operator
Eb18
Object size mismatch After the LED displays dl, indicating failed
during attempted download
Contact headend
operator
Eb19
Object size failed range
check
After the LED displays dl, indicating failed
during attempted download
Contact headend
operator
Eb20
Invalid SUDB pointer After plugging the terminal into an electrical
outlet to begin the boot cycle
None
Operational Check for the Remote Control
The operational check tests communication with the remote control:
Table 3-3
Operational check procedures
Feature Testing Procedure
Power on Press POWER on the remote control to turn on the DCT6400.
Tune to the output channel (3 or 4).
Channel selection Scan through the channels using the
CHANNEL + or - keys.
Tune to several channels by entering the channel number using the numeric keys.
Volume control Press
VOLUME + or - on the remote control to increase the volume to its upper limit,
lowest level, and to a comfortable level.
Press
MUTE to turn the sound off. Press MUTE again to restore the sound.
If the DCT6400 does not operate properly, refer to Section 5, “Troubleshooting.
DCT6400 Phase III Installation Manual
Seitenansicht 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 68 69

Kommentare zu diesen Handbüchern

Keine Kommentare