Connection Sequence
This manual supports connecting the preprocessor to a stand-alone
logic analyzer or to a prototype analyzer system.
Disconnect power from the logic analyzer and your target system
before you make or break connections. If you have a processor probe,
also disconnect its power.
The connection flow is as follows:
1. Set switches, if necessary, on the preprocessor board.
2. Connect the transition board to the preprocessor interface.
3. Connect preprocessor/transition board to the probe adapter.
4. Connect the probe adapter to the target system.
5. Connect the logic analyzer cables to the preprocessor interface.
6. If you have a processor probe, connect it to the preprocessor.
7. If you have a processor probe, connect it to your controller (prototype
analyzer, workstation, PC).
8. Load configuration and inverse assembler files into the logic analyzer.
9. If you have a prototype analyzer, load the prototype analyzer configuration
files into the prototype analyzer.
1-10 E2480A Motorola CPU32 Preprocessor Interface
Kommentare zu diesen Handbüchern