Motorola AT Commands G24-L Technical Information

Technical InformationMotorola G24 Developer’s GuideAT Commands Reference ManualAUGUST 5, 20086889192V28-K

Table of Contentsvi AT Commands Reference Manual August 5, 2008Network Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Call Control3-12 AT Commands Reference Manual August 5, 2008Switching From Data Mode to Command Mode To switch the connection from Data mode to Comma

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-13Call Control AT CommandsD, Dial Command This command places a FAX/DA

Call Control3-14 AT Commands Reference Manual August 5, 2008The following table shows the D parameters.Note: ATDP, ATDT, AT*D, <T>, <P> a

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-15The following table shows a detailed description for the D> comma

Call Control3-16 AT Commands Reference Manual August 5, 2008atd>1; //Speed dial from phonebookOKOKathNO CARRIEROKatd>1 //Speed dial from phoneb

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-17• ATDL; (Voice) dials the exact number that was last dialed, includi

Call Control3-18 AT Commands Reference Manual August 5, 2008ExampleRING //Incoming callRING //Incoming callath //Hang-up incoming call NO CARRIEROK

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-19A, Answer Incoming Call This command answers an incoming VOICE/DATA/

Call Control3-20 AT Commands Reference Manual August 5, 2008RING/+CRING Indication+CRING: <type>or:RINGThe following table shows the +CRC param

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-21RINGAT+CRC=1 //Enable extended ring formatOK+CRING: REL ASYNC+CRING:

Table of ContentsAugust 5, 2008 AT Commands Reference Manual viiAdvanced Audio Setup Commands . . . . . . . . . . . . . . . . . . . . . . . . . . .

Call Control3-22 AT Commands Reference Manual August 5, 2008The following table shows the +CLIP parameters.ExampleAT+CLIP=?+CLIP: (000,001) //CLI pre

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-23+CCWA, Call Waiting CommandThis command controls the Call Waiting su

Call Control3-24 AT Commands Reference Manual August 5, 2008The following table shows the +CCWA parameters.Note: When the parameter <mode> is 2

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-25OKExamples of +CCWA set command - network interrogation AT+CCWA=1,2

Call Control3-26 AT Commands Reference Manual August 5, 2008disconnected or separated (removed from the MTPY call, but remain connected to theserved

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-27The following table shows the +CHLD actions according to state and o

Call Control3-28 AT Commands Reference Manual August 5, 2008ExampleAT+CHLD=?+CHLD: (0,1,1x,2,2x,3)OKAT+CCWA=1 //Enable call waiting OKatd9311234567;

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-29OK+CCWA: "055728386",129,1,"",0 //Waiting call

Call Control3-30 AT Commands Reference Manual August 5, 2008The following table shows the +CCFC parameters.Note: A forward-to phone <number> (a

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-31ExampleAT+CCFC=?+CCFC: (0,1,2,3,4,5)OKAT+CCFC=0,3,"01256316830&

Table of Contentsviii AT Commands Reference Manual August 5, 2008Error Handling Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Call Control3-32 AT Commands Reference Manual August 5, 2008the Temporary mode state. This can also be done when the service is in state B and the te

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-33athNO CARRIEROKAT+CLIR=0OKatd054565195; //MO voice call OK(… calling

Call Control3-34 AT Commands Reference Manual August 5, 2008The following table shows the +CBST parameters.ExampleAT+CBST=?+CBST: (000,004,006,007,01

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-35The ESC command +++, transfers the phone to the Command mode (able t

Call Control3-36 AT Commands Reference Manual August 5, 2008+CSNS, Single Numbering Call SchemeThis command handles the selection of the bearer or te

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-37The following table shows the AT+CSNS parameters.Note: Any mobile-te

Call Control3-38 AT Commands Reference Manual August 5, 2008The only +CBST parameter that needs mapping for mobile terminated calls is <speed>,

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-39ExampleAT+MDC=?+MDC: (0-1)OKAT+MDC=1OKATD<number>;OKCONNECTAT+

Call Control3-40 AT Commands Reference Manual August 5, 2008+MFIC, Filtering Incoming CallsThis command instructs the G24 to query or set Filtering I

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-41The following table shows the +MFIC parameters.ExampleAT+MFIC=?+MFIC

Table of ContentsAugust 5, 2008 AT Commands Reference Manual ixTCP/IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Call Control3-42 AT Commands Reference Manual August 5, 2008+MHUP, Motorola Hung UP callThis command hung up specific call or all calls, and report a

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-43+MVC, Motorola Vocoders ConfigurationThis AT command is used to choo

Call Control3-44 AT Commands Reference Manual August 5, 2008The meaning of the AT+MVC=1,1,3,5 command is: The modem is able to support GSM full rate

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-45The following table shows the +MTTY parameters.Notes:VCO: Voice Car

Call Control3-46 AT Commands Reference Manual August 5, 2008OKAT+MTTY?+MTTY: 1OKCall Status Messages+CPAS, Phone Activity Status This command display

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-47+CPAS: 4OKAT+CPAS //Voice call active state+CPAS: 4OK+CLCC, List Cur

Call Control3-48 AT Commands Reference Manual August 5, 2008The following table shows the +CLCC parameters.Note: When a mobile-originated call is rou

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-49+CLCC: 0OKAT+CLCC=1 //Example with unsolicited indicationOKATD055490

Call Control3-50 AT Commands Reference Manual August 5, 2008+MCST ParametersThe following table shows the +MCST parameters.ExampleAT+MCST?+MCST: /

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-51+MCST: 3+MCST: 17NO CARRIER+MCST: 1+TCLCC, List Current CallsThis co

Table of Contentsx AT Commands Reference Manual August 5, 2008RS232 Multiplexer Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Call Control3-52 AT Commands Reference Manual August 5, 2008The following table shows the +TCLCC parameters.ExampleAT+TCLCC=1OKAT+TCLCC?+TCLCC: 1OKAT

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-53OK+TCLCC: 1,0,4,1,0,,"035659801",1 // Call on holdATD0502

Call Control3-54 AT Commands Reference Manual August 5, 2008The following table shows the +MNTFY parameters.ExampleAT+MNTFY=?+MNTFY: (0,1)OKAT+MNTFY?

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-55Call Advice of Charge CommandsThis set of commands enables GSM opera

Call Control3-56 AT Commands Reference Manual August 5, 2008• In IDLE state - returns the last call cost.• In a voice/data state - returns the accumu

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-57+CAOC: "000009"OK+CCCM: "00000e"+CCCM: "000

Call Control3-58 AT Commands Reference Manual August 5, 2008Refer to “+CAMM, Accumulated Call Meter Maximum”, page 3-58.The following table shows the

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-59The following table shows the +CAMM parameters.ExampleAT+CAMM=?OKAT+

Call Control3-60 AT Commands Reference Manual August 5, 2008+CPUC, Price per Unit and Currency TableThis command sets the parameters of the Advice of

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-61Note: If <ppu> contains a dot, a maximum of three digits may a

Table of ContentsAugust 5, 2008 AT Commands Reference Manual xiEstablishing GPRS PDP Context . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Call Control3-62 AT Commands Reference Manual August 5, 2008ExampleAT+CR=1 //Enable reportingOKATD1234567890+CR: REL ASYNCSupplementary ServicesThis

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-63The following table shows the +CSSN parameters. Table 3-31:+CSSN Par

Call Control3-64 AT Commands Reference Manual August 5, 2008ExampleAT+CSSN=? // test command+CSSN: (0-1),(0-1)OKAT+CSSN=0,0 // disable both options O

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-65+CUSD, Unstructured Supplementary Service DataThis command allows co

Call Control3-66 AT Commands Reference Manual August 5, 2008<dcs> GSM 03.38 - Cell Broadcast Data Coding Scheme in integer format. The supporte

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-67ExampleAT+CUSD=1,"*00*0549598743#"+CUSD: 0,"Connectin

Call Control3-68 AT Commands Reference Manual August 5, 2008NETWORK_BUSY 28NOT_SUBSCRIBED 29SERVICE_UNAVAILABLE 31SERVICE_NOT_SUPPORTED 32PREPAY_LIMI

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-69+COLP, Connected Line Identification PresentationThis command relate

Call Control3-70 AT Commands Reference Manual August 5, 2008The following table shows the +COLP parameters.ExampleAT+COLP=0OKAT+COLP=2+CME ERROR: Num

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-71Phone and Date Books and ClockDirectory Access Commands - Phone Book

Table of Contentsxii AT Commands Reference Manual August 5, 2008MUX-Init State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Phone and Date Books and Clock3-72 AT Commands Reference Manual August 5, 2008The following table shows the +CPBS parameters.ExampleAT+CPBS="ME&

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-73AT+CPBW=1,"034546565",129,"xyz"// Write into FD

Phone and Date Books and Clock3-74 AT Commands Reference Manual August 5, 2008The following table shows the +CPBR parameters.Note: The MC and RC have

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-75+CPBF, Find Phone Book Entries This execution command enables the us

Phone and Date Books and Clock3-76 AT Commands Reference Manual August 5, 2008+CPBF: 2,"8475767800",129,"Moto Voicemail"+CPBF: 10

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-77The following table shows the +CPBW parameters.ExampleAT+CPBS="

Phone and Date Books and Clock3-78 AT Commands Reference Manual August 5, 2008The following table shows the +CSVM parameters.Note: If <mode> is

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-79In MUX mode, this AT command is allowed on DLC2 only.Command Type Sy

Phone and Date Books and Clock3-80 AT Commands Reference Manual August 5, 2008The following table shows the +MDSI parameters.ExampleAT+MDSI?+MDSI: 0T

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-81OKAT+MDSI=?+MDSI: (000,001)OKAT+MDSI=1OK//Until now there was no dea

August 5, 2008 AT Commands Reference Manual xiii1-1 System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Phone and Date Books and Clock3-82 AT Commands Reference Manual August 5, 2008If only a pair of <mode> and <index> values are given, then

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-83The following table shows the +MCSN parameters.ExampleAT+CNUM // Rea

Phone and Date Books and Clock3-84 AT Commands Reference Manual August 5, 2008+CNUM: "PIN2","8523",129+CNUM: "","&

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-85+MPDPM, Motorola Phonebook Dynamic Percentage MemoryThis command ret

Phone and Date Books and Clock3-86 AT Commands Reference Manual August 5, 2008OKAT+CPBW=,"035658027",129,"Phone7" OKAT+CPBW=,&quo

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-87ExampleThe example illustrates wakeup of two reminders.+MALARM: 1,&q

Phone and Date Books and Clock3-88 AT Commands Reference Manual August 5, 2008OKAT+MALMH+CME ERROR: operation not allowed+MDBGD, Defines General Sett

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-89The following table shows the +MDBGD parameters.ExampleAT+MDBGD=1,12

Phone and Date Books and Clock3-90 AT Commands Reference Manual August 5, 2008This command is a non-basic command, which means that the G24 module re

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-91ExampleAT+MDBR=1,10+MDBR:3,"13:30","07/02/15",&q

List of Figuresxiv AT Commands Reference Manual August 5, 20084-11 Sleep Mode when S24 > 0 . . . . . . . . . . . . . . . . . . . . . . . . . . .

Phone and Date Books and Clock3-92 AT Commands Reference Manual August 5, 2008This command is a non-basic command, which means that the G24 module re

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-93ExampleThe first example illustrates store entry in index 1 into dat

Phone and Date Books and Clock3-94 AT Commands Reference Manual August 5, 2008This command is a non-basic command, which means that the G24 module re

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-95The third example illustrates delete exception instance 4 from entry

Phone and Date Books and Clock3-96 AT Commands Reference Manual August 5, 2008System Date and Time Access Commands+CCLK, Read/Set System Date and Tim

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-97The following table shows the +CCLK parameters.ExampleAT+CCLK=?+CCLK

SMS3-98 AT Commands Reference Manual August 5, 2008SMSSMS CommandsG24 supports SMS PDU and SMS TEXT mode according to ETSI specifications 07.05 &

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-99ExampleAT+CSMS=128 +CSMS: 001,001,001OKAT+CSMS? +CSMS: 128,001,001,0

SMS3-100 AT Commands Reference Manual August 5, 2008The following table shows the +CPMS parameters.Note: The value 'Total' is the total num

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-101+CMGF, Message Format This command is a basic command. The Set comm

August 5, 2008 AT Commands Reference Manual xv1-1 AT Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SMS3-102 AT Commands Reference Manual August 5, 2008The following table shows the +CSCA input characters and their hexadecimal values. Table 3-54:

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-103The following table shows the +CSCA parameters.ExampleAT+CSCA="

SMS3-104 AT Commands Reference Manual August 5, 2008+CSMP, Set Text Mode ParametersThis command is a basic command and is used to select values for a

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-105ExampleAT+CSMP?+CSMP: 17,167,0,0 (default values for SMS-SUBMIT)OKA

SMS3-106 AT Commands Reference Manual August 5, 2008+CSDH, Show Text Mode ParametersThis command controls whether detailed header information is show

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-107+CNMI, New Message Indications to Terminal This command handles ena

SMS3-108 AT Commands Reference Manual August 5, 2008AT+CNMI? +CNMI: 0,0,0,0OKAT+CNMI=3,1 OKAT+CMSS=142,"0544565034" // send to myself+CMSS:

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-109When the G24 sends a +CDS response to the terminal, it waits a pred

SMS3-110 AT Commands Reference Manual August 5, 2008AT+CNMI?+CNMI: 0,0,0,1,0OKAT+CMSS=295+CMSS: 184OK+CDS: 6,184,"+972524680592",145,"

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-111In text mode: (+CMGF=1):+CMT: <oa>,<scts>[,<tooa>

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICENoticeWhile reasonable efforts have been made to assure the accuracy of this document, Motorola, Inc. a

List of Tablesxvi AT Commands Reference Manual August 5, 20083-43 +MCSN Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SMS3-112 AT Commands Reference Manual August 5, 2008AT+CMGS=18 // send to myself> 079179521201009511000c917952446505430004AA0441424344+CMGS: 70OK

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-113Unsolicited Response+CDSI: <mem>,<index>The following t

SMS3-114 AT Commands Reference Manual August 5, 2008The following table shows the +CDS parameters.After sending a +CDS unsolicited response to the TE

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-115The +MMGL command does not change the message status. In addition,

SMS3-116 AT Commands Reference Manual August 5, 2008The following table shows the +CGML/+MMGL parameters.Table 3-65:+CGML/+MMGL Parameters<Paramet

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-117ExampleAT+CMGL=?+CMGL: ("REC UNREAD","REC READ"

SMS3-118 AT Commands Reference Manual August 5, 2008+CMGR, +MMGR, Read MessageThese commands handle the reading of SMs. The command displays the mess

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-119The following table shows the +CMGR parameters. Table 3-66:+C

SMS3-120 AT Commands Reference Manual August 5, 2008Note: Any unused bits will be set to zero and shall be ignored by the receiving entity.<pages&

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-121 Table 3-68: <fo> for SMS-DELIVER MessageBit/s Reference Des

List of TablesAugust 5, 2008 AT Commands Reference Manual xvii3-97 +MEMD Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SMS3-122 AT Commands Reference Manual August 5, 2008<TP-RA> Mandatory:Recipient address formatted according to the formatting rules of address

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-123Note: Reserved bits are ignored.Table 3-70: <fo> for SMS-STAT

SMS3-124 AT Commands Reference Manual August 5, 2008ExampleAT+CPMS?+CPMS: "ME",5,59,"ME",5,59,"SM",5,20OKAT+CMGR=1+CMS

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-125+MMAR, Motorola Mark As Read This command handles changing the <

SMS3-126 AT Commands Reference Manual August 5, 2008When the given index is an incoming message index the header settings will be as follows:• <fi

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-127+CMGW, Write Message to Memory This command is used to write and sa

SMS3-128 AT Commands Reference Manual August 5, 2008Table 3-75: Layout of SMS-SUBMIT in PDU Mode: (according to GSM03.40)Reference Description Length

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-129<TP-CDL> Command data length 1 BYTE<TP-CD> Command data

SMS3-130 AT Commands Reference Manual August 5, 2008Note: Any unused bits will be set to 0.ExampleAT+CMGF=1OKAT+CMGW="5124335432">This i

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-13100410042004300440045OKAT+CSMP=25,"05/03/15,21:22:23+08",0

List of Tablesxviii AT Commands Reference Manual August 5, 20083-151 Basic and Advanced Audio Modes Comparison . . . . . . . . . . . . . . . . . . .

SMS3-132 AT Commands Reference Manual August 5, 2008+CMGD, Delete Message This command handles deletion of a single message from memory location <

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-133+CGSMS, Select Service for MO SMS MessagesThis command handles the

SMS3-134 AT Commands Reference Manual August 5, 2008+CMGS, Send SM to NetworkThis command sends an SM from the G24 to the network. The message refere

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-135If after aborting AT+CMGS command execution and before result of op

SMS3-136 AT Commands Reference Manual August 5, 2008The following table shows the AT+CSCB parameters.Notes:• A combination of discrete values or inte

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-137OKAdding channels 3, 4,5,6,22 to mid list and languages 1,8 to dcs

SMS3-138 AT Commands Reference Manual August 5, 2008The following table shows the +MCSAT parameters.Table 3-83:+MCSAT Parameters<Parameter> Des

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-139ExampleAT+MCSAT=?+MCSAT:(0-2)OKAT+MCSAT?+MCSAT: 1OKAT+MCSAT=2OKAT+M

SMS3-140 AT Commands Reference Manual August 5, 2008Read+ MEDT? +MEDT: <mode> OKThe read command returns the current setting.TestAT+MEDT=? +MED

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-141The following table shows the +MEDT parameters.Table 3-84: +MEDT Pa

List of TablesAugust 5, 2008 AT Commands Reference Manual xix3-205 &Y Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SMS3-142 AT Commands Reference Manual August 5, 2008Note: All AT+MEDT settings will be saved in FLEX and after power up will behave according to the

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-143+TSMSRET, Control SMS Sending RetryThis command controls the SMS se

SMS3-144 AT Commands Reference Manual August 5, 2008In a case that the RI indication was enabled for one of the above SMS types, the RI line will be

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-145+CMGS: 11OK // RI is asserted for 1.5 seconds// The next example

SMS3-146 AT Commands Reference Manual August 5, 2008Table 3-87 shows the conversion between the <dcs> and +CSCS setting when storing SM to memo

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-147Table 3-88 shows the conversion between the <dcs> and +CSCS s

SMS3-148 AT Commands Reference Manual August 5, 2008OKAT+CMGR=223+CMGR: "STO UNSENT","0544565803",050003090301123456786543FEOKAT+

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-149AT+CMGR=227+CMGR: "STO UNSENT","0544565803",ADA

Email3-150 AT Commands Reference Manual August 5, 2008EmailEmail Services AT Commands+MEMISP, Email Account ISP (Internet Service Provider) SettingsT

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-151Example:AT+MEMISP=? +MEMISP: (64),(48),(40),(NNN.NNN.NNN.NNN)OKAT+M

List of Tablesxx AT Commands Reference Manual August 5, 20083-258 Set Event List Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Email3-152 AT Commands Reference Manual August 5, 2008The following table shows the +MEMAS parameters.TestAT+MEMAS=? +MEMAS: maximum allowed length f

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-153Example:AT+MEMAS=?+MEMAS:(15),(48),(40),(100),(40),(0-65535),(40),(

Email3-154 AT Commands Reference Manual August 5, 20086. If the operation (send or receive) will proceed, or not, after security warning alert presen

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-155Example:AT+MEMGS=?+MEMGS: (0-1),(0-65535),(100),(0-1),(0-1),(0-1)OK

Email3-156 AT Commands Reference Manual August 5, 2008The following table shows the +MEMDE parameters.Example:AT+MEMDE=0OKNO CARRIER // GPRS connecti

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-157+MEMSE, Send Email MessageThis AT command is used to connect to mai

Email3-158 AT Commands Reference Manual August 5, 2008Example:AT+MEMSE=113OKNO CARRIER // GPRS connection is closed at the end of processAT+MEMSE=11

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-15913 Size of the message is OK 49 SMTP Logging-out started14 Can&apos

Email3-160 AT Commands Reference Manual August 5, 2008+MEML, List Email MessagesThis AT command is used to display a list of all Email messages from

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-161<status> Status of the message (can be a combination of statu

August 5, 2008 AT Commands Reference Manual xxiPrefaceManual ScopeThis manual introduces the G24 AT commands, and describes how software developers ca

Email3-162 AT Commands Reference Manual August 5, 2008Example:AT+MEML=0+MEML:115,0,"[email protected]","[email protected],aaaaaaa

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-163+MEMR, Read Email MessageThis AT command is used to display an emai

Email3-164 AT Commands Reference Manual August 5, 2008Example:AT+MEMR=109+MEMR:0,"[email protected]","[email protected]","mike@mai

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-165The following table shows the +MEMD parameters.Example:AT+MEMD=0,11

Email3-166 AT Commands Reference Manual August 5, 2008+MEMW, Write or Update Email MessageThis AT command is used to write a new email message or upd

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-167Updating emailAT+MEMW=1,109,"[email protected]" //update an e

Email3-168 AT Commands Reference Manual August 5, 2008ExampleAT+MEGA="4252833433"OKAT+MEGA?+MEGA: "4252833433"OK

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-169NetworkNetwork Commands+CSQ, Signal StrengthThis command displays t

Network3-170 AT Commands Reference Manual August 5, 2008+CRLP, Radio Link ProtocolThis command displays the Radio Link Protocol parameters that are u

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-171+CREG, Network Registration StatusThe following table shows the +CR

Applicable Documentsxxii AT Commands Reference Manual August 5, 2008Applicable Documents• G24 Module Hardware Description – 6889192V27• G24 Developer

Network3-172 AT Commands Reference Manual August 5, 2008ExampleAT+CREG=? +CREG: (000 - 002)OK AT+CREG? +CREG: 000,001 OK AT+CREG=2 OKAT+CREG?+CREG: 0

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-173+CGREG, GPRS Network Registration The following table shows the +CG

Network3-174 AT Commands Reference Manual August 5, 2008ExampleAT+CGREG=?+CGREG: (000-002)OKAT+CGREG=2OKAT+CGREG?+CGREG: 002,001,2648,988bOKAT+CGREG=

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-175Command TypeSyntax Response/Action RemarksSetAT+COPS=[<mode>[

Network3-176 AT Commands Reference Manual August 5, 2008The following table shows the +COPS parameters.ExampleAT+COPS=? +COPS:(002,"IL ORANGE&qu

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-177+CPOL, Preferred OperatorsThis command is used to edit the PLMN sel

Network3-178 AT Commands Reference Manual August 5, 2008Note 1:• If <index> is given but <oper> is left out, entry is deleted.• If <op

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-179+CPLS, Selection of Preferred PLMN List.This AT command is used to

Network3-180 AT Commands Reference Manual August 5, 2008+CPLS:(0,1,2)OKAT+CPLS=1OKAT+CPLS?+CPLS: 1,"OPLMNwACT"OK+MFS, Motorola Frequency of

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-181The following table shows the +MFS parameters. ExampleAT+MFS=? //T

Preface August 5, 2008 AT Commands Reference Manual xxiiiManual Banner DefinitionsA banner text in the page footer under the book title (for example,

Network3-182 AT Commands Reference Manual August 5, 2008+MFS: 2,1//POWER CYCLE phoneAT+MFS? //Previous values restored after power up.+MFS: 2,1OKAT+

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-183The following table shows the +MCELL parameters. Table 3-108: +MCE

Network3-184 AT Commands Reference Manual August 5, 2008ExampleAT+MCELL = 0,1+MCELL: Serving Idle/PIBC0077s* 50-071BBC0077 Gpid39051h04p00+33+33-104t

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-185trc* thp* rb****des* dor* er****sdu**** tsfd****ulmax ** gr **dlm

Network3-186 AT Commands Reference Manual August 5, 2008Table 3-113: TBF Uplink Data Transfer ScreenB C 0 0 6 7 1 5 - 0 6 7 B Channel Type (PD)TCH AR

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-187Table 3-114: TBF Downlink Data Transfer ScreenTable 3-115: Neighbor

Network3-188 AT Commands Reference Manual August 5, 2008Table 3-117: Reselection ScreenTable 3-118: Hopping Information ScreenTable 3-119: PDP Contex

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-189Table 3-120: I-PI Serving Cell Paging Parameters ScreenTable 3-121:

Network3-190 AT Commands Reference Manual August 5, 2008The following table provides definitions for EFEM-related terms.Table 3-123:EFEM ParametersAb

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-191Cell ID Cell Identity parameter, from System Info 3.CellResHys Cell

Caring for the Environmentxxiv AT Commands Reference Manual August 5, 2008Keep away from live circuitsOperating personnel must:• not remove equipment

Network3-192 AT Commands Reference Manual August 5, 2008Max bit rate dl Max bit rate for Downlink in KPBS.Max bit rate ul Max bit rate for Uplink in

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-193split_pg_cycle Number of paging blocks to read on the serving cell

Network3-194 AT Commands Reference Manual August 5, 2008+ MGAUTH, Enable Authentication Protocol Setting (CHAP/PAP)This command enables Authenticatio

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-195AT+ MGAUTH =1OK // set Authentication protocol as CHAPAT+ MGAUTH? +

Network3-196 AT Commands Reference Manual August 5, 2008The following table shows the +MCI parameters.ReadAT+MCI? +MCI: <Filter>,[<bitmask&g

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-197ExampleAT+MCI // Get the current serving and neighbour's info

Network3-198 AT Commands Reference Manual August 5, 2008Default value: On first power up, the jamming detector is not active (i.e. the default value

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-199AT+MJDC?+MJDC: 0 // jamming detector is disableOKAT+MJDC=?+MJDC: (0

Hardware Information3-200 AT Commands Reference Manual August 5, 2008Hardware InformationHardware Information Commands+CBC, Battery Charger Connectio

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-201OKNote: The battery level is an average value, which updated once i

Preface August 5, 2008 AT Commands Reference Manual xxvPlease contact the Customer Network Resolution Center (CNRC) for assistance. The 24 hour telep

Hardware Information3-202 AT Commands Reference Manual August 5, 2008The following table shows the +CBAUD parameters.ExampleAT+CBAUD=57600orAT+CBAUD=

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-203Using AT+IPR=<rate> with a <rate> value other than 9 an

Hardware Information3-204 AT Commands Reference Manual August 5, 2008+GCAP, Request Overall Capabilities This command indicates the major capability

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-205+MTCTS, CTS Line Test CommandThis command sets the CTS pin of the R

Hardware Information3-206 AT Commands Reference Manual August 5, 2008The following table shows the &K parameters.ExampleAT&K?&K: 3OKAT&am

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-207When AT&C is set to 0, the DCD signal is always ON. When AT&

Hardware Information3-208 AT Commands Reference Manual August 5, 2008&D, Circuit 108 BehaviorThis command determines how the G24 responds when th

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-209+MCWAKE, GPRS CoverageThis command tells the G24 whether to report

Hardware Information3-210 AT Commands Reference Manual August 5, 2008+MGGIND, GSM/GPRS Service IndicatorThis command configures the service indicator

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-211+CFUN, Shut Down Phone FunctionalityThis command shuts down the pho

Trademarks MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the propert

How to Get Warranty Service?xxvi AT Commands Reference Manual August 5, 2008Warranty Term, and must immediately submit the Product for service to Mot

Hardware Information3-212 AT Commands Reference Manual August 5, 2008AT+CFUN?+CFUN: 4Power cycling…AT+CFUN?+CFUN: 4Power cut …AT+CFUN? // Phone tra

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-213The following table shows the +ICF parameters.ExampleAT+ICF?+ICF: 3

Hardware Information3-214 AT Commands Reference Manual August 5, 2008The following table shows the ATS97 parameters. Example// Connect the antennaATS

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-215Operation of this command is flex dependant.The following table sho

Hardware Information3-216 AT Commands Reference Manual August 5, 2008+TWUR, Wakeup Reason RequestThis command is used to query the wakeup reason. Mul

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-217Operation of this command is flex dependent.The following table sho

Hardware Information3-218 AT Commands Reference Manual August 5, 2008Operation of this command is flex dependent.The following table shows the +TADIA

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-219In case that second UART is open for full functionality, the call c

Hardware Information3-220 AT Commands Reference Manual August 5, 2008ExampleAT+MPSU? +MPSU: 0OKAT+MPSU=?+MPSU: (0-2)OKAT+MPSU=2OK/* reset and after i

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-221The following table shows the +MIOC parameters.Table 3-143: +MIOC P

Preface August 5, 2008 AT Commands Reference Manual xxviiIn some cases, you may be requested to provide additional information concerning the mainten

Hardware Information3-222 AT Commands Reference Manual August 5, 2008ExampleAT+MIOC=?+MIOC: (00000000-11111111),(00000000-11111111)OKLight control ex

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-223Data sending (vector example):Client has a data bus with 8 bits and

Hardware Information3-224 AT Commands Reference Manual August 5, 2008+MIOD, Motorola I/O DefineThis command defines the G24 8 GPIO pins configuration

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-225The following table shows the +MIOD parameters.The following table

Hardware Information3-226 AT Commands Reference Manual August 5, 2008Example+MIOD: (00000000-11111111),(0,1),( 00000000-11111111)AT+MIOD=00010000,0 /

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-227ReadAT+MMAD? List of converters and their monitoring setup values:+

Hardware Information3-228 AT Commands Reference Manual August 5, 2008The following table shows the +MMAD parameters.Unsolicited MessagesAT+MMAD=<C

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-229<Average_calc_duration>1-255 For how long the average calcula

Hardware Information3-230 AT Commands Reference Manual August 5, 2008Table 3-147: A/D Value to Temperature ConversionTemperature(°C)ADValue-decimal(8

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-231Figure 3-2: Temperature Vs. A/D ValueTemperature Conversion Functio

Installed Dataxxviii AT Commands Reference Manual August 5, 20086. Defects or damage due to range, coverage, availability, grade of service, or opera

Hardware Information3-232 AT Commands Reference Manual August 5, 2008// report originated by G24// Converter num=1, report=3, rate=5*100ms, low,high,

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-233+MPCMC, Continuous PCM ClockThis command defines whether the PCM cl

Hardware Information3-234 AT Commands Reference Manual August 5, 2008+MVREF, Motorola Voltage ReferenceThis command defines the Vref regulator's

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-235OKAT+MVREF=2 //The user set STANDBY and the Vref regulator will ent

Audio3-236 AT Commands Reference Manual August 5, 2008AudioScopeThe audio control can be Summarized to the following three issues:• Path: Selection o

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-237Table 3-151 shows the differences between Basic and Advanced audio

Audio3-238 AT Commands Reference Manual August 5, 2008Audio Control of Path, Gain and Algorithms is available by these two different modes' sets

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-239G24 supports both analog and digital audio. Digital audio is suppor

Audio3-240 AT Commands Reference Manual August 5, 2008The following table shows the +CRSL parameters.ExampleAT+CRSL?+CRSL: 7OKAT+CRSL=?+CRSL: (0-7)OK

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-241The following table shows the +CLVL parameters.ExampleAT+CLVL?+CLVL

Preface August 5, 2008 AT Commands Reference Manual xxixRevision HistoryManual Number6889192V28-KManual TitleG24 Developer’s Guide: AT Commands Refer

Audio3-242 AT Commands Reference Manual August 5, 2008ExampleAT+CMUT=?+CMUT:(0-1)OKAT+CMUT?+CMUT: 0 uplink voice is unmutedOKAT+CMUT=1 uplink voice

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-243The following table shows the S94 parameters.ExampleATS94=0 //Disab

Audio3-244 AT Commands Reference Manual August 5, 2008The following table shows the S96 parameters.ExampleATS96=1 //Enable echo cancelingOKATS96=4+CM

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-245The following diagram shows the audio paths:.Figure 3-7: Audio Path

Audio3-246 AT Commands Reference Manual August 5, 2008The following table shows the +MAPATH parameters.ExampleAT+MAPATH=1,2 //Direct=1 (input), accy=

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-247+MAVOL, Volume Setting This command enables you to determine a volu

Audio3-248 AT Commands Reference Manual August 5, 2008The following table shows the +MAVOL parameters.Example//Set volume level 3 for voice through s

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-249+MAMUT, Input Devices Mute This command controls the muting/unmutin

Audio3-250 AT Commands Reference Manual August 5, 2008+MAFEAT, Features SelectionThis command controls the algorithm features: sidetone, echo cancel

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-251General Audio Commands+MADIGITAL, Analog/Digital Audio SwitchingThi

Revision Historyxxx AT Commands Reference Manual August 5, 2008G December 31, 2007Updated with SW version G24_G_0C.11.XXR.Commands added: +MDLC,+MHDP

Audio3-252 AT Commands Reference Manual August 5, 2008+CALM, Alert Sound ModeThis command handles the selection of the G24's alert sound mode. T

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-253+MDMIC, Enable/Disable Microphone Level Setting in Digital Audio Mo

Audio3-254 AT Commands Reference Manual August 5, 2008The following table shows the +MMICG parameters.ExampleAT+MMICG=?+MMICG: (0-31)OKAT+MMICG?+MMIC

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-255The following table shows the +CRTT parameters.ReadAT+CRTT? +CRTT:

Audio3-256 AT Commands Reference Manual August 5, 2008ExampleAT+CRTT=6,0 //Ring type number 6, operation 0 (play)OK //When 6 is in the supported <

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-257+VTD, Tone DurationThis command handles the selection of tone durat

Audio3-258 AT Commands Reference Manual August 5, 2008+VTS, Command-Specific Tone DurationThis command transmits a string of DTMF tones when a voice

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-259AccessAccess Control CommandsWhen the phone or SIM card is locked o

Access3-260 AT Commands Reference Manual August 5, 2008+CPIN, Enter PIN for Unlocking SIM Card or Enter PUK for Unblocking SIM Card This command lock

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-261The following table shows the +CPIN parameters.Command Type Syntax

August 5, 2008 AT Commands Reference Manual 1-1Chapter 1: Product FeaturesConnectivity InterfaceThe user can establish two types of connections in ord

ExampleAT+CPIN=? OKAT+CLCK="SC",1,"<correct PIN>"//Not case-sensitiveOK The facility is enabled by the +CLCK command (Refer

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-263+EPIN, Enter SIM PIN2 to Verify PIN2 IndicatorThis AT command will

Access3-264 AT Commands Reference Manual August 5, 2008+TPIN, Query Number of Remaining SIM PIN/PUK Entering AttemptsThis command returns the number

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-265+CPWD, Change PasswordThis command sets a new password for the faci

Access3-266 AT Commands Reference Manual August 5, 2008ExampleAT+CPWD =? +CPWD: ("SC",8),("AO",8),("OI",8),("OX&qu

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-267The following table shows the +CLCK parameters.Command Type Syntax

Access3-268 AT Commands Reference Manual August 5, 2008ExampleAT+CLCK=?+CLCK: ("SC","AO","OI","OX","AI&q

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-269OK(Voice and data international calls barred, fax and SMS not barre

Access3-270 AT Commands Reference Manual August 5, 2008The following table shows the +EMPC parameters.ExampleAT+EMPC?+EMPC:3,0OKThe status of phone i

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-271AT+EMPC="<wrong pin>",0+EMPC:2,1OKThe phone moves t

CSD Operation1-2 AT Commands Reference Manual August 5, 20082. Upon being interrupted by the RI signal, drop the DTR line to switch to command mode (

Firmware Update Over the Air (FOTA)The following paragraphs describe the use of AT commands for updating the G24 firmware over the air.Note: FOTA is e

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-273The following table shows the +MFOTAWSCFG parameters.ExampleAT+MFOT

Firmware Update Over the Air (FOTA)3-274 AT Commands Reference Manual August 5, 2008OKAT+MFOTAWSCFG?+MFOTAWSCFG:(1-6),(0-65535) // test commandOKAT+

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-275The following table shows the +MFOTACNFG parameters.ExampleAT+MFOTA

Firmware Update Over the Air (FOTA)3-276 AT Commands Reference Manual August 5, 2008If case that the user missed the last request indication, he can

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-277In MUX mode, this AT command is allowed on DLC2 only.The following

Firmware Update Over the Air (FOTA)3-278 AT Commands Reference Manual August 5, 2008In MUX mode, this AT command is allowed on DLC2 only.+MFOTAABORT,

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-279This command is a basic command.In MUX mode, this AT command is all

Firmware Update Over the Air (FOTA)3-280 AT Commands Reference Manual August 5, 2008ExampleAT+MFOTAIND? +MFOTAIND: 0OKAT+MFOTAIND=? +MFOTAIND: (0,1)A

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-281In MUX mode, this AT command is allowed on DLC2 only.Command Type S

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-3Service Provider (ISP) to send email or dialing the corporate Intranet to

Modem Configuration and Profile3-282 AT Commands Reference Manual August 5, 2008Modem Configuration and Profile Modem Register CommandsThe G24 holds

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-283The following table shows the V parameters.ExampleATV?V: 1OKATV00AT

Modem Configuration and Profile3-284 AT Commands Reference Manual August 5, 2008The following table shows the Qn parameters.ExampleATQ0OKATQ?Q: 0OKAT

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-285ExampleATE?001OKX, Result Code Selection and Call Progress Monitori

Modem Configuration and Profile3-286 AT Commands Reference Manual August 5, 2008S, Bit Map RegistersThis command reads/writes values of the S-registe

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-287The following table shows the different S-registers and their assoc

Modem Configuration and Profile3-288 AT Commands Reference Manual August 5, 2008ExampleATS36?005OKATS0=3OKATS0?003OKS2This command handles the select

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-289S12This command handles the selection of the guard time, which is s

Modem Configuration and Profile3-290 AT Commands Reference Manual August 5, 2008?, Return the Value of the Last Updated S-registerThis command displa

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-291ExampleAT&F?&F: 0OKZ, Reset to Default ConfigurationThis co

Improved OEM Features1-4 AT Commands Reference Manual August 5, 2008Set up Idle Mode TextThe proactive SIM mechanism enables the SIM to initiate acti

Modem Configuration and Profile3-292 AT Commands Reference Manual August 5, 2008sleep mode and signals its readiness for sleep. For this purpose, a s

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-293Figure 3-10: Wakeup-In LineTwo modes exist:• Idle Mode: The termina

Modem Configuration and Profile3-294 AT Commands Reference Manual August 5, 2008Two modes exist:• Idle mode: The G24 has no data to send.• Wakeup mod

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-295The following table shows the S24 parameters.ExampleATS24? <ente

Modem Configuration and Profile3-296 AT Commands Reference Manual August 5, 2008The following table shows the S102 parameters.ExampleATS102? <ente

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-297Exampleats100?001OKats100=0OKats100?000OK+MSCTS, Enable/Disable CTS

Modem Configuration and Profile3-298 AT Commands Reference Manual August 5, 2008The following table shows the +MSCTS parameters.ExampleAT+MSCTS = ? +

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-299The following table shows the +CMEE parameters. Command Type Syn

Modem Configuration and Profile3-300 AT Commands Reference Manual August 5, 2008 Table 3-197: +CME Errors<Parameter> Description<err> Nu

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-301Note: +CME ERROR:280, Data lost, is sent to the terminal in extrem

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-5TCP/UDP IP ConnectionOverviewThe network capabilities are achieved by usin

Modem Configuration and Profile3-302 AT Commands Reference Manual August 5, 2008aborted) and Error 280, Data lost is sent to the terminal instead of

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-303 ExampleAT+CMEE=0 //+CME ERROR is not usedOKAT+VTDERRORAT+CMEE=1

Modem Configuration and Profile3-304 AT Commands Reference Manual August 5, 2008AT+VTD+CME ERROR: operation not supported

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-305+CEER, Extended Error ReportThis execution command returns an exten

Modem Configuration and Profile3-306 AT Commands Reference Manual August 5, 2008The following table shows the +CEER parameters.Table 3-200: +CEER Par

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-307ExampleAt+CEER+CEER: "No information available"OK AT+CEER

Modem Configuration and Profile3-308 AT Commands Reference Manual August 5, 2008+MGEER, GPRS Extended Error ReportThis command is used to return the

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-309The following table shows the +MGEER parameters.Table 3-201: +MGEER

Modem Configuration and Profile3-310 AT Commands Reference Manual August 5, 2008ExampleAT+MGEER=2OKAT+MGEER+MGEER: NO INFORMATION AVAILABLEOKAT+MGEER

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-311UI (User Interface)+CRSM, Restricted SIM AccessThis command provide

Improved OEM Features1-6 AT Commands Reference Manual August 5, 20082. The G24 opens a TCP/IP stack as one of its "sockets" (it must know t

UI (User Interface)3-312 AT Commands Reference Manual August 5, 2008The following table shows the +CRSM parameters.Table 3-202: +CRSM Parameters <

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-313<P1>,<P2>,<P3>Integer type. Parameters passed on

UI (User Interface)3-314 AT Commands Reference Manual August 5, 2008<sw1> <sw2> Integer character format. Information, from the SIM, abou

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-315ExampleAT+CRSM=176,28478,0,0,20 //READ BINARY, GID1(6F3E),0 ,0 , 20

UI (User Interface)3-316 AT Commands Reference Manual August 5, 2008OKAT+CRSM=220,28474,1,4,30, 657469FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-317Exampleat&vACTIVE PROFILE:E1 Q0 V1 X4 &C1 &D2 &K3 &

UI (User Interface)3-318 AT Commands Reference Manual August 5, 2008ExampleAT&W0OKAT&W1OKAT&C Set circuit 109 (DCD) behavior 0-2 1 2AT&am

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-319&Y, Default User ProfileThe following table shows the &Y pa

UI (User Interface)3-320 AT Commands Reference Manual August 5, 2008commands like ATH/AT+CHLD and so on.Note: The +CKPD command does not support DTMF

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-321ExampleAT+CMER=0,2,0,0,0OKAT+CKPD=m //Emulate pressing the MENU bu

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-7UDP/IPThe set of AT commands created for the TCP/IP connection is used for

UI (User Interface)3-322 AT Commands Reference Manual August 5, 2008The following table shows the +MKPD parameters.ExampleAT+CMER=0,2,0,0,0AT+MKPD=m,

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-323+CMER, Mobile Equipment Event ReportingThe following table shows th

UI (User Interface)3-324 AT Commands Reference Manual August 5, 2008+CLAN, ME LanguageThis command handles the selection of language in the ME.The &l

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-325ExampleAT+CLAN?+CLAN: "EN"OK AT+CLAN=?+CLAN: "DE&quo

UI (User Interface)3-326 AT Commands Reference Manual August 5, 2008The following table shows the +CIND parameters.ExampleAT+CIND=?+CIND: ("serv

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-327+MHDPB, Motorola Headset Dual-position ButtonThis command is used t

UI (User Interface)3-328 AT Commands Reference Manual August 5, 2008OKatd44345678; OK>Long press on the headset dual-position button:> The call

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-329Unsolicited UI Status MessagesCertain actions performed in the G24

UI (User Interface)3-330 AT Commands Reference Manual August 5, 2008+CDEV, Change Display IndicationWhen text on the display changes and the <disp

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-331+MUPB, Phone Book Event This output is sent by the G24 when a phone

Improved OEM Features1-8 AT Commands Reference Manual August 5, 20085. Server side: – After receiving the first packet from the client, the server kn

GPRS/EDGE3-332 AT Commands Reference Manual August 5, 2008GPRS/EDGEGPRS FunctionalityGSM 07.07 defines commands that a TE may use to control a GPRS M

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-333+CGCLASS, GPRS Mobile Station ClassThis command is used to set the

GPRS/EDGE3-334 AT Commands Reference Manual August 5, 2008+CGDCONT, Define PDP ContextThis command specifies the PDP (Packet Data Protocol) context.C

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-335The following table shows the +CGDCONT parameters.Note: The IP addr

GPRS/EDGE3-336 AT Commands Reference Manual August 5, 2008+CGDCONT: 3,"IP","","0.0.0.0",0,0OKAT+CGDCONT= 1,"IP&quo

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-337The following table shows the +CGQMIN parameters.ReadAT+CGQMIN? +CG

GPRS/EDGE3-338 AT Commands Reference Manual August 5, 2008ExampleAT+CGQMIN=?+CGQMIN: ("IP"),(0-3),(0-4),(0-5),(0-9),(0-18,31)OKAT+CGQMIN? +

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-339The following table shows the +CGQREQ parameters.ExampleAT+CGQREQ=?

GPRS/EDGE3-340 AT Commands Reference Manual August 5, 2008Note: This command has the characteristics of both the V.25ter action and parameter command

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-341D*99, Request GPRS Service "D"This command enables the ME

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-9There are two options for valid closing of a socket, opened in Online Data

GPRS/EDGE3-342 AT Commands Reference Manual August 5, 2008The following table shows the D*99 parameters.ExampleATD*99 //Try connecting to GPRS accord

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-343+CGPRS, GPRS CoverageThis command indicates whether there is GPRS c

GPRS/EDGE3-344 AT Commands Reference Manual August 5, 2008+CGACT, PDP Context Activate or DeactivateThis command activates/deactivates the specified

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-345ExampleAT+CGACT=?+CGACT: (0,1)OKAT+CGACT?+CGACT: 1,0+CGACT: 2,0+CGA

GPRS/EDGE3-346 AT Commands Reference Manual August 5, 2008The following table shows the +CGPADDR parameters.ExampleAT+CGPADDR=? +CGPADDR: (1,2,3)OKAT

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-347Operation of this command is flex dependant.Note: Testing of the lo

GPRS/EDGE3-348 AT Commands Reference Manual August 5, 2008The following table shows the +MIAU parameters.ExampleAT+MIAU?+MIAU: "192.168.1.1"

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-349EDGE CommandsNote: The following commands will be used only with G2

GPRS/EDGE3-350 AT Commands Reference Manual August 5, 2008Read+CGEQREQ? +CGEQREQ: <cid>, <Traffic class> ,<Maximum bitrate UL> ,<

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-351Test+CGEQREQ=? +CGEQREQ: <PDP_type>, (list of supported <T

Improved OEM Features1-10 AT Commands Reference Manual August 5, 2008• Up to four simultaneous protocol connections.• Ability to pass data via the pr

GPRS/EDGE3-352 AT Commands Reference Manual August 5, 2008The following table shows the +CGEQREQ command parameters.Table 3-227:+CGEQREQ Command Para

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-353<Delivery order> Numeric parameter that indicates whether the

GPRS/EDGE3-354 AT Commands Reference Manual August 5, 2008ExampleSet commands:AT+CGEQREQ=1,1,64,64,64,64,1,0,"1E4","1E4",1,0,3 OK

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-355+CGEQMIN, (Minimum acceptable)This command allows the TE to specify

GPRS/EDGE3-356 AT Commands Reference Manual August 5, 2008Read+CGEQMIN? +CGEQMIN: <cid>, <Traffic class> ,<Maximum bitrate UL>, <

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-357Test+CGEQMIN=? +CGEQMIN: <PDP_type>, (list of supported <T

GPRS/EDGE3-358 AT Commands Reference Manual August 5, 2008The following table shows the +CGEQMIN command parameters.Table 3-228:+CGEQMIN Command Para

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-359<Delivery order> Numeric parameter that indicates whether the

GPRS/EDGE3-360 AT Commands Reference Manual August 5, 2008ExampleSet commands:AT+CGEQMIN=1,1,64,64,64,64,1,0,"1E4","1E4",1,0,3 OK

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-361+CGEQNEG - (Negotiated)This command allows the TE to retrieve the n

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-11Manage FTP ConnectionAT+FTPOPEN command is used to open a FTP connection

GPRS/EDGE3-362 AT Commands Reference Manual August 5, 2008The following table shows the +CGEQNEG command parameters.Table 3-229:+CGEQNEG Command Para

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-363<Delivery order> Numeric parameter that indicates whether the

GPRS/EDGE3-364 AT Commands Reference Manual August 5, 2008ExampleAT+CGDCONT=1,"IP","INTERNETG"OKAT+CGACT=1,1OKAT+CGEQNEG=1+CGEQNE

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-365+MCEG, Motorola Control EGPRSThis AT command is used to enable or d

GPRS/EDGE3-366 AT Commands Reference Manual August 5, 2008STKThe SIM Application Toolkit (STK) is a set of applications and related procedures, which

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-367STK MechanismsThe mechanisms defined for the STK (Table 3-231) are

GPRS/EDGE3-368 AT Commands Reference Manual August 5, 2008The following table shows the +MTKR parameters.ExampleAT+MTKR?+MTKR: 2F6FFFFFFF0E1F1F430000

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-369Table 3-234: Profile Structure – Byte 2 (Other)Bit Descriptionb1 Co

GPRS/EDGE3-370 AT Commands Reference Manual August 5, 2008b7 Proactive SIM: PROVIDE LOCAL INFORMATION (MCC, MNC,LAC, Cell ID & IMEI)b8 Proactive

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-371b3 Proactive SIM: PERFORM CARD APDUb4 Proactive SIM: GET READER STA

Improved OEM Features1-12 AT Commands Reference Manual August 5, 2008The G24 operation modes switching is shown in Figure 1-2.Figure 1-2: G24 Operati

GPRS/EDGE3-372 AT Commands Reference Manual August 5, 2008b7 Proactive SIM: LAUNCH BROWSERb8 RFU, bit = 0Table 3-242: Profile Structure – Byte 10 (So

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-373Table 3-244: Profile Structure – Byte 12 (Bearer independent protoc

GPRS/EDGE3-374 AT Commands Reference Manual August 5, 2008b6 RFU, bit = 0b7b8 Screen Sizing Parameters supported as defined in 3GPP TS 11.14 version

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-375Table 3-249: Profile Structure – Byte 17 (Bearer independent protoc

GPRS/EDGE3-376 AT Commands Reference Manual August 5, 2008Note: The bits comprising each subsequent byte are all: RFU, bit = 0.+MTKE, Motorola ToolKi

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-377ExampleAT+MTKE=? //Test command SIM ToolKit set facilities+MTKE: (

GPRS/EDGE3-378 AT Commands Reference Manual August 5, 2008The following table shows the+MTKP Field Descriptions.Note: The Cmd Type numbers refer to t

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-379The following table shows the +MTKP parameters.Table 3-254: +MTKP P

GPRS/EDGE3-380 AT Commands Reference Manual August 5, 2008Values when ProactiveCmdType=9 (Send SMS)<Text> Text information in ASCII format.Valu

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-381Command Type Syntax Response/Action RemarksSetAT+MTKP=<CmdType&g

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-13• When a data byte has the same code as EOF character, a two byte sequenc

GPRS/EDGE3-382 AT Commands Reference Manual August 5, 2008The following table shows the +MTKP Set parameters.Note: If the SIM asks for yes/no answer

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-383Send DTMFThis proactive SIM service command requests the G24 to sen

GPRS/EDGE3-384 AT Commands Reference Manual August 5, 2008The diagram below demonstrates the communication between the SIM, the G24 and the TE regard

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-385The following table shows the +MTKP parameters for response code 26

GPRS/EDGE3-386 AT Commands Reference Manual August 5, 2008Call Disconnected Event Performed by G24; no indication sent to the TE.Location Status Even

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-387The following table shows the Set Event List parameters.Note: Each

GPRS/EDGE3-388 AT Commands Reference Manual August 5, 2008Language CodesThe following table lists an example of the codes for each language supported

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-389fj Fijifo Faroesefr Frenchfy Frisianga Irishgd Scotsgl Galiciangn G

GPRS/EDGE3-390 AT Commands Reference Manual August 5, 2008la Latinln Lingalalo Laothianlt Lithuanianlv Latvian,mg Malagasymi Maorimk Macedonianml Mal

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-391sd Sindhisg Sanghosh Serbo-Croatiansi Sinhalesesk Slovaksl Slovenia

Improved OEM Features1-14 AT Commands Reference Manual August 5, 2008"read" state still indicate actually used / unused sockets include soc

GPRS/EDGE3-392 AT Commands Reference Manual August 5, 2008+MTKM, Motorola ToolKit MenuThe following table shows the +MTKM parameters.vi Vietnamesevo

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-393+MTKM, Motorola ToolKit Menu (Response)The following table shows th

GPRS/EDGE3-394 AT Commands Reference Manual August 5, 2008AT+MTKM=1,1 //Select Item 1.OK+MTKP: 3,1,0,3,8,0,Enter Country name://User is requested to

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-395TCP/IP+MIPCALL, Create a Wireless LinkThis command sets up a PPP (P

GPRS/EDGE3-396 AT Commands Reference Manual August 5, 2008The following table shows the +MIPCALL parameters.Note: The "User name" and the &

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-397+MIPOPEN, Open a Socket (UDP or TCP)This command causes the G24 mod

GPRS/EDGE3-398 AT Commands Reference Manual August 5, 2008The following table shows the +MIPOPEN parameters.Note: Motorola does not recommend using p

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-399+MIPOPEN: 2,1// Listen socket over TCP:AT+MIPOPEN=1,1100,"0.0.

GPRS/EDGE3-400 AT Commands Reference Manual August 5, 2008SSL connection is not supported for listening sockets.Command Type Syntax Response/Action R

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-401The following table shows the +MIPODM parameters.Note: Motorola doe

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-15Echo SuppressionEcho suppression suppresses a large amount of the output

GPRS/EDGE3-402 AT Commands Reference Manual August 5, 2008Listen socket over TCP:AT+MIPODM=1,1100,"0.0.0.0",0,0 // Listens to any port at a

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-403The following table shows the +MIPCLOSE parameters.ExampleAT+MIPCLO

GPRS/EDGE3-404 AT Commands Reference Manual August 5, 2008+MIPSETS, Set Size and Timeout for Automatic PushThis command causes the G24 to set a water

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-405ExampleAT+MIPSETS=1,340 //Asks the G24 to accumulate 340 bytes on s

GPRS/EDGE3-406 AT Commands Reference Manual August 5, 2008Motorola recommends that the terminal sets the watermark in the accumulating buffer prior t

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-407+MIPPUSH, Push Data into Protocol StackThis command causes the G24

GPRS/EDGE3-408 AT Commands Reference Manual August 5, 2008+MIPFLUSH, Flush Data from BuffersThis command causes the G24 to flush (delete) data accumu

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-409ExampleAT+MIPFLUSH=2 //Socket number 2 was previously opened using

GPRS/EDGE3-410 AT Commands Reference Manual August 5, 2008The following table shows the +MIPRTCP parameters.Example+MIPRTCP: 3,0,7171+MIPSTAT, Status

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-411+MIPDATA, Network Incoming Data Unsolicited Indication in Pseudo-co

August 5, 2008 AT Commands Reference Manual iManual Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MUX Integration1-16 AT Commands Reference Manual August 5, 2008MUX IntegrationOverviewThe G24 is supplied with an internal GSM 7.10 protocol stack, a

GPRS/EDGE3-412 AT Commands Reference Manual August 5, 2008MIPXON, Flow Control - XonThis command is the unsolicited event that the G24 sends to the t

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-413MIPCONF - Configure Internal TCP/IP stackThis command allows to con

GPRS/EDGE3-414 AT Commands Reference Manual August 5, 2008ExampleAT+MIPCONF=2,5,10,600,75,2,60,10,5OKAT+MIPOPEN=2,0,"66.249.87.99",80,0OK+M

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-415+MIPSTAT: 2,0,30+MIPXON: 2+MIPSTAT: 2,0,40+MIPRTCP: 2,530,485454502

GPRS/EDGE3-416 AT Commands Reference Manual August 5, 2008Only one ping request execution will be allowed at any given moment.Command Type Syntax Res

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-417The following table shows the +MPING command parameters.Table 3-276

GPRS/EDGE3-418 AT Commands Reference Manual August 5, 2008The following table shows the +MPING unsolicited response parameters.Notes:1. Ping request

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-419ExampleAT+MIPCALL=1,"internet"OK+MIPCALL: 10.170.4.111AT+

GPRS/EDGE3-420 AT Commands Reference Manual August 5, 2008The following table shows the +MPINGSTAT unsolicited response parameters.Table 3-278:+MPING

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-421ExampleAT+MIPCALL=1,"internet"OK+MIPCALL: 10.170.4.111//P

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-17• Receive Incoming SMS indication• Inquiry GSM coverage indication• Setup

GPRS/EDGE3-422 AT Commands Reference Manual August 5, 2008+MSDNS, Set DNS IP AddressThis command set/read DNS (Domain Name Server) IP address (primar

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-423ExampleAT+MSDNS=?+MSDNS: (1-5),(<IP>),(<IP>)OKAT+MSDNS?

GPRS/EDGE3-424 AT Commands Reference Manual August 5, 2008OKAT+MSDNS?+MSDNS: 1,"192.118.9.177","192.118.11.77"+MSDNS: 2,"192

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-425The following table shows the +MIPCSC parameters.Notes:This command

GPRS/EDGE3-426 AT Commands Reference Manual August 5, 2008ExampleAT+MIPCSC=?+MIPCSC: (1-4),(0-2047):OKAT+MIPCSC?+MIPCSC: 1,0+MIPCSC: 2,0+MIPCSC: 3,0+

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-427+MIPCFF, Control Filtering Feature for Incoming TCP ConnectionThis

GPRS/EDGE3-428 AT Commands Reference Manual August 5, 2008The following table shows the +MIPCFF parameters.Table 3-281: +MIPCFF Parameters <Parame

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-429ExampleAT+MIPCFF=?+MIPCFF: (1-4),(0-4),( "<IP CIDR>"

GPRS/EDGE3-430 AT Commands Reference Manual August 5, 2008The following table shows the +MIPSSL parameters.The following table shows the +MIPSSL Aler

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-431Example+MIPSSL: 2,15 // While opening the SSL connection for socket

Short Message Service (SMS)1-18 AT Commands Reference Manual August 5, 2008Short Message Service (SMS)OverviewThe SMS feature provides means for SMS

FTP (File Transfer Protocol)3-432 AT Commands Reference Manual August 5, 2008FTP (File Transfer Protocol)Session Commands+FTPOPEN, Open FTP Connectio

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-433The following table shows the +FTPOPEN parameters.Notes:1 Mandatory

FTP (File Transfer Protocol)3-434 AT Commands Reference Manual August 5, 2008ExampleThe first example illustrates FTP connection open success case.AT

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-435AT+CMEE=2OKAT+FTPCLOSE+CME ERROR: FTP session is inactive+FTPINFO,

FTP (File Transfer Protocol)3-436 AT Commands Reference Manual August 5, 2008ExampleThe example illustrates FTP connection open success case, when FT

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-437The following table shows the +FTPCWD parameters.ExampleThe first e

FTP (File Transfer Protocol)3-438 AT Commands Reference Manual August 5, 2008+FTPMKD, Make DirectoryThis command causes the G24 to request the remote

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-439+FTPRMD, Remove DirectoryThis command causes the G24 to request the

FTP (File Transfer Protocol)3-440 AT Commands Reference Manual August 5, 2008+FTPINFO: 550 1: No such file or directory.+FTPRMD: 0+FTPPWD, Print Work

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-441+FTPCDUP, Change Directory UpThis command causes the G24 to request

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-19Technical DescriptionThe G24 memory for incoming short messages is SIM-de

FTP (File Transfer Protocol)3-442 AT Commands Reference Manual August 5, 2008The following table shows the +FTPDEL parameters.ExampleThe example illu

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-443The following table shows the +FTPREN parameters.ExampleThe first e

FTP (File Transfer Protocol)3-444 AT Commands Reference Manual August 5, 2008+FTPLIST, Request ListThis command causes the G24 to request the remote

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-445+FTPLIST: 1The second example illustrates get list for all files su

FTP (File Transfer Protocol)3-446 AT Commands Reference Manual August 5, 2008The following table shows the +FTPSTAT parameters.ExampleWhen the user e

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-447The fourth example illustrates using +FTPSTAT command with a parame

FTP (File Transfer Protocol)3-448 AT Commands Reference Manual August 5, 2008ExampleThe example illustrates the command execution.AT+FTPSYSTOK+FTPSYS

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-449+FTPSTOR, Store File On Remote FTP ServerThis command causes the G2

FTP (File Transfer Protocol)3-450 AT Commands Reference Manual August 5, 2008ExampleThe example illustrates the command execution. Requested file typ

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-451The following table shows the +FTPRETR parameters.ExampleThe exampl

Email Message Services1-20 AT Commands Reference Manual August 5, 2008Email Message ServicesOverviewThe Email feature is intended for Email messages

NOP - Compatible3-452 AT Commands Reference Manual August 5, 2008NOP - CompatibleIGNORED (Compatible Only) CommandsThe following commands return OK,

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-453Fax Class 1Facsimile machines were developed for sending digitized

Fax Class 13-454 AT Commands Reference Manual August 5, 2008Fax Commands+FCLASS, Select ModeThe G24 facsimile service maintains a parameter for ident

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-455+FTS, Transmit SilenceThis command causes the G24 to stop any trans

Fax Class 13-456 AT Commands Reference Manual August 5, 2008The following table shows the +FRS parameters.ExampleAt+fclass=1OKAtd035658584CONNECT 960

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-457The following table shows the command modulation select codes.Examp

Fax Class 13-458 AT Commands Reference Manual August 5, 2008+FRM, Receive DataThis command causes the G24 to receive data from the remote party using

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-459After the entering active session mode (G24 sent CONNECT to the ter

Fax Class 13-460 AT Commands Reference Manual August 5, 2008+FRH, Receive DATA with HDLC FrameThis command causes the G24 to receive HDLC framed data

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-461The implementation of this parameter is mandatory if V.42 error con

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-21FaxOverviewA Service Class 1 facsimile G24 provides a basic level of serv

Fax Class 13-462 AT Commands Reference Manual August 5, 2008+FPR, Fax Serial Port RateThis command sets the request baud rate. +FPR command is implem

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-463ExampleExample - AT+FCLASS=1 OKAT+FPR=8OKAT+FPR? +FPR: 8OKAT+IPR=3

RS232 Multiplexer Feature3-464 AT Commands Reference Manual August 5, 2008RS232 Multiplexer FeatureThe MUX provides multiple logical communication ch

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-465Product ArchitectureThe following figure shows the former architect

RS232 Multiplexer Feature3-466 AT Commands Reference Manual August 5, 2008Figure 3-20: MUX StatesPREMUX StateOnce the GRLC logical communication chan

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-467UART Flow ControlThe following sections describe UART flow control

RS232 Multiplexer Feature3-468 AT Commands Reference Manual August 5, 2008MUX UART Port SpeedAuto baud rate detection is disabled in the MUX. To set

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-469The following table shows the +CMUX parameters.Note: Due to non-ERM

RS232 Multiplexer Feature3-470 AT Commands Reference Manual August 5, 2008MUX Customer Open Source Code PacketThe MUX is provided with an open source

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-471Multiple Channel Configuration The configurations listed below are

Character Sets1-22 AT Commands Reference Manual August 5, 2008Character SetsThe following includes the references to various tables that provide conv

RS232 Multiplexer Feature3-472 AT Commands Reference Manual August 5, 2008DLC1 Explanation:An external host interface is used as a regular G24 RS232

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-473Table 3-304: AT Commands Limitations for 4-Channel ConfigurationIDL

RS232 Multiplexer Feature3-474 AT Commands Reference Manual August 5, 2008+CBAND V Ignored+CBAUD V MUX degeneratedYes+CBC V Yes+CBST V csd V csd Yes

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-475+CIMI V Yes+CIND V Yes PCHS - unsolicited+CKEV V Yes PCHS - unsolic

RS232 Multiplexer Feature3-476 AT Commands Reference Manual August 5, 2008+CNMI V Yes Unsolicited - special+CNUM V Yes+COLP V Yes PCHS - unsolicited+

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-477+CSSN V Yes PCHS - unsolicited+CSVM V Yes+CTFR1VVVV+CUSD V Yes+EPIN

RS232 Multiplexer Feature3-478 AT Commands Reference Manual August 5, 2008+MALMH V Yes+MAMUT V Yes+MAVOL V Yes+MCEGVVVV Yes+MCELLVVVV Yes+MCSAT V+MCS

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-479+MEMWVVVV Yes+MFOTAABORTVYes+MFOTABSVYes+MFOTACNFGVYes+MFOTAINDVYes

RS232 Multiplexer Feature3-480 AT Commands Reference Manual August 5, 2008+MIPOPENVYes+MIPPUSHVYes+MIPSENDVYes+MIPSETSVYes+MJDC V Yes+MKPD V Yes PCHS

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-481+MTTYVVVV YesUnsolicited-special+MUPB V Yes PCHS - unsolicited+MVCV

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-23Unlike some legacy encoding, UTF-8 is easy to parse. So-called lead and t

RS232 Multiplexer Feature3-482 AT Commands Reference Manual August 5, 2008DLVVVVRefer to the D definitions at the end of the table.YesEVVVV YesPCHSFV

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-483+CGATT V gprs V V Yes+CGQREQV gprs V Yes+CRC V V V Yes PCHS+CRING V

RS232 Multiplexer Feature3-484 AT Commands Reference Manual August 5, 2008Multiple Channel DefinitionsThe following table provides various multiple c

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-485• The two requirements above have an exception regarding the UART c

RS232 Multiplexer Feature3-486 AT Commands Reference Manual August 5, 2008

August 5, 2008 AT Commands Reference Manual 4-1Chapter 4: Using the CommandsSetting Up the G24 (Power On and Initial Actions)There are three phases of

Setting Up the G24 (Power On and Initial Actions)4-2 AT Commands Reference Manual August 5, 2008Figure 4-2: Detailed Phone State TransactionsReadyGPR

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-3Recommended G24 Initialization after PowerupFigure 4-3 provides a recomm

Recommended G24 Initialization after Powerup4-4 AT Commands Reference Manual August 5, 2008RS232 Lines SetupThere is no dynamic detection. Upon power

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-5Test G24 CommunicationThis is a preliminary step. During this step, the

AT Commands Summary1-24 AT Commands Reference Manual August 5, 2008AT Commands SummaryThe following list contains a summary of all the G24 AT command

Recommended G24 Initialization after Powerup4-6 AT Commands Reference Manual August 5, 20081. Baud setting example:AT+CBAUD=6//Setting baud rate for

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-7SIM Card StatusTo enable the module to transfer from basic commands to f

Recommended G24 Initialization after Powerup4-8 AT Commands Reference Manual August 5, 2008G24 Network ConnectionIn this step, the G24 detects existi

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-9Terminal SynchronizationIn this step, the terminal requests the stored p

SMS4-10 AT Commands Reference Manual August 5, 2008SMSManaging Stored Messages in the G24 MemoryAT+CPMS="me" //Select NVM as preferred mem

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-11Setting the Notification Indication for Incoming Messages (Using AT+CNM

SMS4-12 AT Commands Reference Manual August 5, 2008Writing, Saving and Sending Messages (Using AT+CMGW and AT+CMSS)Writing messages into the database

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-13Sending Messages (Using AT+CMGS)Sends an SM from the G24 to the network

Call Control4-14 AT Commands Reference Manual August 5, 2008Call ControlThe following figure is a detailed view of the states the G24 goes through fo

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-15atd035659260,345,22; //VOICE call with tones sent after connectingOKOK

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-25H This command hangs up, or terminates a particular call. Page 3-17A This

Call Control4-16 AT Commands Reference Manual August 5, 2008Dialing the Last Number Exampleatd035658278;OKOKathNO CARRIEROKatdl //Last called number

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-17Conference Callatd051632601; //Dialing the first member of the confere

Data Call4-18 AT Commands Reference Manual August 5, 2008Data CallSwitching Modes (Data Mode/Command Mode)atd054565190 //Calling the remote modemOKa

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-19GPRSWhen using the GPRS, it is recommended to implement a "keep al

GPRS4-20 AT Commands Reference Manual August 5, 2008Using the ATD* Command SetRequest GPRS service 'D':ATD*99***(CID)#The CID (Context ID)

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-21Changing the Character SetExampleWhen an SMS messages with the followin

Sleep Mode4-22 AT Commands Reference Manual August 5, 2008Sleep ModeNote: The notation of TXD and RXD are from the perspective of the terminal unless

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-23STKDisplay Text/Display Idle Mode TextThe SIM card requests to send tex

STK4-24 AT Commands Reference Manual August 5, 2008Get InputThe SIM card requests to display text on the terminal, and waits for a response from the

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-25Set Up MenuThe terminal requests the STK menu. As a result, the SIM sen

Table of Contentsii AT Commands Reference Manual August 5, 2008TCP/UDP IP Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AT Commands Summary1-26 AT Commands Reference Manual August 5, 2008+MVCThis AT command is used to choose and configure the priority order of the supp

STK4-26 AT Commands Reference Manual August 5, 2008Set Up CallThe SIM initiates a call, and its data is displayed on the terminal.Figure 4-19: Set Up

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-27+MTKM: 2,2,"IN THE COUNTRY",0AT+MTKM=1,1 //Select Item 1.OK+M

STK4-28 AT Commands Reference Manual August 5, 2008Setup Event ListThe terminal updates the G24 on any of the events. The G24 passes events from the

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-29TCP/IPTCP Data Transfer ExampleAT+MIPCALL=1,"orange","te

TCP/IP4-30 AT Commands Reference Manual August 5, 2008// send a data from terminal to G24 via RS232 communication port:GPRS is the new packet-oriente

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-31+MIPOPEN: 1,1AT+MIPOPEN=2,1111,"172.17.238.44",1111,0OK+MIPOP

TCP/IP4-32 AT Commands Reference Manual August 5, 2008+MIPSEND=1,A344343ABC343438980BC...AB4//Terminal disregards the Xoff request of G24 and keeps s

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-33AudioScenarios for Setting Up Handset Mode or Handsfree ModeHandset Mod

Firmware Update Over the Air (FOTA)4-34 AT Commands Reference Manual August 5, 2008Firmware Update Over the Air (FOTA)FOTA Command for Non-Automatic

Chapter 4: Using the Commands August 5, 2008 AT Commands Reference Manual 4-35+MFOTAREQ: 3 // Install package requestAT+MFOTARSP=0 // Confirm the ins

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-27+CPBF This command searches the currently active phone book for a particu

Firmware Update Over the Air (FOTA)4-36 AT Commands Reference Manual August 5, 2008

August 5, 2008 AT Commands Reference Manual 5-1Chapter 5: ToolsTools OverviewThis chapter describes the PC Driver and PC Loader tools provided by the

PC Driver5-2 AT Commands Reference Manual August 5, 2008Using WinFAXTo configure the modem in WinFAX, follow the procedure below:1. Run WinFAX.2. Sel

August 5, 2008 AT Commands Reference Manual A-1Appendix A: Reference TablesThis appendix contains the following sections:• AT Commands Alphabetical Su

AT Commands Alphabetical SummaryA-2 AT Commands Reference Manual August 5, 2008&GThis command is supported for backward compatibility only, and h

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-3\GThis command sets the use of the software control.Page 3-288\JThis comma

AT Commands Alphabetical SummaryA-4 AT Commands Reference Manual August 5, 2008+CCFCThis command enables control of the call-forwarding supplementary

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-5+CGEQREQ This command allows the TE to specify a EDGE Quality of Service P

AT Commands Alphabetical SummaryA-6 AT Commands Reference Manual August 5, 2008+CIMIThis command requests the International Mobile Subscriber Identit

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-7+CMER This command enables an external accessory to receive key press info

AT Commands Summary1-28 AT Commands Reference Manual August 5, 2008+CMGL This command displays a list of SMS messages stored in the G24 memory.Page 3

AT Commands Alphabetical SummaryA-8 AT Commands Reference Manual August 5, 2008+COLP This command refers to the GSM supplementary service COLP, Conne

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-9+CPUCThis command sets the parameters of the Advice of Charge-related pric

AT Commands Alphabetical SummaryA-10 AT Commands Reference Manual August 5, 2008+CSMSThis command handles the selection of the SMS service type.Page

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-11+FITThis command is supported for backward compatibility only, and has no

AT Commands Alphabetical SummaryA-12 AT Commands Reference Manual August 5, 2008+FTPLISTThis command causes the G24 to request the remote FTP server

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-13+GMIThis command requests manufacturer identification. Page 3-1+GMMThis c

AT Commands Alphabetical SummaryA-14 AT Commands Reference Manual August 5, 2008+MCEGThis command disables / enables EDGE support in G24 modules with

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-15+MDSIThis command enables unsolicited reporting of indications of SIM dea

AT Commands Alphabetical SummaryA-16 AT Commands Reference Manual August 5, 2008+MFOTARSPThis command is used to send response to +MFOTAREQ reports.P

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-17+MIPCLOSEThis command causes the G24 module to free the socket accumulati

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-29+MEGA This command updates the Email Gateway Address.Page 3-167NetworkNet

AT Commands Alphabetical SummaryA-18 AT Commands Reference Manual August 5, 2008+MIPSENDThis command causes the G24 to transmit the data that the ter

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-19+MNTFYThis command enables/disables unsolicited report of NOTIFY indicati

AT Commands Alphabetical SummaryA-20 AT Commands Reference Manual August 5, 2008+MTDTRThis command checks and outputs the physical current status of

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-21+TSMSRETThis command controls the SMS sending retry.Page 3-143+TWUR This

AT Commands Alphabetical SummaryA-22 AT Commands Reference Manual August 5, 2008I This command requests various G24 information items. Page 3-6LThis

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-23AT Commands Behaviour When UART 2 Has Full FunctionalityThe following tab

AT Commands Behaviour When UART 2 Has Full FunctionalityA-24 AT Commands Reference Manual August 5, 2008&PBackward compatible&QBackward compa

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-25+CFSNDisplay only+CFUNX+CGACTOn UART 1 only+CGATT Network dependant+CGCLA

AT Commands Behaviour When UART 2 Has Full FunctionalityA-26 AT Commands Reference Manual August 5, 2008+CLIRFull phone influence+CLVLFull phone infl

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-27+CPWDFull phone influence+CRX+CRC X+CREGX+CRINGX+CRLPFull phone influence

AT Commands Summary1-30 AT Commands Reference Manual August 5, 2008&C This command determines how the state of the DCD line relates to the detect

AT Commands Behaviour When UART 2 Has Full FunctionalityA-28 AT Commands Reference Manual August 5, 2008+FMMX+FMRX+FRHX+FRMX+FRSX+FTHX+FTMX+FTSX+GCAP

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-29+MDBRX+MDBWX+MDBWEX+MDCX+MDSIX+MEDTX X Full phone influence+MEGAFull phon

AT Commands Behaviour When UART 2 Has Full FunctionalityA-30 AT Commands Reference Manual August 5, 2008+MIODFull phone influence+MIPCALL On UART 1 o

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-31+MPINGSTATOn UART 1 only+MPSU+MRICSOn UART 1 only+MRSTFull phone influenc

AT Commands Behaviour When UART 2 Has Full FunctionalityA-32 AT Commands Reference Manual August 5, 2008DFull phone influenceD*99On UART 1 onlyD>F

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-33Character Set Table CS1: (GSM -> UCS-2)The following table shows the c

Character Set Table CS1: (GSM -> UCS-2)A-34 AT Commands Reference Manual August 5, 20080x1D0x00E6 ß0x1E0x03B2 É0x1F0x00C9 SP0x200x0020 !0x210x0021

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-350x3E0x003E ?0x3F0x003F ¡0x400x00A1 A0x410x0041 B0x420x0042 C0x430x0043 D0

Character Set Table CS1: (GSM -> UCS-2)A-36 AT Commands Reference Manual August 5, 20080x5F0x00A7 ¿0x600x00BF a0x610x0061 b0x620x0062 c0x630x0063

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-37Character Set Table CS2: (ASCII <-> UTF-8)The following table shows

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-31+VTS This command transmits a string of DTMF tones when a voice call is a

Character Set Table CS7: (ASCII table)A-38 AT Commands Reference Manual August 5, 2008005 005 005 00000101 ENQ (Enquiry)006 006 006 00000110 ACK (Ack

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-39030 036 01E 00011110 RS (Request to Send)(Record Separator)031 037 01F 00

Character Set Table CS7: (ASCII table)A-40 AT Commands Reference Manual August 5, 2008061 075 03D 00111101 = (equal sign)062 076 03E 00111110 > (g

Appendix A: Reference Tables August 5, 2008 AT Commands Reference Manual A-41093 135 05D 01011101 ] (right/closing bracket)094 136 05E 01011110 ^ (car

Character Set Table CS7: (ASCII table)A-42 AT Commands Reference Manual August 5, 2008125 175 07D 01111101 } (right/closing brace)126 176 07E 0111111

August 5, 2008 AT Commands Reference Manual B-1Appendix B: MUXThis appendix contains the following sections:• PREMUX State, below• Mux-Init State, bel

MUX StateB-2 AT Commands Reference Manual August 5, 2008MUX StateEntry to state:• When the G24 receives the SABM0 frame.Exit from state: • When the

Appendix B: MUX August 5, 2008 AT Commands Reference Manual B-3MUX UART Port Speed Auto baud rate detection is disabled in the MUX. To set the UART ba

Software Procedures Related to RS232 HW LinesB-4 AT Commands Reference Manual August 5, 2008Advanced Mode MUX Software Flow Control Per ChannelThe MU

Appendix B: MUX August 5, 2008 AT Commands Reference Manual B-5Advance Mode Frame PackingThe transmitter (referring to the sender of a frame) examines

AT Commands Summary1-32 AT Commands Reference Manual August 5, 2008+CPWD This command sets a new password for the facility lock. Page 3-264+CLCK This

Software Procedures Related to RS232 HW LinesB-6 AT Commands Reference Manual August 5, 2008UIH FramesUnnumbered information (UIH) frames contain onl

Appendix B: MUX August 5, 2008 AT Commands Reference Manual B-7A change in the status of the first group of signals can be made only by the G24. A cha

Software Procedures Related to RS232 HW LinesB-8 AT Commands Reference Manual August 5, 2008The following figure illustrates a MUX user packet, which

Appendix B: MUX August 5, 2008 AT Commands Reference Manual B-9Open ServiceThe API Open Service MIP and MUI procedures are as follows:• MIP: Use API T

Software Procedures Related to RS232 HW LinesB-10 AT Commands Reference Manual August 5, 2008MUX Service TestIncludes MSC, FC, and so on (all to cont

August 5, 2008 AT Commands Reference Manual Acr & Abbr-1Acronyms and Abbreviations Abbreviation Full NameA ACCHAT Command Channel - Used for AT-co

Acr & Abbr-2 AT Commands Reference Manual August 5, 2008D DADestination AddressD DCDData Carrier DetectD DCEData Communication Equipment (G24)D D

Acronyms and Abbreviations August 5, 2008 AT Commands Reference Manual Acr & Abbr-3H HCOHearing Carry Over allows Speech Disabled callers who can

Acr & Abbr-4 AT Commands Reference Manual August 5, 2008I ICIntegrated CircuitI IDIdentificationI IDLCInformation DLC - refers to all the data ch

Acronyms and Abbreviations August 5, 2008 AT Commands Reference Manual Acr & Abbr-5Q QoSQuality of ServiceQRARecipient AddressQRIRing IndicatorQR

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-33&F This command restores the factory default configuration profile.

Acr & Abbr-6 AT Commands Reference Manual August 5, 2008T TBDTo Be DefinedTTDMATime Division Multiple AccessTTETerminal EquipmentTTLSTransport La

August 5, 2008 AT Commands Reference Manual Index-1IndexNumerics8859 Character Set Management, 1-23AAbbreviationsGeneral System, 2-2Aborting Commands

Index A - A Index-2 AT Commands Reference Manual August 5, 2008+CMGW, Write Message to Memory, 3-127+CMSS, Send Message From Storage, 3-125+CMTI, Un

B - C IndexAugust 5, 2008 AT Commands Reference Manual Index-3+TPIN, Query Number of Remaining SIM PIN/PUK En-tering Attempts, 3-263+TSMSRET, Contro

Index D - G Index-4 AT Commands Reference Manual August 5, 2008GSM, 1-22UCS2, 1-22UTF-8, 1-22ChargeAdvice, 3-55Circuit 108 Behavior, 3-207Circuit 10

H - M IndexAugust 5, 2008 AT Commands Reference Manual Index-5Overview, 1-1Request Service "D", 3-340Technical Description (Class B Operat

Index N - S Index-6 AT Commands Reference Manual August 5, 2008Receiving Data Service, B-9Sending Data Service, B-9Service Test, B-10Software Proced

T - W IndexAugust 5, 2008 AT Commands Reference Manual Index-7SilenceReceive, 3-454Transmit, 3-454SIM CardUnblocking, 3-259Unlocking, 3-259Sleep Mod

AT Commands Summary1-34 AT Commands Reference Manual August 5, 2008+MHDPB This command is used to enable and disable the SEND/END functionality of th

@6889192V28@6889192V28-KMOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names ar

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-35+CGEQMIN This command allows the TE to specify a minimum acceptable profi

Table of ContentsAugust 5, 2008 AT Commands Reference Manual iiiS-parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AT Commands Summary1-36 AT Commands Reference Manual August 5, 2008+MIPDATAThis unsolicited event is sent to the terminal indicating a data comes fro

Chapter 1: Product Features August 5, 2008 AT Commands Reference Manual 1-37+FTPRENThis command causes the G24 to request the remote FTP server to re

AT Commands Summary1-38 AT Commands Reference Manual August 5, 2008F This command is supported for backward compatibility only, and has no effect.Pag

August 5, 2008 AT Commands Reference Manual 2-1Chapter 2: Introduction to AT CommandsAT Commands OverviewAT commands are sets of commands used for com

AT Commands Protocol2-2 AT Commands Reference Manual August 5, 2008General System AbbreviationsThe basic system configuration contains a modem and a

Chapter 2: Introduction to AT Commands August 5, 2008 AT Commands Reference Manual 2-3AT Commands StructureCommand StructureAn AT command line may co

AT Commands Structure2-4 AT Commands Reference Manual August 5, 2008Results Code StructureWhen a command is issued, the G24 responds with a message,

Chapter 2: Introduction to AT Commands August 5, 2008 AT Commands Reference Manual 2-5AT Commands Protocol & Structure ConfigurationThe AT comman

Command Token Types2-6 AT Commands Reference Manual August 5, 2008Command Token TypesBasic Syntax Command FormatThe format of Basic Syntax commands (

Chapter 2: Introduction to AT Commands August 5, 2008 AT Commands Reference Manual 2-7Command Argument Types<value> consists of either a numeri

Table of Contentsiv AT Commands Reference Manual August 5, 2008Call Control AT Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Values2-8 AT Commands Reference Manual August 5, 2008Values Range of ValuesWhen the action accepts a single numeric sub-parameter, or the parameter a

Chapter 2: Introduction to AT Commands August 5, 2008 AT Commands Reference Manual 2-9Core AT CommandsThe G24 responds to a limited commands set when

Core AT Commands2-10 AT Commands Reference Manual August 5, 2008&Y This command displays the default user profile.Page 3-318? This command displa

Chapter 2: Introduction to AT Commands August 5, 2008 AT Commands Reference Manual 2-11+CLCC This command displays a list of all current G24 calls an

Core AT Commands2-12 AT Commands Reference Manual August 5, 2008+FTPCWDThis command causes the G24 to request the remote FTP server to change the wor

Chapter 2: Introduction to AT Commands August 5, 2008 AT Commands Reference Manual 2-13+MADIGITAL This command switches between analog and digital au

Core AT Commands2-14 AT Commands Reference Manual August 5, 2008+MFOTAABORTAborts the DM session.Page 3-277+MFOTABS Init OTA bootstrap definition.Pag

Chapter 2: Introduction to AT Commands August 5, 2008 AT Commands Reference Manual 2-15+MRST This command enables customer software to perform a hard

Core AT Commands2-16 AT Commands Reference Manual August 5, 2008P This command is supported for backward compatibility only, and has no effect.Page 3

August 5, 2008 AT Commands Reference Manual 3-1Chapter 3: AT Commands ReferenceModem IDSubscriber Unit IdentityThese commands allow the user to query

Table of ContentsAugust 5, 2008 AT Commands Reference Manual vDirectory Access Commands - Date Book . . . . . . . . . . . . . . . . . . . . . . . .

Modem ID3-2 AT Commands Reference Manual August 5, 2008+CGMM, +GMM, +FMM, Request Model ID These commands request the model identification. The G24 o

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-3+CGMR, +GMR, +FMR, Request Revision These commands request the revisi

Modem ID3-4 AT Commands Reference Manual August 5, 2008The following table shows the +CGSN, +GSN parameters.ExampleAT+CGSN?+CGSN: "0044000138056

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-5The following table shows the +CSCS parameter optional values.Example

Modem ID3-6 AT Commands Reference Manual August 5, 2008+CIMI, Request IMSI This command displays the International Mobile Subscriber Identity number.

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-7The following table shows the information items that are supported by

Modem ID3-8 AT Commands Reference Manual August 5, 2008Read CommandThe following table shows the +CNUM parameters.ExampleAT+CNUM?+CNUM: "David&q

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-9+CLAC, List of All Available AT CommandsExampleAT+CLAC$%C&C&D

Modem ID3-10 AT Commands Reference Manual August 5, 2008LMNOPQSTVXYZ\A\SOKCapability ReportingThis set of commands enables a user to determine G24’s

Chapter 3: AT Commands Reference August 5, 2008 AT Commands Reference Manual 3-11Call ControlManaging a CSD (Data) CallThe G24 working modes can be d