Motorola AP-7131 - Wireless Access Point Spezifikationen

Stöbern Sie online oder laden Sie Spezifikationen nach Router Motorola AP-7131 - Wireless Access Point herunter. Motorola AP-7131 - Wireless Access Point Specifications Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 706
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
AP-7131 Access Point
Product Reference Guide
Seitenansicht 0
1 2 3 4 5 6 ... 705 706

Inhaltsverzeichnis

Seite 1 - Product Reference Guide

AP-7131 Access Point Product Reference Guide

Seite 2

AP-7131 Access Point Product Reference GuidexDisplaying Rogue AP Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-60Using

Seite 3 - Product Reference Guide

AP-7131 Access Point Product Reference Guide4-182. Copy the content of the CA Certificate message (using a text editor such as notepad) and click on P

Seite 4

System Configuration4-19To create a self certificate:1. Select System Configuration -> Certificate Mgmt -> Self Certificates from the access poi

Seite 5 - Contents

AP-7131 Access Point Product Reference Guide4-204. When the form is completed, click the Generate button.The Certificate Request screen disappears and

Seite 6

System Configuration4-21The generated certificate request displays in Self Certificates screen text box.6. Click the Copy to Clipboard button.The cont

Seite 7 - Chapter 3. Getting Started

AP-7131 Access Point Product Reference Guide4-228. To use the certificate for a VPN tunnel, first define a tunnel and select the IKE settings to use e

Seite 8 - Chapter 5. Network Management

System Configuration4-23Subject (required) The required Subject value contains important information about the certificate. Contact the CA signing the

Seite 9

AP-7131 Access Point Product Reference Guide4-244. Complete as many of the optional values within the Certificate Request screen as possible.5. When t

Seite 10 - Chapter 8. CLI Reference

System Configuration4-2515. Load the certificates on the access point.16. Open the certificate file and copy its contents into the CA Certificates scr

Seite 11

AP-7131 Access Point Product Reference Guide4-26Use the table below to locate the MIB where the given feature can be configured.Feature MIB Feature M

Seite 12 - Chapter 10. Adaptive AP

System Configuration4-27SNMP allows a network administrator to manage network performance, find and solve network problems, and plan for network growt

Seite 13 - Appendix B. Usage Scenarios

xiNetwork LAN, DHCP Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-28Network Type Filter Commands. . . . . . . . . . . . . .

Seite 14 - Appendix C. Customer Support

AP-7131 Access Point Product Reference Guide4-28SNMP v1/v2c community definitions allow read-only or read/write access to access point management info

Seite 15 - About This Guide

System Configuration4-293. Configure the SNMP v3 User Definitions field (if SNMP v3 is used) to add and configure SNMP v3 user definitions.SNMP v3 use

Seite 16 - Service Information

AP-7131 Access Point Product Reference Guide4-304. Specify the users who can read and optionally modify the SNMP-capable client.5. If configuring SNMP

Seite 17 - Introduction

System Configuration4-317. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the settings displayed on the SNMP Access

Seite 18 - 1.1 Feature Overview

AP-7131 Access Point Product Reference Guide4-324.6.1 Configuring SNMP Access ControlUse the SNMP Access Control screen (as launched from the SNMP Acc

Seite 19 - 1.1.2 WIPS Support

System Configuration4-334.6.2 Enabling SNMP TrapsSNMP provides the ability to send traps to notify the administrator that trap conditions are met. Tra

Seite 20 - 1.1.4 Mesh Roaming Client

AP-7131 Access Point Product Reference Guide4-341. Select System Configuration - > SNMP Access - > SNMP Trap Configuration from the access point

Seite 21

System Configuration4-353. Configure the SNMP v3 Trap Configuration field (if SNMP v3 Traps are used) to modify the following:4. Click Apply to save a

Seite 22

AP-7131 Access Point Product Reference Guide4-365. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the settings displ

Seite 23

System Configuration4-372. Configure the MU Traps field to generate traps for MU associations, MU association denials and MU authentication denials. W

Seite 24 - 1.1.12.3 WEP Encryption

AP-7131 Access Point Product Reference GuidexiiChapter 9. Configuring Mesh NetworkingMesh Networking Overview . . . . . . . . . . . . . . . . . . . .

Seite 25 - 1.1.12.4 KeyGuard Encryption

AP-7131 Access Point Product Reference Guide4-385. Configure the System Traps field to generate traps when the access point re-initializes during tran

Seite 26 - 1.1.12.8 VPN Tunnels

System Configuration4-397. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the settings displayed on SNMP Traps scree

Seite 27 - 1.1.13 VLAN Support

AP-7131 Access Point Product Reference Guide4-403. Configure the Minimum Packets field to define a minimum packet throughput value for trap generation

Seite 28 - 1.1.15 Updatable Firmware

System Configuration4-416. Click Logout to securely exit the access point Access Point applet. A prompt displays confirming the logout before the appl

Seite 29 - 1.1.19 Voice Prioritization

AP-7131 Access Point Product Reference Guide4-422. From within the Current Time field, click the Refresh button to update the time since the screen wa

Seite 30 - 1.1.22 Transmit Power Control

System Configuration4-435. If using an NTP server to supply system time to the access point, configure the NTP Server Configuration field to define th

Seite 31 - 1.1.26 DHCP Support

AP-7131 Access Point Product Reference Guide4-448. Click Logout to securely exit the access point Access Point applet. A prompt displays confirming th

Seite 32 - 1.1.28 Mesh Networking

System Configuration4-453. Click Apply to save any changes to the Logging Configuration screen. Navigating away from the screen without clicking the A

Seite 33 - 1.1.29 Additional LAN Subnet

AP-7131 Access Point Product Reference Guide4-464. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the settings displ

Seite 34 - 1.1.31 Hotspot Support

System Configuration4-47To create an importable/exportable access point configuration file:1. Select System Configuration - > Config Import/Export

Seite 35 - 1.1.36 Adaptive AP

xiiiConfiguration Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-6Securing Data Tunnels between the S

Seite 36 - 1.1.40 QBSS Support

AP-7131 Access Point Product Reference Guide4-483. Configure the HTTP Import/Export field to import/export access point configuration settings using H

Seite 37 - 1.2 Theory of Operations

System Configuration4-494. Refer to the Status field to assess the completion of the import/export operation. CAUTION For HTTP downloads (exports) to

Seite 38 - 1.2.2 MAC Layer Bridging

AP-7131 Access Point Product Reference Guide4-505. Click Apply to save the filename and Server IP information. The Apply button does not execute the i

Seite 39 - 1.2.3 Media Types

System Configuration4-51than the name of the file previously loaded on the access point or when the file version (on the server) is different than the

Seite 40 - 1.2.5 MU Association Process

AP-7131 Access Point Product Reference Guide4-52If a firmware update is required, use the Firmware Update screen to specify a filename and define a fi

Seite 41 - 1.2.6 Operating Modes

System Configuration4-533. Configure the DHCP Options checkboxes to enable/disable automatic firmware and/or configuration file updates.DHCP options a

Seite 42

AP-7131 Access Point Product Reference Guide4-54 If updating the access point manually, configure the Update Firmware fields as required to set a file

Seite 43

System Configuration4-555. If the target firmware file resides within a directory, specify a complete path for the file within the Filepath(optional)

Seite 44

AP-7131 Access Point Product Reference Guide4-56FAIL: user interruptedFAIL: no valid interface foundFAIL: conflict ip addressFAIL: command exchange ti

Seite 45 - Hardware Installation

Network ManagementRefer to the following for network management configuration activities supported by the access point user interface:• Configuring th

Seite 46 - 2.3 Package Contents

AP-7131 Access Point Product Reference GuidexivEmbedded Options - Using Option 43 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-2Global Opt

Seite 47 - 2.4 Access Point Placement

AP-7131 Access Point Product Reference Guide5-2For information on locating the access point’s MAC addresses, see Viewing WAN Statistics on page 7-2 an

Seite 48 - 2.4.2 Antenna Options

Network Management5-33. Refer to the LAN Ethernet Timeout field to define how LAN Ethernet inactivity is processed by the access point.Use the Etherne

Seite 49

AP-7131 Access Point Product Reference Guide5-4The access point only supports 802.1x authentication over its LAN port. The access point behaves as an

Seite 50 - 2.5 AP-7131 Power Options

Network Management5-57. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the settings displayed on the LAN configurati

Seite 51

AP-7131 Access Point Product Reference Guide5-6If it is not in the database, it simply uses a default VLAN assignment. The VLAN assignment is sent to

Seite 52

Network Management5-7To create a new VLAN, click the Add button, to edit the properties of an existing VLAN, click the Edit button.4. Assign a unique

Seite 53 - 2.7 Mounting an AP-7131

AP-7131 Access Point Product Reference Guide5-88. Enter a Management VLAN Tag for LAN1 and LAN2.The Management VLAN uses a default tag value of 1. The

Seite 54

Network Management5-9frame arrives on the access point, it queries the VMPS for the VLAN assignment based on the source MAC address of the arriving fr

Seite 55

AP-7131 Access Point Product Reference Guide5-102. Configure the DHCP Configuration field to define the DHCP settings used for the LAN.NOTE Motorola r

Seite 56

Network Management5-11This interface is a BOOTP ClientSelect this button to enable BOOTP to set access point network address information via this LAN1

Seite 57

About This GuideIntroductionThis guide provides configuration and setup information for the AP-7131 model access point Document ConventionsThe followi

Seite 58

AP-7131 Access Point Product Reference Guide5-123. Click Apply to save any changes to the LAN1 or LAN2 screen. Navigating away from the screen without

Seite 59

Network Management5-13To generate a list of client MAC address to IP address mappings for the access point:1. Select Network Configuration -> LAN -

Seite 60

AP-7131 Access Point Product Reference Guide5-146. Click OK to return to the LAN1 or LAN2 page, where the updated settings within the Advanced DHCP Se

Seite 61 - 2.8 AP-7131 LED Indicators

Network Management5-152. Use the all ethernet types, except drop-down menu to designate whether the Ethernet Types defined for the LAN are allowed or

Seite 62

AP-7131 Access Point Product Reference Guide5-16Packet types supported for the type filtering function include 16-bit DIX Ethernet types as well as Mo

Seite 63

Network Management5-172. Refer to the WAN IP Configuration field to enable the WAN interface, and set network address information for the WAN connecti

Seite 64 - 2.8.4 Rear AP-7131 LED

AP-7131 Access Point Product Reference Guide5-18This interface is a DHCP ClientThis checkbox enables DHCP for the access point WAN connection. This is

Seite 65 - 2.9 Setting Up MUs

Network Management5-193. Use the Port Settings field to define how the access point manages throughput over the WAN port.More IP Addresses Click the M

Seite 66

AP-7131 Access Point Product Reference Guide5-204. Configure the PPP over Ethernet field to enable high speed dial-up connections to the access point

Seite 67 - Getting Started

Network Management5-215. Click Apply to save any changes to the WAN screen. Navigating away from the screen without clicking the Apply button results

Seite 68 - 3.2 Configuration Options

AP-7131 Access Point Product Reference GuidexviiNotational ConventionsThe following notational conventions are used in this document:• Italics are use

Seite 69

AP-7131 Access Point Product Reference Guide5-225.2.1 Configuring Network Address Translation (NAT) SettingsNetwork Address Translation (NAT) converts

Seite 70

Network Management5-232. Configure the Address Mappings field to generate a WAN IP address, define the NAT type and set outbound/inbound NAT mappings.

Seite 71

AP-7131 Access Point Product Reference Guide5-243. Click Apply to save any changes to the NAT screen. Navigating away from the screen without clicking

Seite 72

Network Management5-254. Configure the Port Forwarding screen to modify the following:Add Click Add to create a local map that includes the name, tran

Seite 73

AP-7131 Access Point Product Reference Guide5-265. Click OK to return to the NAT screen. Within the NAT screen, click Apply to save any changes made o

Seite 74

Network Management5-272. Select the Enable checkbox to allow domain name information to be updated when the IP address associated with that domain cha

Seite 75

AP-7131 Access Point Product Reference Guide5-287. Once the DynDNS configuration has been updated, click the Show Update Response button to open a sub

Seite 76

Network Management5-29If a WLAN is defined, that WLAN displays within the Wireless Configuration screen. When the access point is first booted, WLAN1

Seite 77

AP-7131 Access Point Product Reference Guide5-303. Click the Create button (if necessary) to launch the New WLAN screen. Use the New WLAN screen to de

Seite 78

Network Management5-315.3.1 Creating/Editing Individual WLANsIf the WLANs displayed within the Wireless Configuration screen do not satisfy your netwo

Seite 79 - Generate

IntroductionAs a standalone access point, the AP-7131 provides small and medium-sized businesses with a consolidated wired and wireless networking inf

Seite 80 - 3.4.2 Testing Connectivity

AP-7131 Access Point Product Reference Guide5-323. Set the parameters in the Configuration field as required for the WLAN.ESSID Enter the Extended Ser

Seite 81 - 3.4.3 Where to Go from Here?

Network Management5-33Name Define or revise the name for the WLAN. The name should be logical representation of WLAN coverage area (engineering, marke

Seite 82

AP-7131 Access Point Product Reference Guide5-344. Configure the Security field as required to set the data protection requirements for the WLAN. Enab

Seite 83

Network Management5-355. Configure the Advanced field as required to set MU interoperability permissions, secure beacon transmissions, broadcast ESSID

Seite 84

AP-7131 Access Point Product Reference Guide5-366. Click Apply to save any changes to the WLAN screen. Navigating away from the screen without clickin

Seite 85

Network Management5-37Configuring a WLAN security scheme with a discussion of all the authentication and encryption options available is beyond the sc

Seite 86

AP-7131 Access Point Product Reference Guide5-385.3.1.2 Configuring a WLAN Access Control List (ACL)An Access Control List (ACL) affords a system admi

Seite 87

Network Management5-392. Click the Create button to configure a new ACL policy, or select a policy and click the Edit button to modify an existing ACL

Seite 88

AP-7131 Access Point Product Reference Guide5-40Either the New MU ACL Policy or Edit MU ACL Policy screens display.3. Assign a name to the new or edit

Seite 89

Network Management5-415. Click Apply to save any changes to the New MU ACL Policy or Edit MU ACL Policy screen and return to the Mobile Unit Access Co

Seite 90 - 4.3 Adaptive AP Setup

AP-7131 Access Point Product Reference Guide1-21.1 Feature OverviewAn AP-7131 access point supports the following feature set:• 802.11n Support• WIPS

Seite 91

AP-7131 Access Point Product Reference Guide5-422. Click the Create button to configure a new QoS policy, or select a policy and click the Edit button

Seite 92

Network Management5-433. Assign a name to the new or edited QoS policy that makes sense to the access point traffic receiving priority. More than one

Seite 93 - 4.4 Configuring Data Access

AP-7131 Access Point Product Reference Guide5-445. Use the two Multicast Address fields to specify one or two MAC addresses to be used for multicast a

Seite 94

Network Management5-45 8. Configure the CW min and CW max (contention windows), AIFSN (Arbitrary Inter-Frame Space Number) and TXOPs Time (opportunity

Seite 95

AP-7131 Access Point Product Reference Guide5-469. Click Apply to save any changes to the New QoS Policy or Edit QoS Policy screen to return to the Qu

Seite 96

Network Management5-475.3.1.4 Configuring WLAN Hotspot SupportThe access point enables hotspot operators to provide user authentication and accounting

Seite 97

AP-7131 Access Point Product Reference Guide5-483. Refer to the HTTP Redirection field to specify how the Login, Welcome, and Fail pages are maintaine

Seite 98

Network Management5-494. Use the External URL field to specify the location of the login page, welcome page and fail page used for hotspot access. Def

Seite 99

AP-7131 Access Point Product Reference Guide5-506. Click the White List Entries button (within the WhiteList Configuration field) to create a set of a

Seite 100

Network Management5-518. Refer to the Radius Configuration field to define a primary and secondary Radius server port and shared secret password.9. Cl

Seite 101 - System Configuration

Introduction1-3• On-board Radius Server Authentication• Hotspot Support• Routing Information Protocol (RIP)• Manual Date and Time Settings• Dynamic DN

Seite 102

AP-7131 Access Point Product Reference Guide5-52When a client requests a URL from a Web server, the login handler returns an HTTP redirection status c

Seite 103

Network Management5-535.3.2 Setting the WLAN’s Radio ConfigurationEach access point WLAN can have a separate 802.11a/n or 802.11b/g/n radio configured

Seite 104

AP-7131 Access Point Product Reference Guide5-542. Enable the radio(s) using the Enable checkbox(es).Review the Radio Function to assess if this radio

Seite 105

Network Management5-554. If the Base Bridge checkbox has been selected, use the Max# Client Bridges parameter to define the client bridge load on a pa

Seite 106

AP-7131 Access Point Product Reference Guide5-56Once the settings within the Radio Configuration screen are applied (for an initial deployment), the c

Seite 107 - 4.6 Configuring SNMP Settings

Network Management5-57For a detailed overview on mesh networking and how to configure the radio for mesh networking support, see Configuring Mesh Netw

Seite 108 - Feature MIB Feature MIB

AP-7131 Access Point Product Reference Guide5-582. Configure the Properties field to assign a name and placement designation for the radio.Placement U

Seite 109

Network Management5-593. Configure the Channel, Power and Rate Settings field to assign a channel, antenna diversity setting, radio transmit power lev

Seite 110

AP-7131 Access Point Product Reference Guide5-60Channel Width Select the Channel Width (MHz) from the drop-down menu. The AP radio can support 20 and

Seite 111 - SNMP v3 user definitions

Network Management5-61Set Rates Click the Set Rates button to define minimum and maximum data transmit rates for the radio. Use the Basic Rates drop-d

Seite 112

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Symbol is a registered trademark of Symbol Technologies, Inc.

Seite 113

AP-7131 Access Point Product Reference Guide1-41.1.3 Power Setting ConfigurationThe AP-7131 power setting feature enables the user to select one of tw

Seite 114

AP-7131 Access Point Product Reference Guide5-624. Configure the Performance field to set the preamble, thresholds values and QoS values for the radio

Seite 115 - 4.6.2 Enabling SNMP Traps

Network Management5-63Support Short PreambleThe preamble is approximately 8 bytes of packet header generated by the access point and attached to a pac

Seite 116

AP-7131 Access Point Product Reference Guide5-64Set Aggregation Select the Enable Transmit A-MSDU checkbox (within theA-MSDU Aggregation field) to all

Seite 117

Network Management5-655. Refer to the Beacon Settings field to set the radio beacon and DTIM intervals.Beacon Interval The beacon interval controls th

Seite 118

AP-7131 Access Point Product Reference Guide5-666. Refer to the QBSS Load Element Settings field to determine whether channel usage data is transmitte

Seite 119

Network Management5-67be defined from within the WLANs assigned to BSSID groups 1 through 4. Each BSSID beacons only on the primary WLAN. The user sho

Seite 120

AP-7131 Access Point Product Reference Guide5-6811. Click Logout to securely exit the Access Point applet. A prompt displays confirming the logout bef

Seite 121

Network Management5-692. Select either the Radio 1(802.11b/g/n) or Radio 2(802.11a/n) tab to display the WLANs enabled for the selected radio and thei

Seite 122

AP-7131 Access Point Product Reference Guide5-705. Click Apply to save any changes to the Bandwidth Management screen. Navigating away from the screen

Seite 123

Network Management5-71The following is a network topology illustrating how WIPS functions within an AP-7131 supported wireless network:To define the a

Seite 124

Introduction1-5For detailed information on configuring the LAN port, see Configuring the LAN Interface on page 5-1. A Wide Area Network (WAN) is a wi

Seite 125

AP-7131 Access Point Product Reference Guide5-72The Wireless Intrusion Prevention System screen displays.2. Within the WIPS Status field, define wheth

Seite 126 - 4.8 Logging Configuration

Network Management5-734. Click Apply to save any changes to the WIPS screen. Navigating away from the screen without clicking Apply results in all cha

Seite 127

AP-7131 Access Point Product Reference Guide5-74The access point Router Table field displays a list of connected routes between an enabled subnet and

Seite 128

Network Management5-755.5.1 Setting the RIP ConfigurationTo set the RIP configuration:1. From within the RIP Configuration field, select the RIP Type

Seite 129

AP-7131 Access Point Product Reference Guide5-763. If RIP v2 or RIP v2 (v1 compat) is the selected RIP type, the RIP v2 Authentication field becomes a

Seite 130

Network Management5-775. If the MD5 authentication method is selected, fill in the Key #1 field (Key #2 is optional). Enter any numeric value between

Seite 131

AP-7131 Access Point Product Reference Guide5-78

Seite 132 - 4.10 Updating Device Firmware

Configuring Access Point SecuritySecurity measures for the access point and its WLANs are critical. Use the available access point security options to

Seite 133

AP-7131 Access Point Product Reference Guide6-26.1 Configuring Security OptionsTo configure the data protection options available on the access point,

Seite 134

Configuring Access Point Security6-36.2 Setting PasswordsBefore setting the access point security parameters, verify an administrative password for th

Seite 135

AP-7131 Access Point Product Reference Guide1-6To enable and configure WLANs on an access point radio, see Enabling Wireless LANs (WLANs) on page 5-28

Seite 136

AP-7131 Access Point Product Reference Guide6-45. Enter the previous password and the new admin password in the two fields provided. Click the Apply b

Seite 137

Configuring Access Point Security6-56.3 Enabling Authentication and Encryption Schemes To complement the built-in firewall filters on the WAN side of

Seite 138 - FAIL: invalid subnet number

AP-7131 Access Point Product Reference Guide6-6However, selecting any other authetnication or encryption checkbox displays a configuration field for t

Seite 139 - Network Management

Configuring Access Point Security6-76. Click Apply to keep changes made within the New Security Policy screen (if any). Configure encryption or authen

Seite 140

AP-7131 Access Point Product Reference Guide6-87. Click Cancel to return to the target WLAN screen without keeping any of the changes made within the

Seite 141

Configuring Access Point Security6-94. Ensure the Name of the security policy entered suits the intended configuration or function of the policy.5. Se

Seite 142

AP-7131 Access Point Product Reference Guide6-106. Click the Apply button to return to the WLAN screen to save any changes made within the Kerberos Co

Seite 143

Configuring Access Point Security6-11by clicking the Edit button. To configure a new security policy supporting 802.1x EAP, continue to step 2.2. Clic

Seite 144

AP-7131 Access Point Product Reference Guide6-126. Configure the Server Settings field as required to define address information for the authenticatio

Seite 145

Configuring Access Point Security6-137. Select the Accounting tab as required to define a timeout period and retry interval Syslog for MUs interoperat

Seite 146

Introduction1-7For detailed information on configuring QoS support, see Setting the WLAN Quality of Service (QoS) Policy on page 5-41. 1.1.12 Industry

Seite 147

AP-7131 Access Point Product Reference Guide6-149. Select the Advanced Settings tab as required to specify a MU quiet period, timeout interval, transm

Seite 148

Configuring Access Point Security6-156.6 Configuring WEP EncryptionWired Equivalent Privacy (WEP) is a security protocol specified in the IEEE Wireles

Seite 149

AP-7131 Access Point Product Reference Guide6-165. Configure the WEP 64 Settings or WEP 128 Settings field as required to define the Pass Key used to

Seite 150

Configuring Access Point Security6-17Default (hexadecimal) keys for WEP 128 include:6. Click the Apply button to save any changes made within the WEP

Seite 151

AP-7131 Access Point Product Reference Guide6-183. Select the KeyGuard radio button.The KeyGuard Settings field displays within the New Security Polic

Seite 152

Configuring Access Point Security6-19Default (hexadecimal) keys for KeyGuard include: 6. Select the Allow WEP128 Clients checkbox (from within the Key

Seite 153

AP-7131 Access Point Product Reference Guide6-20If security policies supporting WPA-TKIP exist, they appear within the Security Configuration screen.

Seite 154 - 5.2 Configuring WAN Settings

Configuring Access Point Security6-216. Configure the Key Settings area as needed to set an ASCII Passphrase and key values.Default (hexadecimal) 256-

Seite 155

AP-7131 Access Point Product Reference Guide6-228. Configure the Fast Roaming (802.1x only) field as required to enable additional access point roamin

Seite 156

Configuring Access Point Security6-23by clicking the Edit button. To configure a new security policy supporting WPA2-CCMP, continue to step 2.2. Click

Seite 157 - WAN port

AP-7131 Access Point Product Reference Guide1-8(specified in RFC 1510) to authenticate users/clients in a wireless network environment and to securely

Seite 158

AP-7131 Access Point Product Reference Guide6-246. Configure the Key Settings area as needed to set an ASCII Passphrase and 128-bit key.Default (hexad

Seite 159

Configuring Access Point Security6-258. Configure the Fast Roaming (802.1x only) field as required to enable additional access point roaming and key c

Seite 160

AP-7131 Access Point Product Reference Guide6-26in order to reduce processor overhead. Use the WLAN Security screens (WEP, Kerberos etc.) as required

Seite 161

Configuring Access Point Security6-274. Refer to the Configurable Firewall Filters field to set the following firewall filters:5. Click Apply to save

Seite 162

AP-7131 Access Point Product Reference Guide6-287. Click Logout to securely exit the Access Point applet. A prompt displays confirming the logout befo

Seite 163

Configuring Access Point Security6-293. Configure the Rules field as required to allow or deny access to selected (enabled) protocols.Allow or Deny al

Seite 164 - 5.2.2 Configuring Dynamic DNS

AP-7131 Access Point Product Reference Guide6-30Pre configured Rules The following protocols are preconfigured with the access point. To enable a prot

Seite 165

Configuring Access Point Security6-314. Click Apply to save any changes to the Subnet Access screen. Navigating away from the screen without clicking

Seite 166

AP-7131 Access Point Product Reference Guide6-32between two end points. ESP can also be used in tunnel mode, providing security like that of a Virtual

Seite 167

Configuring Access Point Security6-332. Configure the Settings field as needed to override the settings in the Subnet Access screen and import firewal

Seite 168

Introduction1-9formulas called algorithms, before the information is transmitted. An algorithm is a set of instructions or formula for scrambling the

Seite 169

AP-7131 Access Point Product Reference Guide6-344. Click Apply to save any changes to the Advanced Subnet Access screen. Navigating away from the scre

Seite 170

Configuring Access Point Security6-35Use the VPN screen to add and remove VPN tunnels. To configure an existing VPN tunnel, select it from the list in

Seite 171

AP-7131 Access Point Product Reference Guide6-36If access point #1 has the following values:• WAN IP address: 20.1.1.2• LAN IP address: 10.1.1.1• Subn

Seite 172

Configuring Access Point Security6-37Interface name Use the drop-down menu to specify the LAN1, LAN2 or WAN connection used for routing VPN traffic. R

Seite 173

AP-7131 Access Point Product Reference Guide6-384. Click Apply to save any changes to the VPN screen as well as changes made to the Auto Key Settings,

Seite 174

Configuring Access Point Security6-393. Configure the Manual Key Settings screen to modify the following:NOTE When entering Inbound or Outbound encryp

Seite 175

AP-7131 Access Point Product Reference Guide6-40AH Authentication AH provides data authentication and anti-replay services for the VPN tunnel. Select

Seite 176

Configuring Access Point Security6-41ESP Encryption Algorithm Select the encryption and authentication algorithms for the VPN tunnel using the drop-do

Seite 177

AP-7131 Access Point Product Reference Guide6-42The Inbound and Outbound SPI settings are required to be interpolated to function correctly. For examp

Seite 178

Configuring Access Point Security6-433. Configure the Auto Key Settings screen to modify the following:Use Perfect Forward SecrecyForward secrecy is a

Seite 179

AP-7131 Access Point Product Reference Guide1-10• a message integrity check • an extended initialization vector with sequencing rules • a re-keying me

Seite 180

AP-7131 Access Point Product Reference Guide6-444. Click Ok to return to the VPN screen. Click Apply to retain the settings made on the Auto Key Setti

Seite 181

Configuring Access Point Security6-456.11.3 Configuring IKE Key SettingsThe Internet Key Exchange (IKE) is an IPsec standard protocol used to ensure s

Seite 182

AP-7131 Access Point Product Reference Guide6-46Operation Mode The Phase I protocols of IKE are based on the ISAKMP identity-protection and aggressive

Seite 183

Configuring Access Point Security6-47IKE Authentication Mode Select the appropriate IKE authentication mode:• Pre-Shared Key (PSK) - Specify an authen

Seite 184

AP-7131 Access Point Product Reference Guide6-484. Click Ok to return to the VPN screen. Click Apply to retain the settings made on the IKE Settings s

Seite 185

Configuring Access Point Security6-492. Reference the Security Associations field to view the following: Tunnel Name The Tunnel Name column lists the

Seite 186

AP-7131 Access Point Product Reference Guide6-503. Click the Reset VPNs button to reset active VPNs. Selecting Reset VPNs forces renegotiation of all

Seite 187

Configuring Access Point Security6-51To configure content filtering for the access point: 1. Select Network Configuration -> WAN -> Content Filt

Seite 188

AP-7131 Access Point Product Reference Guide6-523. Configure the SMTP field to disable or restrict specific kinds of network mail traffic.4. Configure

Seite 189

Configuring Access Point Security6-535. Click Apply to save any changes to the Content Filtering screen. Navigating away from the screen without click

Seite 190

Introduction1-11network; however, because the data travels through the public network, it needs several layers of security. The access point can funct

Seite 191

AP-7131 Access Point Product Reference Guide6-54The rogue detection interval is used in conjunction with Motorola MUs that identify themselves as rogu

Seite 192

Configuring Access Point Security6-552. Configure the Detection Method field to set the detection method (MU or access point) and define the 802.11a/n

Seite 193

AP-7131 Access Point Product Reference Guide6-563. Use the Allowed AP List field to restrict Motorola AP’s from Rogue AP detection and create a list o

Seite 194

Configuring Access Point Security6-574. Click Apply to save any changes to the Rogue AP Detection screen. Navigating away from the screen without clic

Seite 195

AP-7131 Access Point Product Reference Guide6-58The Active APs screen displays with detected rogue devices displayed within the Rogue APs table.2. Ent

Seite 196

Configuring Access Point Security6-596. Highlight a rogue AP and click the Details button to display a screen with device and detection information sp

Seite 197

AP-7131 Access Point Product Reference Guide6-603. Refer to the Rogue AP Detail field for the following information:4. Refer to the Rogue Detector Det

Seite 198

Configuring Access Point Security6-615. Click OK to securely exit the Detail screen and return to the Active APs screen.6. Click Cancel (if necessary)

Seite 199

AP-7131 Access Point Product Reference Guide6-622. Highlight an MU from within the Rogue AP enabled MUs field and click the scan button.The target MU

Seite 200

Configuring Access Point Security6-635. Highlight a different MU from the Rogue AP enabled MUs field as needed to scan for additional rogue APs.6. Cli

Seite 201

AP-7131 Access Point Product Reference Guide1-12• Command Line Interface (CLI) accessed via RS-232 or Telnet. Use the access point’s DB-9 serial port

Seite 202

AP-7131 Access Point Product Reference Guide6-642. From within the Data Source Configuration field, use the Data Source drop-down menu to select the d

Seite 203

Configuring Access Point Security6-65Default Authentication TypeSpecify a PEAP and/or TTLS Authentication Type for EAP to use from the drop-down menu

Seite 204

AP-7131 Access Point Product Reference Guide6-664. Use the Radius Client Authentication table to configure multiple shared secrets based on the subnet

Seite 205

Configuring Access Point Security6-672. Enter the appropriate information within the LDAP Configuration field to allow the access point to interoperat

Seite 206

AP-7131 Access Point Product Reference Guide6-683. Click Apply to save any changes to the LDAP screen. Navigating away from the screen without clickin

Seite 207

Configuring Access Point Security6-696.14.3 Configuring a Proxy Radius ServerThe access point has the capability to proxy authentication requests to a

Seite 208

AP-7131 Access Point Product Reference Guide6-702. Refer to the Proxy Configuration field to define the proxy server’s retry count and timeout values.

Seite 209

Configuring Access Point Security6-714. To remove a row, select the row and click the Del (Delete) button.5. Click Apply to save any changes to the Pr

Seite 210

AP-7131 Access Point Product Reference Guide6-72Refer to the Groups field for a list of all groups in the local Radius database. The groups are listed

Seite 211

Configuring Access Point Security6-737. Click the List of Groups cell. A new screen displays enabling you to associate groups with the user. For more

Seite 212

Introduction1-13Ethernet infrastructure. This often required an electrical contractor to install power drops at each access point location. An approve

Seite 213 - To set the RIP configuration:

AP-7131 Access Point Product Reference Guide6-743. To add the user to a group, select the group in the Available list (on the right) and click the <

Seite 214

Configuring Access Point Security6-756.14.5 Defining User Access Permissions by GroupAn external AAA server maintains the users and groups database us

Seite 215

AP-7131 Access Point Product Reference Guide6-76The Access Policy screen displays the following fields: Groups The Groups field displays the names of

Seite 216

Configuring Access Point Security6-772. Review the existing access intervals assigned to each group by selecting the group from amongst those displaye

Seite 217

AP-7131 Access Point Product Reference Guide6-784. Define up to 10 access policies for the selected group within the Time Based Access Policy field.Us

Seite 218

Configuring Access Point Security6-795. Refer to the WLANs field to select existing WLANs to apply to the selected group’s set of access permissions.

Seite 219 - 6.2 Setting Passwords

AP-7131 Access Point Product Reference Guide6-80

Seite 220

Monitoring StatisticsThe access point has functionality to display robust transmit and receive statistics for its WAN and LAN port. Wireless Local Are

Seite 221

AP-7131 Access Point Product Reference Guide7-2See the following sections for more details on viewing statistics for the access point:• Viewing WAN St

Seite 222

Monitoring Statistics7-32. Refer to the Information field to reference the following access point WAN data:Status The Status field displays Enabled if

Seite 223

AP-7131 Access PointProduct Reference Guide72E-124686-01Revision AMay 2009

Seite 224

AP-7131 Access Point Product Reference Guide1-141.1.20 Support for CAM and PSP MUsThe access point supports both CAM and PSP powered MUs. CAM (Continu

Seite 225

AP-7131 Access Point Product Reference Guide7-43. Refer to the Received field to reference data received over the access point WAN port.Mask The Mask

Seite 226

Monitoring Statistics7-54. Refer to the Transmitted field to reference data received over the access point WAN port.5. Click the Clear WAN Stats butto

Seite 227

AP-7131 Access Point Product Reference Guide7-67.2 Viewing LAN StatisticsUse the LAN Stats screen to monitor the activity of the access point’s LAN1 o

Seite 228

Monitoring Statistics7-73. Refer to the Received field to view data received over the access point LAN port.Status Displays whether this particular LA

Seite 229

AP-7131 Access Point Product Reference Guide7-84. Refer to the Transmitted field to view statistics transmitted over the access point LAN port.RX Erro

Seite 230

Monitoring Statistics7-95. Click the Clear LAN Stats button to reset each of the data collection counters to zero in order to begin new data collectio

Seite 231

AP-7131 Access Point Product Reference Guide7-102. Refer to the Spanning Tree Info field to for details on spanning tree state, and root access point

Seite 232

Monitoring Statistics7-113. Refer to the Port Interface Table to assess the state of the traffic over the ports listed within the table for the root a

Seite 233

AP-7131 Access Point Product Reference Guide7-124. Click the Logout button to securely exit the Access Point applet. There will be a prompt confirming

Seite 234

Monitoring Statistics7-132. Refer to the WLAN Summary field to reference high-level data for each enabled WLAN.Name Displays the names of all the enab

Seite 235

Introduction1-151.1.23 Advanced Event Logging CapabilityThe access point periodically logs system events. Logging events is useful in assessing the th

Seite 236

AP-7131 Access Point Product Reference Guide7-143. Refer to the Total AP RF Traffic field to view throughput information for the access point and WLAN

Seite 237

Monitoring Statistics7-157.3.1 Viewing WLAN StatisticsUse the WLAN Stats screen to view detailed statistics for individual WLANs.The WLAN Stats screen

Seite 238

AP-7131 Access Point Product Reference Guide7-163. Refer to the Traffic field to view performance and throughput information for the WLAN selected fro

Seite 239

Monitoring Statistics7-174. Refer to the RF Status field to view the following MU signal, noise and performance information for the WLAN selected from

Seite 240

AP-7131 Access Point Product Reference Guide7-186. Click the Clear WLAN Stats button to reset each of the data collection counters to zero in order to

Seite 241

Monitoring Statistics7-192. Refer to the Radio Summary field to reference access point radio information.Type Displays the type of radio (either 802.1

Seite 242

AP-7131 Access Point Product Reference Guide7-203. Click the Clear All Radio Stats button to reset each of the data collection counters to zero in ord

Seite 243

Monitoring Statistics7-212. Refer to the Information field to view the access point 802.11a/n or 802.11b/g/n radio’s MAC address, placement and transm

Seite 244

AP-7131 Access Point Product Reference Guide7-223. Refer to the Traffic field to view performance and throughput information for the target access poi

Seite 245

Monitoring Statistics7-234. Refer to the RF Status field to view the following MU signal, noise and performance information for the target access poin

Seite 246

AP-7131 Access Point Product Reference Guide1-16The DHCP client automatically sends a DHCP request at an interval specified by the DHCP server to rene

Seite 247 - 6.10.1.1 Available Protocols

AP-7131 Access Point Product Reference Guide7-247. Click the Logout button to securely exit the Access Point applet.7.4.1.1 Retry HistogramRefer to th

Seite 248

Monitoring Statistics7-25abundance of retries warrants reconfiguring the access point radio to achieve better performance.2. Click Apply to save any c

Seite 249

AP-7131 Access Point Product Reference Guide7-262. Refer to the MU List field to reference associated MU address, throughput and retry information.IP

Seite 250 - 6.11 Configuring VPN Tunnels

Monitoring Statistics7-273. Click the Refresh button to update the data collections displayed without resetting the data collections to zero.4. Click

Seite 251

AP-7131 Access Point Product Reference Guide7-281. Select Status and Statistics -> MU Stats from the access point menu tree.2. Highlight a specific

Seite 252

Monitoring Statistics7-296. Refer to the RF Status field to view MU signal and signal disturbance information.7. Refer to the Errors field to view MU

Seite 253

AP-7131 Access Point Product Reference Guide7-308. Click OK to exit the screen. 7.5.2 Pinging Individual MUsThe access point can verify its link with

Seite 254

Monitoring Statistics7-314. Click the Ping button to begin transmitting ping packets to the station address specified.Refer to the Number of Responses

Seite 255

AP-7131 Access Point Product Reference Guide7-327.6 Viewing the Mesh Statistics SummaryThe access point has the capability of detecting and displaying

Seite 256

Monitoring Statistics7-332. Click the Refresh button to update the display of the Mesh Statistics Summary screen to the latest values.3. Click the Det

Seite 257

Introduction1-17Once the access point (in client bridge mode) establishes at least one wireless connection, it establishes other wireless connections

Seite 258

AP-7131 Access Point Product Reference Guide7-344. Click the Logout button to securely exit the Access Point applet. A prompt displays confirming the

Seite 259

Monitoring Statistics7-35indicating their channel, IP address, firmware version, etc. This information is used to create a known AP list. The list has

Seite 260 - Key Settings screen

AP-7131 Access Point Product Reference Guide7-362. Click the Clear Known AP Stats button to reset each of the data collection counters to zero in orde

Seite 261

Monitoring Statistics7-37firmware version, ESS and client bridges currently connected to the AP radio. Use this information to determine whether this

Seite 262

AP-7131 Access Point Product Reference Guide7-38

Seite 263

CLI ReferenceThe access point Command Line Interface (CLI) is accessed through the serial port or a Telnet session. The access point CLI follows the s

Seite 264 - 6.11.4 Viewing VPN Status

AP-7131 Access Point Product Reference Guide8-28.1 Connecting to the CLI 8.1.1 Accessing the CLI through the Serial PortTo connect to the access point

Seite 265

8-38.2 Admin and Common CommandsAP7131>admin>Description: Displays admin configuration options. The items available under this command are shown

Seite 266

AP-7131 Access Point Product Reference Guide8-4AP7131>admin>helpDescription: Displays general CLI user interface help.Syntax: Example: admin>

Seite 267

8-5AP7131>admin>passwdDescription: Changes the password for the admin login. Syntax: Example: admin>passwdOld Admin Password:****** New Admin

Seite 268

AP-7131 Access Point Product Reference Guide1-18screen enables the administrator to set WLAN access based on user groups defined within the User Datab

Seite 269

AP-7131 Access Point Product Reference Guide8-6AP7131>admin>summaryDescription: Displays the access point’s system summary. Syntax: Example:admi

Seite 270

8-7AP7131>admin>..Description: Displays the parent menu of the current menu. This command appears in all of the submenus under admin. In each ca

Seite 271

AP-7131 Access Point Product Reference Guide8-8AP7131>admin> /Description: Displays the root menu, that is, the top-level CLI menu. This command

Seite 272

8-9AP7131>admin>saveDescription: Saves the configuration to system flash. The save command appears in all of the submenus under admin. In each c

Seite 273

AP-7131 Access Point Product Reference Guide8-10AP7131>admin>quitDescription: Exits the command line interface session and terminates the sessio

Seite 274

8-118.3 Network CommandsAP7131>admin(network)>Description: Displays the network submenu. The items available under this command are shown below.

Seite 275 - Details button

AP-7131 Access Point Product Reference Guide8-128.3.1 Network LAN CommandsAP7131>admin(network.lan)>Description: Displays the LAN submenu. The i

Seite 276 - 4. Refer to the

8-13AP7131>admin(network.lan)> showDescription: Displays the access point LAN settings. Syntax: Example:admin(network.lan)>showLAN On Etherne

Seite 277

AP-7131 Access Point Product Reference Guide8-14Network Mask : 255.255.255.255 Default Gateway : 192.168.1.1Domain Name : Primary DNS Server : 192

Seite 278

8-15AP7131>admin(network.lan)> setDescription: Sets the LAN parameters for the LAN port. Syntax: Example: admin(network.lan)>admin(network.la

Seite 279

Introduction1-191.1.33 Manual Date and Time SettingsAs an alternative to defining a NTP server to provide access point system time, the access point c

Seite 280

AP-7131 Access Point Product Reference Guide8-168.3.1.1 Network LAN, Bridge CommandsAP7131>admin(network.lan.bridge)>Description: Displays the a

Seite 281

8-17AP7131>admin(network.lan.bridge)> showDescription: Displays the mesh bridge configuration parameters for the access point’s LANs.Syntax: Ex

Seite 282

AP-7131 Access Point Product Reference Guide8-18AP7131>admin(network.lan.bridge)> setDescription: Sets the mesh configuration parameters for th

Seite 283

8-198.3.1.2 Network LAN, WLAN-Mapping Commands AP7131>admin(network.lan.wlan-mapping)>Description: Displays the WLAN/Lan/Vlan Mapping submenu.Fo

Seite 284

AP-7131 Access Point Product Reference Guide8-20AP7131>admin(network.lan.wlan-mapping)> show Description: Displays the VLAN list currently defi

Seite 285

8-21admin(network.lan.wlan-mapping)>show wlanWLAN1:WLAN Name :WLAN1ESSID :101Radio :VLAN :Security Policy :DefaultQoS Policy :DefaultFor informatio

Seite 286

AP-7131 Access Point Product Reference Guide8-22AP7131>admin(network.lan.wlan-mapping)> set Description: Sets VLAN parameters for the access po

Seite 287

8-23AP7131>admin(network.lan.wlan-mapping)> create Description:Creates a VLAN for the access point. Syntax: Example:admin(network.lan.wlan-mappi

Seite 288

AP-7131 Access Point Product Reference Guide8-24AP7131>admin(network.lan.wlan-mapping)> editDescription:Modifies a VLAN’s name and ID.Syntax: F

Seite 289

8-25AP7131>admin(network.lan.wlan-mapping)> deleteDescription:Deletes a specific VLAN or all VLANs.Syntax: For information on deleting VLANs us

Seite 290 - Delete-> button

AP-7131 Access Point Product Reference Guide1-20For a information overview of the adaptive AP feature as well as how to configure it, refer to Adaptiv

Seite 291

AP-7131 Access Point Product Reference Guide8-26AP7131>admin(network.lan.wlan-mapping)> lan-mapDescription:Maps an access point VLAN to a WLAN.S

Seite 292

8-27AP7131>admin(network.lan.wlan-mapping)> vlan-mapDescription:Maps an access point VLAN to a WLAN.Syntax: admin(network.lan.wlan-mapping)>v

Seite 293

AP-7131 Access Point Product Reference Guide8-288.3.1.3 Network LAN, DHCP CommandsAP7131>admin(network.lan.dhcp)>Description: Displays the acces

Seite 294

8-29AP7131>admin(network.lan.dhcp)> showDescription: Shows DHCP parameter settings.Syntax: Example:admin(network.lan.dhcp)>show**LAN1 DHCP I

Seite 295

AP-7131 Access Point Product Reference Guide8-30AP7131>admin(network.lan.dhcp)> setDescription: Sets DHCP parameters for the LAN port. Syntax:Ex

Seite 296

8-31AP7131>admin(network.lan.dhcp)> addDescription: Adds static DHCP address assignments. Syntax: Example: admin(network.lan.dhcp)>add 1 00A0

Seite 297 - Monitoring Statistics

AP-7131 Access Point Product Reference Guide8-32AP7131>admin(network.lan.dhcp)> deleteDescription: Deletes static DHCP address assignments. Synt

Seite 298 - 7.1 Viewing WAN Statistics

8-33AP7131>admin(network.lan.dhcp)> listDescription: Lists static DHCP address assignments. Syntax:Example:admin(network.lan.dhcp)>list 1----

Seite 299

AP-7131 Access Point Product Reference Guide8-348.3.1.4 Network Type Filter CommandsAP7131>admin(network.lan.type-filter)>Description: Displays

Seite 300

8-35AP7131>admin(network.lan.type-filter)> showDescription: Displays the access point’s current Ethernet Type Filter configuration. Syntax:Examp

Seite 301

Introduction1-21For information on enabling QBSS and defining the channel utilization transmission interval, see Configuring the 802.11a/n or 802.11b/

Seite 302 - 7.2 Viewing LAN Statistics

AP-7131 Access Point Product Reference Guide8-36AP7131>admin(network.lan.type-filter)> setDescription: Defines the access point Ethernet Type Fi

Seite 303

8-37AP7131>admin(network.lan.type-filter)> addDescription: Adds an Ethernet Type Filter entry. Syntax: Example: admin(network.lan.type-filter)&g

Seite 304

AP-7131 Access Point Product Reference Guide8-38AP7131>admin(network.lan.type-filter)> deleteDescription: Removes an Ethernet Type Filter entry

Seite 305

8-398.3.2 Network WAN CommandsAP7131>admin(network.wan)>Description: Displays the WAN submenu. The items available under this command are shown

Seite 306

AP-7131 Access Point Product Reference Guide8-40AP7131>admin(network.wan)> showDescription: Displays the access point WAN port parameters. Synta

Seite 307

8-41AP7131>admin(network.wan)> setDescription: Defines the configuration of the access point WAN port. Syntax: Example: admin(network.wan)>ad

Seite 308

AP-7131 Access Point Product Reference Guide8-428.3.2.1 Network WAN NAT CommandsAP7131>admin(network.wan.nat)>Description: Displays the NAT subm

Seite 309

8-43AP7131>admin(network.wan.nat)> showDescription: Displays access point NAT parameters. Syntax: Example: admin(network.wan.nat)>show 2WAN I

Seite 310

AP-7131 Access Point Product Reference Guide8-44AP7131>admin(network.wan.nat)> setDescription: Sets NAT inbound and outbound parameters. Syntax:

Seite 311 - 7.3.1 Viewing WLAN Statistics

8-45AP7131>admin(network.wan.nat)> addDescription: Adds NAT entries. Syntax: Example: admin(network.wan.nat)>add 1 indoors udp 20 29 10.10.2.

Seite 312

AP-7131 Access Point Product Reference Guide1-22• Management Access Options• AP-7131 MAC Address Assignment1.2.1 Wireless CoverageAn access point esta

Seite 313

AP-7131 Access Point Product Reference Guide8-46AP7131>admin(network.wan.nat)> deleteDescription: Deletes NAT entries. Syntax: Example:admin(net

Seite 314

8-47AP7131>admin(network.wan.nat)> listDescription: Lists access point NAT entries for the specified index. Syntax: Example: admin(network.wan.n

Seite 315

AP-7131 Access Point Product Reference Guide8-488.3.2.2 Network WAN, VPN CommandsAP7131>admin(network.wan.vpn)>Description: Displays the VPN sub

Seite 316

8-49AP7131>admin(network.wan.vpn)> add Description: Adds a VPN tunnel entry. Syntax: Example: admin(network.wan.vpn)>add 2 SJSharkey 209.235.

Seite 317

AP-7131 Access Point Product Reference Guide8-50AP7131>admin(network.wan.vpn)> setDescription: Sets VPN entry parameters. Syntax: set type <n

Seite 318

8-51For information on configuring VPN using the applet (GUI), see Configuring VPN Tunnels on page 6-35. salife <name> <lifetime> Defines

Seite 319

AP-7131 Access Point Product Reference Guide8-52AP7131>admin(network.wan.vpn)> deleteDescription: Deletes VPN tunnel entries. Syntax: Example: a

Seite 320 - 7.4.1.1 Retry Histogram

8-53AP7131>admin(network.wan.vpn)> listDescription: Lists VPN tunnel entries. Syntax: Example:admin(network.wan.vpn)>list--------------------

Seite 321

AP-7131 Access Point Product Reference Guide8-54AP7131>admin(network.wan.vpn)> resetDescription: Resets all of the access point’s VPN tunnels. S

Seite 322

8-55AP7131>admin(network.wan.vpn)> statsDescription: Lists statistics for all active tunnels. Syntax: Example: admin(network.wan.vpn)>stats -

Seite 323 - 7.5.1 Viewing MU Details

Introduction1-23interface to another. The bridge forwards packets addressed to unknown systems to the Default Interface (Ethernet). The access point i

Seite 324

AP-7131 Access Point Product Reference Guide8-56AP7131>admin(network.wan.vpn)> ikestateDescription: Displays statistics for all active tunnels u

Seite 325

8-578.3.2.3 AP7131>admin(network.wan.content)>Description: Displays the Outbound Content Filtering menu. The items available under this command

Seite 326 - 7.5.2 Pinging Individual MUs

AP-7131 Access Point Product Reference Guide8-58AP7131>admin(network.wan.content)> addcmdDescription: Adds control commands to block outbound tr

Seite 327

8-59AP7131>admin(network.wan.content)> delcmdDescription: Deletes control commands to block outbound traffic. Syntax:Example:admin(network.wan.c

Seite 328

AP-7131 Access Point Product Reference Guide8-60AP7131>admin(network.wan.content)> listDescription: Lists application control commands. Syntax:E

Seite 329

8-618.3.2.4 Network WAN, Dynamic DNS CommandsAP7131>admin(network.wan.dyndns)>Description: Displays the Dynamic DNS submenu. The items available

Seite 330

AP-7131 Access Point Product Reference Guide8-62AP7131>admin(network.wan.dyndns)> setDescription: Sets the access point’s Dynamic DNS configurat

Seite 331

8-63AP7131>admin(network.wan.dyndns)> updateDescription: Updates the access point’s current WAN IP address with the DynDNS service. Syntax:Examp

Seite 332

AP-7131 Access Point Product Reference Guide8-64AP7131>admin(network.wan.dyndns)> showDescription: Shows the current Dynamic DNS configuration.

Seite 333

8-658.3.3 Network Wireless CommandsAP7131>admin(network.wireless)Description: Displays the access point wireless submenu. The items available under

Seite 335 - CLI Reference

AP-7131 Access Point Product Reference Guide1-24Intercepting and decoding a direct-sequence transmission requires a predefined algorithm to associate

Seite 336 - 8.1 Connecting to the CLI

AP-7131 Access Point Product Reference Guide8-668.3.3.1 Network WLAN CommandsAP7131>admin(network.wireless.wlan)>Description: Displays the acces

Seite 337 - 8.2 Admin and Common Commands

8-67AP7131>admin(network.wireless.wlan)> showDescription: Displays the access point’s current WLAN configuration. Syntax:Example:admin(network.w

Seite 338 - AP7131>admin>help

AP-7131 Access Point Product Reference Guide8-68AP7131>admin(network.wireless.wlan)> createDescription: Defines the parameters of a new WLAN. Sy

Seite 339 - AP7131>admin>passwd

8-69answer Broadcast ESSID : disableQoS Policy : Defaultadmin(network.wireless.wlan.create)>show security----------------------------------------

Seite 340 - AP7131>admin>summary

AP-7131 Access Point Product Reference Guide8-70AP7131>admin(network.wireless.wlan)> editDescription: Edits the properties of an existing WLAN p

Seite 341 - AP7131>admin>

8-71AP7131>admin(network.wireless.wlan)> deleteDescription: Deletes an existing WLAN.Syntax:For information on deleting a WLAN using the applet

Seite 342 - AP7131>admin> /

AP-7131 Access Point Product Reference Guide8-72AP7131>admin(network.wireless.wlan.hotspot)>Description: Displays the Hotspot submenu. The items

Seite 343 - AP7131>admin>save

8-73AP7131>admin(network.wireless.wlan.hotspot)> showDescription: Displays the current access point Rogue AP detection configuration.Syntax:Exam

Seite 344 - AP7131>admin>quit

AP-7131 Access Point Product Reference Guide8-74AP7131>admin(network.wireless.wlan.hotspot)> redirectionDescription: Goes to the hotspot redirec

Seite 345 - 8.3 Network Commands

8-75AP7131>admin(network.wireless.wlan.hotspot)> radiusDescription: Goes to the hotspot Radius menu.Syntax:For information on configuring the Ho

Seite 346 - 8.3.1 Network LAN Commands

Introduction1-25• Ratio of good-transmitted packets to attempted-transmitted packets that fall below a threshold.An MU selects the best available acce

Seite 347 - Example:

AP-7131 Access Point Product Reference Guide8-76AP7131>admin(network.wireless.wlan.hotspot.radius)> setDescription: Sets the Radius hotspot conf

Seite 348

8-77AP7131>admin(network.wireless.wlan.hotspot.radius)> showDescription: Shows Radius hotspot server details.Syntax:Example:admin(network.wirele

Seite 349 - Related Commands:

AP-7131 Access Point Product Reference Guide8-78AP7131>admin(network.wireless.wlan.hotspot)> white-listDescription: Goes to the hotspot white-li

Seite 350

8-798.3.3.2 Network Security CommandsAP7131>admin(network.wireless.security)>Description: Displays the access point wireless security submenu. T

Seite 351

AP-7131 Access Point Product Reference Guide8-80AP7131>admin(network.wireless.security)>showDescription: Displays the access point’s current sec

Seite 352

8-81AP7131>admin(network.wireless.security)>setDescription: Enables/disables the WPA countermeasure.Syntax:Example:admin(network.wireless.securi

Seite 353

AP-7131 Access Point Product Reference Guide8-82AP7131>admin(network.wireless.security)>createDescription: Defines the parameter of access point

Seite 354

8-83secret <sidx> <secret> Sets the EAP shared secret <secret> (1-63 characters) for server <sidx> (1-primary or 2-secondary).

Seite 355

AP-7131 Access Point Product Reference Guide8-84mu-retry <count> Sets the EAP maximum number of MU retries to <count> (1-10).svr-timeout &

Seite 356

8-85For information on configuring the encryption and authentication options available to the access point using the applet (GUI), see Configuring Sec

Seite 357

AP-7131 Access Point Product Reference Guide1-26The access point requires one of the following connection methods to perform a custom installation and

Seite 358

AP-7131 Access Point Product Reference Guide8-86AP7131>admin(network.wireless.security.edit)> Description: Edits the properties of a specific se

Seite 359

8-87AP7131>admin(network.wireless.security)> deleteDescription: Deletes a specific security policy. Syntax: For information on configuring the e

Seite 360

AP-7131 Access Point Product Reference Guide8-888.3.3.3 Network ACL CommandsAP7131>admin(network.wireless.acl)>Description: Displays the access

Seite 361

8-89AP7131>admin(network.wireless.acl)> showDescription: Displays the access point’s current ACL configuration. Syntax:Example:admin(network.wir

Seite 362

AP-7131 Access Point Product Reference Guide8-90AP7131>admin(network.wireless.acl)> createDescription: Creates an MU ACL policy. Syntax: Example

Seite 363

8-91AP7131>admin(network.wireless.acl.edit)>Description: Edits the properties of an existing MU ACL policy.Syntax: For information on configurin

Seite 364

AP-7131 Access Point Product Reference Guide8-92AP7131>admin(network.wireless.acl)> deleteDescription: Removes an MU ACL policy. Syntax: For inf

Seite 365

8-938.3.3.4 Network Radio Configuration Commands AP7131>admin(network.wireless.radio)>Description: Displays the access point Radio submenu. The

Seite 366

AP-7131 Access Point Product Reference Guide8-94AP7131>admin(network.wireless.radio)> showDescription: Displays the access point’s current radio

Seite 367

8-95AP7131>admin(network.wireless.radio)> setDescription: Enables an access point Radio and defines the RF band of operation.Syntax: Example: ad

Seite 368

Introduction1-271.2.8 AP-7131 MAC Address AssignmentFor an AP-7131 model access point, MAC address assignments are as follows:• WAN (GE2) - The access

Seite 369

AP-7131 Access Point Product Reference Guide8-96AP7131>admin(network.wireless.radio.802-11n[2.4 GHz])>Description: Displays a specific 802.11n 2

Seite 370

8-97AP7131>admin(network.wireless.radio.802-11n[2.4 GHz])>show Description: Displays specific 802.11n (2.4 GHz) radio settings.Syntax: Example:

Seite 371

AP-7131 Access Point Product Reference Guide8-98admin(network.wireless.radio.802-11n[2.4 GHz])>show ratesBasic Rates 1 2 5.5 11Supported Rates 1 2

Seite 372

8-99admin(network.wireless.radio.802-11n[2.4 GHz])>show qosRadio QOS Parameter Set 11n-default-----------------------------------------------------

Seite 373 - 8.3.2 Network WAN Commands

AP-7131 Access Point Product Reference Guide8-100AP7131>admin(network.wireless.radio.802-11n[2.4 GHz])> setDescription: Defines specific 802.11n

Seite 374

8-101AP7131>admin(network.wireless.radio.802-11n[2.4 GHz].advanced)>Description: Displays the advanced submenu for the 802.11n (2.4 GHz) radio.

Seite 375

AP-7131 Access Point Product Reference Guide8-102AP7131>admin(network.wireless.radio.802-11n[2.4 GHz].advanced)> showDescription: Displays the B

Seite 376

8-103AP7131>admin(network.wireless.radio.802-11n[2.4 GHz].advanced)> setDescription: Defines advanced parameters for the target 802.11n (2.4 GHz

Seite 377

AP-7131 Access Point Product Reference Guide8-104AP7131>admin(network.wireless.radio.802-11n[2.4 GHz].mesh)>Description: Displays the mesh confi

Seite 378

8-105AP7131>admin(network.wireless.radio.802-11n[2.4 GHz].mesh)> showDescription: Displays mesh settings and status for the 802.11n (2.4 GHz) ra

Seite 379

AP-7131 Access Point Product Reference Guide1-28

Seite 380

AP-7131 Access Point Product Reference Guide8-106AP7131>admin(network.wireless.radio.802-11n[2.4 GHz].mesh)> setDescription: Defines mesh parame

Seite 381

8-107AP7131>admin(network.wireless.radio.802-11n[2.4 GHz].mesh)> addDescription: Adds a 802.11n (2.4 GHz) radio mesh connection.Syntax: Example:

Seite 382

AP-7131 Access Point Product Reference Guide8-108AP7131>admin(network.wireless.radio.802-11n[2.4 GHz].mesh)> deleteDescription: Deletes a 802.11

Seite 383

8-109AP7131>admin(network.wireless.radio.802-11n[5.0 GHz])>Description: Displays a specific 802.11n (5.0 GHz) radio 2 submenu. The items availab

Seite 384

AP-7131 Access Point Product Reference Guide8-110AP7131>admin(network.wireless.radio.802-11n[5.0 GHz])> showDescription: Displays specific 802.1

Seite 385

8-111admin(network.wireless.radio.802-11n[5.0 GHz])>show ratesBasic Rates 6 12 24Supported Rates 6 9 12 18 24 36 48 54Short Guard Interval disable-

Seite 386

AP-7131 Access Point Product Reference Guide8-112admin(network.wireless.radio.802-11n[5.0 GHz])>show qosRadio QOS Parameter Set 11n-default--------

Seite 387

8-113AP7131>admin(network.wireless.radio.802-11n[5.0 GHz])> setDescription: Defines specific 802.11n (5.0 GHz) radio parameters.Syntax: Example:

Seite 388

AP-7131 Access Point Product Reference Guide8-114AP7131>admin(network.wireless.radio.802-11n[5.0 GHz].advanced)>Description: Displays the advanc

Seite 389

8-115AP7131>admin(network.wireless.radio.802-11n[5.0 GHz].advanced)> showDescription: Displays the BSSID to WLAN mapping for the 802.11n (5.0 GH

Seite 390

Hardware InstallationAn AP-7131 access point installation includes mounting the access point, connecting the access point to the network, connecting a

Seite 391

AP-7131 Access Point Product Reference Guide8-116AP7131>admin(network.wireless.radio.802-11n[5.0 GHz].advanced)> setDescription: Defines advance

Seite 392

8-117AP7131>admin(network.wireless.radio.802-11n[5.0 GHz].mesh)>Description: Displays the mesh configuration submenu for the 802.11n (5.0 GHz) r

Seite 393

AP-7131 Access Point Product Reference Guide8-118AP7131>admin(network.wireless.radio.802-11n[5.0 GHz].mesh)> showDescription: Displays mesh sett

Seite 394

8-119AP7131>admin(network.wireless.radio.802-11n[5.0 GHz].mesh)> setDescription: Defines mesh parameters for the 802.11n (5.0 GHz) radio.Syntax:

Seite 395

AP-7131 Access Point Product Reference Guide8-120AP7131>admin(network.wireless.radio.802-11n[5.0 GHz].mesh)> addDescription: Adds a 802.11n (5.0

Seite 396

8-121AP7131>admin(network.wireless.radio.802-11n[5.0 GHz].mesh)> deleteDescription: Deletes a 802.11n (5.0 GHz) radio mesh connection by specifi

Seite 397

AP-7131 Access Point Product Reference Guide8-1228.3.3.5 Network Quality of Service (QoS) CommandsAP7131>admin(network.wireless.qos)>Description

Seite 398

8-123AP7131>admin(network.wireless.qos)> showDescription: Displays the access point’s current QoS policy by summary or individual policy. Syntax

Seite 399

AP-7131 Access Point Product Reference Guide8-124AP7131>admin(network.wireless.qos.create)>Description: Defines an access point QoS policy. Synt

Seite 400 - 8.3.3.1 Network WLAN Commands

8-125AP7131>admin(network.wireless.qos.edit)>Descripton:Edits the properties of an existing QoS policy.Syntax: For information on configuring th

Seite 401

AP-7131 Access Point Product Reference Guide2-22.1 PrecautionsBefore installing an AP-7131 model access point verify the following:• Do not install in

Seite 402

AP-7131 Access Point Product Reference Guide8-126AP7131>admin(network.wireless.qos)> deleteDescription: Removes a QoS policy. Syntax: For inform

Seite 403

8-1278.3.3.6 Network Bandwith Management CommandsAP7131>admin(network.wireless.bandwidth)>Description: Displays the access point Bandwidth Manag

Seite 404

AP-7131 Access Point Product Reference Guide8-128AP7131>admin(network.wireless.bandwidth)> showDescription: Displays the access point’s current

Seite 405

8-129AP7131>admin(network.wireless.bandwidth)> setDescription: Defines the access point Bandwidth Management configuration. Syntax: For informat

Seite 406

AP-7131 Access Point Product Reference Guide8-1308.3.3.7 Network Rogue-AP CommandsAP7131>admin(network.wireless.rogue-ap)>Description: Displays

Seite 407

8-131AP7131>admin(network.wireless.rogue-ap)> showDescription: Displays the current access point Rogue AP detection configuration.Syntax:Example

Seite 408

AP-7131 Access Point Product Reference Guide8-132AP7131>admin(network.wireless.rogue-ap)> setDescription: Defines the access point ACL rogue AP

Seite 409

8-133AP7131>admin(network.wireless.rogue-ap.mu-scan)>Description: Displays the Rogue-AP mu-scan submenu.Syntax: add Add all or just one scan res

Seite 410

AP-7131 Access Point Product Reference Guide8-134AP7131>admin(network.wireless.rogue-ap.mu-scan)> startDescription: Initiates an MU scan from a

Seite 411

8-135AP7131>admin(network.wireless.rogue-ap.mu-scan)> showDescription: Displays the results of an MU scan. Syntax: For information on configurin

Seite 412

Hardware Installation2-32.4 Access Point PlacementFor optimal performance, install the access point away from transformers, heavy-duty motors, fluores

Seite 413

AP-7131 Access Point Product Reference Guide8-136AP7131>admin(network.wireless.rogue-ap.allowed-list)>Description: Displays the Rogue-AP allowed

Seite 414

8-137AP7131>admin(network.wireless.rogue-ap.allowed-list)> showDescription: Displays the Rogue AP allowed List. Syntax: Example: admin(network.w

Seite 415

AP-7131 Access Point Product Reference Guide8-138AP7131>admin(network.wireless.rogue-ap.allowed-list)> addDescription: Adds an AP MAC address an

Seite 416

8-139AP7131>admin(network.wireless.rogue-ap.allowed-list)> deleteDescription: Deletes an AP MAC address and ESSID to existing allowed list.Synta

Seite 417

AP-7131 Access Point Product Reference Guide8-1408.3.3.8 WIPS CommandsAP7131>admin(network.wireless.wips)>Description: Displays the WIPS submenu

Seite 418

8-141AP7131>admin(network.wireless.wips> showDescription: Shows the WLAN Intrusion Prevention configuration.Syntax: Example:admin(network.wirele

Seite 419

AP-7131 Access Point Product Reference Guide8-142AP7131>admin(network.wireless.wips setDescription: Sets the WLAN Intrusion Prevention configuratio

Seite 420

8-1438.3.3.9 Network MU Locationing CommandsAP7131>admin(network.wireless.mu-locationing)>Description: Displays the MU Locationing submenu. The

Seite 421

AP-7131 Access Point Product Reference Guide8-144AP7131>admin(network.wireless.mu-locationing> showDescription: Displays the MU probe table conf

Seite 422 - 8.3.3.3 Network ACL Commands

8-145AP7131>admin(network.wireless.mu-locationing> setDescription: Defines the MU probe table configuration used for locating MUs. Syntax: Examp

Seite 423

AP-7131 Access Point Product Reference Guide2-4• Install the access point at an ideal height of 10 feet from the ground.• Orient the access point ante

Seite 424

AP-7131 Access Point Product Reference Guide8-1468.3.4 Network Firewall CommandsAP7131>admin(network.firewall)>Description: Displays the access

Seite 425

8-147AP7131>admin(network.firewall)> showDescription: Displays the access point firewall parameters. Syntax: Example:admin(network.firewall)>

Seite 426

AP-7131 Access Point Product Reference Guide8-148AP7131>admin(network.firewall)> setDescription: Defines the access point firewall parameters. S

Seite 427

8-149AP7131>admin(network.firewall)> accessDescription: Enables or disables firewall permissions through LAN to WAN ports.Syntax: Example:admin

Seite 428

AP-7131 Access Point Product Reference Guide8-150AP7131>admin(network.firewall)> advancedDescription: Displays whether an access point firewall

Seite 429

8-1518.3.5 Network Router CommandsAP7131>admin(network.router)>Description: Displays the router submenu. The items available under this command

Seite 430

AP-7131 Access Point Product Reference Guide8-152AP7131>admin(network.router)> showDescription: Shows the access point route table. Syntax: Exam

Seite 431

8-153AP7131>admin(network.router)> setDescription: Shows the access point route table. Syntax: For information on configuring the Router options

Seite 432

AP-7131 Access Point Product Reference Guide8-154AP7131>admin(network.router)> addDescription: Adds user-defined routes. Syntax: Example: admin(

Seite 433

8-155AP7131>admin(network.router)> deleteDescription: Deletes user-defined routes. Syntax: Example: admin(network.router)>list---------------

Seite 434

Hardware Installation2-5R1 defines the AP-7131’s radio 1 antenna connectors and R2 defines the AP-7131’s radio 2 antenna connectors.The AP-7131 2.4 GH

Seite 435

AP-7131 Access Point Product Reference Guide8-156AP7131>admin(network.router)> listDescription: Lists user-defined routes. Syntax: Example: admi

Seite 436

8-1578.4 System CommandsAP7131>admin(system)>Description: Displays the System submenu. The items available under this command are shown below. r

Seite 437

AP-7131 Access Point Product Reference Guide8-158AP7131>admin(system)>restart Description: Restarts the access point access point. Syntax: Examp

Seite 438

8-159AP7131>admin(system)>showDescription: Displays high-level system information helpful to differentiate this access point. Syntax: Example: a

Seite 439

AP-7131 Access Point Product Reference Guide8-160AP7131>admin(system)>setDescription: Sets access point system parameters. Syntax: admin(system)

Seite 440

8-161AP7131>admin(system)>lastpwDescription: Displays last expired debug password.Example:admin(system)>lastpwAP-7131 MAC Address is 00:15:70

Seite 441

AP-7131 Access Point Product Reference Guide8-162AP7131>admin(system)>arpDescription: Dispalys the access point’s arp table.Example:admin(system

Seite 442

8-1638.4.1 Power Setup CommandsAP7131>admin(system)>power-setupDescription:Displays the Power Setup submenu.For information on configuring power

Seite 443

AP-7131 Access Point Product Reference Guide8-164AP7131>admin(system.power-setup)>showDescription: Displays the access point’s current power con

Seite 444

8-165AP7131>admin(system.power-setup)>setDescription: Sets access point’s power consumption configuration. Syntax: admin(system.power-setup)>

Seite 445

ContentsChapter 1. IntroductionFeature Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 446

AP-7131 Access Point Product Reference Guide2-6The AP-7131 5 GHz antenna suite includes the following models:For detailed specifications on the 2.4 GH

Seite 447

AP-7131 Access Point Product Reference Guide8-1668.4.2 Adaptive AP Setup CommandsAP7131>admin(system)>aap-setupDescription: Displays the Adaptiv

Seite 448

8-167AP7131>admin(system.aap-setup)>showDescription: Displays the access point’s Adaptive AP configuration. Syntax: Example:admin(system.aap-set

Seite 449

AP-7131 Access Point Product Reference Guide8-168AP7131>admin(system.aap-setup)>setDescription: Sets access point’s Adaptive AP configuration. S

Seite 450

8-169AP7131>admin(system.aap-setup)>deleteDescription: Deletes static switch address assignments.Syntax: Example:admin(system.aap-setup)>dele

Seite 451

AP-7131 Access Point Product Reference Guide8-1708.4.3 System Access CommandsAP7131>admin(system)>accessDescription: Displays the access point a

Seite 452

8-171AP7131>admin(system.access)>setDescription: Defines the permissions to access the access point applet, CLI, SNMP as well as defining their

Seite 453

AP-7131 Access Point Product Reference Guide8-172AP7131>admin(system.access)>showDescription: Displays the current access point access permissio

Seite 454

8-1738.4.4 System Certificate Management CommandsAP7131>admin(system)>cmgrDescription: Displays the Certificate Manager submenu. The items avail

Seite 455

AP-7131 Access Point Product Reference Guide8-174AP7131>admin(system.cmgr)> genreqDescription: Generates a certificate request.Syntax: Note: The

Seite 456

8-175AP7131>admin(system.cmgr)> delselfDescription: )Deletes a self certificate. Syntax: Example: admin(system.cmgr)>delself MyCert2 For info

Seite 457

Hardware Installation2-72.6 AP-7131 Power Injector SystemAn AP-7131 access point can receive power via an Ethernet cable connected to the access point

Seite 458

AP-7131 Access Point Product Reference Guide8-176AP7131>admin(system.cmgr)> loadselfDescription: Loads a self certificate signed by the Certific

Seite 459 - Descripton:

8-177AP7131>admin(system.cmgr)> listselfDescription: Lists the loaded self certificates.Syntax: For information on configuring self certificate

Seite 460

AP-7131 Access Point Product Reference Guide8-178AP7131>admin(system.cmgr)> loadcaDescription: Loads a trusted certificate from the Certificate

Seite 461

8-179AP7131>admin(system.cmgr)> delcaDescription: Deletes a trusted certificate. Syntax: For information on configuring certificate settings usi

Seite 462

AP-7131 Access Point Product Reference Guide8-180AP7131>admin(system.cmgr)> listcaDescription: Lists the loaded trusted certificate. Syntax: For

Seite 463

8-181AP7131>admin(system.cmgr)> showreqDescription: Displays a certificate request in PEM format. Syntax: For information on configuring certifi

Seite 464

AP-7131 Access Point Product Reference Guide8-182AP7131>admin(system.cmgr)> delprivkeyDescription: Deletes a private key. Syntax: For informatio

Seite 465

8-183AP7131>admin(system.cmgr)> listprivkeyDescription: Lists the names of private keys. Syntax: For information on configuring certificate sett

Seite 466

AP-7131 Access Point Product Reference Guide8-184AP7131>admin(system.cmgr)> expcert Description: Exports the certificate file to a user defined

Seite 467

8-185AP7131>admin(system.cmgr)> impcertDescription: Imports the target certificate file.Syntax: To import certificate information from an AP-713

Seite 468

AP-7131 Access Point Product Reference Guide2-82.6.1 Installing the Power Injector Refer to the following sections for information on planning, instal

Seite 469

AP-7131 Access Point Product Reference Guide8-1868.4.5 System SNMP CommandsAP7131>admin(system)> snmp Description: Displays the SNMP submenu. Th

Seite 470

8-1878.4.5.1 System SNMP Access CommandsAP7131>admin(system.snmp.access)Description: Displays the SNMP Access menu. The items available under this

Seite 471

AP-7131 Access Point Product Reference Guide8-188AP7131>admin(system.snmp.access)> showDescription: Shows the SNMP v3 engine ID. Syntax: Example

Seite 472

8-189AP7131>admin(system.snmp.access)> addDescription: Adds SNMP access entries for specific v1v2 and v3 user definitions. Syntax: For informati

Seite 473

AP-7131 Access Point Product Reference Guide8-190AP7131>admin(system.snmp.access)> deleteDescription: Deletes SNMP access entries for specific v

Seite 474 - 8.3.3.8 WIPS Commands

8-191AP7131>admin(system.snmp.access)> listDescription: Lists SNMP access entries. Syntax: Example:admin(system.snmp.access)>list acl -------

Seite 475

AP-7131 Access Point Product Reference Guide8-1928.4.5.2 System SNMP Traps CommandsAP7131>admin(system.snmp.traps) Description: Displays the SNMP t

Seite 476

8-193AP7131>admin(system.snmp.traps)> showDescription: Shows SNMP trap parameters. Syntax: Example: admin(system.snmp.traps)>show trapSNMP MU

Seite 477

AP-7131 Access Point Product Reference Guide8-194AP7131>admin(system.snmp.traps)> setDescription: Sets SNMP trap parameters.Syntax: For informat

Seite 478

8-195AP7131>admin(system.snmp.traps)> addDescription:Adds SNMP trap entries. Syntax: Example: admin(system.snmp.traps)>add v1v2 203.223.24.2

Seite 479

Hardware Installation2-9Ensure the cable length from the Ethernet source (host) to the Power Injector and access point does not exceed 100 meters (333

Seite 480

AP-7131 Access Point Product Reference Guide8-196AP7131>admin(system.snmp.traps)> deleteDescription: Deletes SNMP trap entries. Syntax: Example:

Seite 481

8-197AP7131>admin(system.snmp.traps)> listDescription: Lists SNMP trap entries. Syntax: Example: admin(system.snmp.traps)>add v1v2 203.223.24

Seite 482

AP-7131 Access Point Product Reference Guide8-1988.4.6 System User Database CommandsAP7131>admin(system)> userdb Description: Goes to the user d

Seite 483

8-1998.4.5.1 Adding and Removing Users from the User DatabseAP7131>admin(system.userdb)> userDescription: Adds and remvoves users from the user

Seite 484

AP-7131 Access Point Product Reference Guide8-200AP7131>admin(system.userdb.user)> addDescription: Adds a new user to the user database. Syntax:

Seite 485 - 8.3.5 Network Router Commands

8-201AP7131>admin(system.userdb.user)> deleteDescription: Removes a new user to the user database. Syntax: Example: admin(system.userdb.user>

Seite 486

AP-7131 Access Point Product Reference Guide8-202AP7131>admin(system.userdb.user)>clearallDescription: Removes all existing user IDs from the sy

Seite 487

8-203AP7131>admin(system.userdb.user)>setDescription: Sets a password for a user..Syntax: Example: admin(system.userdb.user>set george passwo

Seite 488

AP-7131 Access Point Product Reference Guide8-2048.4.5.2 Adding and Removing Groups from the User DatabseAP7131>admin(system.userdb)> groupDescr

Seite 489

8-205AP7131>admin(system.userdb.group> createDescription: Creates a group name. Once defined, users can be added to the group.Syntax: Example: a

Seite 490

AP-7131 Access Point Product Reference Guide2-10

Seite 491 - 8.4 System Commands

AP-7131 Access Point Product Reference Guide8-206AP7131>admin(system.userdb.group> deleteDescription: Deletes an existing group.Syntax: Example:

Seite 492

8-207AP7131>admin(system.userdb.group> clearallDescription: Removes all existing group names from the system.Syntax: Example: admin(system.userd

Seite 493

AP-7131 Access Point Product Reference Guide8-208AP7131>admin(system.userdb.group> addDescription: Adds a user to an existing group.Syntax: Exam

Seite 494

8-209AP7131>admin(system.userdb.group> removeDescription: Removes a user from an existing group.Syntax: Example: admin(system.userdb.group>re

Seite 495

AP-7131 Access Point Product Reference Guide8-210AP7131>admin(system.userdb.group> showDescription: Displays existing groups.Syntax: Example: ad

Seite 496

8-2118.4.7 System Radius CommandsAP7131>admin(system)> radius Description: Goes to the Radius system submenu.Syntax: For information on configur

Seite 497 - 8.4.1 Power Setup Commands

AP-7131 Access Point Product Reference Guide8-212AP7131>admin(system.radius)> set/showDescription: Sets or displays the Radius user database.Syn

Seite 498

8-2138.4.6.1 AP7131>admin(system.radius)> eapDescription: Goes to the EAP submenu.Syntax: For information on configuring EAP Radius using the ap

Seite 499

AP-7131 Access Point Product Reference Guide8-214AP7131>admin(system.radius.eap)> peapDescription: Goes to the Peap submenu.Syntax: For informat

Seite 500

8-215AP7131>admin(system.radius.eap.peap> set/showDescription: Defines and displays Peap parametersSyntax: Example: admin(system.radius.eap.peap

Seite 501

Hardware Installation2-111. Xerox copy the template (on the previous page) to a blank piece of paper. Do not reduce or enlarge the scale of the templa

Seite 502

AP-7131 Access Point Product Reference Guide8-216AP7131>admin(system.radius.eap)> ttlsDescription: Goes to the TTLS submenu.Syntax: For informat

Seite 503

8-217AP7131>admin(system.radius.eap.ttls> set/showDescription: Defines and displays TTLS parametersSyntax: Example: admin(system.radius.eap.ttls

Seite 504 - 8.4.3 System Access Commands

AP-7131 Access Point Product Reference Guide8-2188.4.6.2 AP7131>admin(system.radius)> policyDescription: Goes to the access policy submenu.Synta

Seite 505

8-219AP7131>admin(system.radius.policy> set Description: Defines the group’s WLAN access policy.Syntax: Example: admin(system.radius.policy)>

Seite 506

AP-7131 Access Point Product Reference Guide8-220AP7131>admin(system.radius.policy> access-time Description: setGoes to the time-based login sub

Seite 507

8-221AP7131>admin(system.radius.policy> show Description: Displays a group’s access policy.Syntax: Example: admin(system.radius.policy)>showL

Seite 508

AP-7131 Access Point Product Reference Guide8-2228.4.6.3 AP7131>admin(system.radius)> ldapDescription: Goes to the LDAP submenu.Syntax: For info

Seite 509 - Description: )

8-223AP7131>admin(system.radius.ldap)> setDescription: Defines the LDAP parameters.Syntax: Example: admin(system.radius.ldap)>set ipadr 157.2

Seite 510

AP-7131 Access Point Product Reference Guide8-224AP7131>admin(system.radius.ldap)> show allDescription: Displays existing LDAP parameters.Syntax

Seite 511

8-2258.4.6.4 AP7131>admin(system.radius)> proxyDescription: Goes to the Radius proxy server submenu.Syntax: For information on configuring Radiu

Seite 512

AP-7131 Access Point Product Reference Guide2-1210. Cable the AP-7131 using either the Power Injector solution or an approved line cord and power supp

Seite 513

AP-7131 Access Point Product Reference Guide8-226AP7131>admin(system.radius.proxy)> addDescription: Adds a proxy.Syntax: Example: admin(system.r

Seite 514

8-227AP7131>admin(system.radius.proxy)> deleteDescription: Adds a proxy.Syntax: Example: admin(system.radius.proxy)>delete lancelotadmin(syst

Seite 515

AP-7131 Access Point Product Reference Guide8-228AP7131>admin(system.radius.proxy)> clearallDescription: Removes all proxy server records from t

Seite 516

8-229AP7131>admin(system.radius.proxy)> setDescription: Sets Radius proxy server parameters.Syntax: Example: admin(system.radius.proxy)>set d

Seite 517

AP-7131 Access Point Product Reference Guide8-2308.4.6.5 AP7131>admin(system.radius)> clientDescription: Goes to the Radius client submenu.Synta

Seite 518

8-231AP7131>admin(system.radius.client> addDescription: Adds a Radius client to those available to the Radius server.Syntax: Example: admin(syst

Seite 519

AP-7131 Access Point Product Reference Guide8-232AP7131>admin(system.radius.client> deleteDescription: Removes a specified Radius client from th

Seite 520 - 8.4.5 System SNMP Commands

8-233AP7131>admin(system.radius.client> showDescription: Displays a list of configured Radius clients.Syntax: Example: admin(system.radius.clien

Seite 521

AP-7131 Access Point Product Reference Guide8-2348.4.8 System Network Time Protocol (NTP) CommandsAP7131>admin(system)> ntp Description: Display

Seite 522

8-235AP7131>admin(system.ntp)> showDescription: Displays the NTP server configuration. Syntax: Example: admin(system.ntp)>showcurrent time (U

Seite 523

Hardware Installation2-131. Motorola recommends you loop a safety wire—with a diameter of at least 1.01 mm (.04 in.), but no more than 0.158 mm (.0625

Seite 524

AP-7131 Access Point Product Reference Guide8-236 AP7131>admin(system.ntp)> date-zoneDescription: Show date, time and time zone.Syntax: Example:

Seite 525

8-237AP7131>admin(system.ntp)> zone-listDescription: Displays an extensive list of time zones for countries around the world.Syntax: Example: ad

Seite 526

AP-7131 Access Point Product Reference Guide8-238AP7131>admin(system.ntp)> setDescription: Sets NTP parameters for access point clock synchroniz

Seite 527

8-2398.4.9 System Log CommandsAP7131>admin(system)> logs Description: Displays the access point log submenu. Logging options include:Syntax: sho

Seite 528

AP-7131 Access Point Product Reference Guide8-240AP7131>admin(system.logs)> showDescription: Displays the current access point logging settings.

Seite 529

8-241AP7131>admin(system.logs)> setDescription: Sets log options and parameters. Syntax: admin(system.logs)>set mode enableadmin(system.logs)

Seite 530

AP-7131 Access Point Product Reference Guide8-242AP7131>admin(system.logs)> viewDescription: Displays the access point system log file. Syntax:

Seite 531

8-243AP7131>admin(system.logs)> deleteDescription: Deletes the log files. Syntax: Example: admin(system.logs)>deleteFor information on config

Seite 532

AP-7131 Access Point Product Reference Guide8-244AP7131>admin(system.logs)> sendDescription: Sends log and core file to an FTP Server. Syntax: E

Seite 533

8-2458.4.10 System Configuration-Update CommandsAP7131>admin(system.config)>Description: Displays the access point configuration update submenu

Seite 534

AP-7131 Access Point Product Reference Guide2-148. Rotate the AP-7131 chassis 45 degrees clockwise.9. Push the back of the AP-7131 chassis on to the b

Seite 535

AP-7131 Access Point Product Reference Guide8-246AP7131>admin(system.config)> defaultDescription: Restores the full access point factory default

Seite 536

8-247AP7131>admin(system.config)> partialDescription: Restores a partial factory default configuration. The access point’s LAN, WAN and SNMP set

Seite 537

AP-7131 Access Point Product Reference Guide8-248AP7131>admin(system.config)> showDescription: Displays import/export parameters for the access

Seite 538

8-249AP7131>admin(system.config)> setDescription: Sets the import/export parameters. Syntax: Example: admin(system.config)>set server 192.168

Seite 539

AP-7131 Access Point Product Reference Guide8-250AP7131>admin(system.config)> exportDescription: Exports the configuration from the system. Synt

Seite 540

8-251AP7131>admin(system.config)> importDescription: Imports the access point configuration to the access point. Errors could display as a resul

Seite 541

AP-7131 Access Point Product Reference Guide8-2528.4.11 Firmware Update CommandsAP7131>admin(system)>fw-updateDescription: Displays the firmware

Seite 542

8-253AP7131>admin(system.fw-update)>showDescription: Displays the current access point firmware update settings.Syntax: Example:admin(system.fw-

Seite 543

AP-7131 Access Point Product Reference Guide8-254AP7131>admin(system.fw-update)>setDescription: Defines access point firmware update settings an

Seite 544

8-255AP7131>admin(system.fw-update)>updateDescription: Executes the access point firmware update over the WAN or LAN port using either ftp or tf

Seite 545 - 8.4.7 System Radius Commands

Hardware Installation2-15the unit. An above the ceiling AP-7131 installation enables installations compliant with drop ceilings, suspended ceilings an

Seite 546

AP-7131 Access Point Product Reference Guide8-2568.5 Statistics CommandsAP7131>admin(stats)Description: Displays the access point statistics submen

Seite 547

8-257AP7131>admin(stats)> showDescription: Displays access point system information. Syntax: For information on displaying WAN port statistics u

Seite 548

AP-7131 Access Point Product Reference Guide8-258AP7131>admin(stats)> send-cfg-apDescription: Copies the access point’s configuration to another

Seite 549

8-259AP7131>admin(stats)> send-cfg-allDescription: Copies the access point’s configuration to all of the access points within the known AP table

Seite 550

AP-7131 Access Point Product Reference Guide8-260AP7131>admin(stats)> clearDescription: Clears the specified statistics counters to zero to begi

Seite 551

8-261AP7131>admin(stats)> flash-all-ledsDescription: Starts and stops the illumination of a specified access point’s LEDs.Syntax: Example:admin(

Seite 552

AP-7131 Access Point Product Reference Guide8-262AP7131>admin(stats)> echoDescription: Defines the echo test values used to conduct a ping test

Seite 553

8-263AP7131>admin.stats.echo)> showDescription: Shows Mobile Unit Statistics Summary.Syntax: Example:admin(stats.echo)>show------------------

Seite 554 - Description: set

AP-7131 Access Point Product Reference Guide8-264AP7131>admin.stats.echo)> listDescription: Lists echo test parameters and results.Syntax: Examp

Seite 555

8-265AP7131>admin.stats.echo)>setDescription: Defines the parameters of the echo test.Syntax: For information on MU Echo and Ping tests using th

Seite 556

AP-7131 Access Point Product Reference GuideviWi-Fi Protected Access (WPA) Using TKIP Encryption . . . . . . . . . . . . . . .1-9WPA2-CCMP (802.11i)

Seite 557

AP-7131 Access Point Product Reference Guide2-167. Remove the light pipe’s rubber stopper before installing the light pipe.8. Connect the light pipe t

Seite 558

AP-7131 Access Point Product Reference Guide8-266AP7131>admin.stats.echo)> startDescription: Initiates the echo test.Syntax: Example:admin(stats

Seite 559

8-267AP7131>admin(stats)> pingDescription: Defines the ping test values used to conduct a ping test to an AP with the same ESSID.Syntax: For inf

Seite 560

AP-7131 Access Point Product Reference Guide8-268AP7131>admin.stats.ping)> showDescription: Shows Known AP Summary Details.Syntax: Example:admin

Seite 561

8-269AP7131>admin.stats.ping)> listDescription: Lists ping test parameters and results.Syntax: Example:admin(stats.ping)>listStation Address

Seite 562

AP-7131 Access Point Product Reference Guide8-270AP7131>admin.stats.ping)> setDescription: Defines the parameters of the ping test.Syntax: Examp

Seite 563

8-271AP7131>admin.stats.echo)> startDescription: Initiates the ping test.Syntax: Example:admin(stats.ping)>startadmin(stats.ping)>listStat

Seite 564

AP-7131 Access Point Product Reference Guide8-272

Seite 565

Configuring Mesh Networking9.1 Mesh Networking OverviewAn AP-7131 can be configured in two modes to support the new mesh networking functionality. The

Seite 566

AP-7131 Access Point Product Reference Guide9-2access points configured as both a base and a client bridge function as repeaters to transmit data with

Seite 567

Configuring Mesh Networking9-3If an access point is configured as a base bridge (but not as a client bridge) it operates normally at boot time. The ba

Seite 568

Hardware Installation2-17b. Connect a RJ-45 CAT5e (or CAT6) Ethernet cable between the Power Injector Data & Power Out connector and the AP-7131 G

Seite 569

AP-7131 Access Point Product Reference Guide9-4The access point in client bridge mode attempts to establish up to 3 simultaneous wireless connections.

Seite 570

Configuring Mesh Networking9-59.1.3 Defining the Mesh TopologyWhen a user wants to control how the spanning tree determines client bridge connections,

Seite 571

AP-7131 Access Point Product Reference Guide9-69.1.5 Normal OperationOnce the mesh network is defined, all normal access point operations are still al

Seite 572

Configuring Mesh Networking9-7As the Spanning Tree Protocol (STP) mentions, each mesh network maintains hello, forward delay and max age timers. The b

Seite 573 - 8.4.9 System Log Commands

AP-7131 Access Point Product Reference Guide9-86. Click OK to return to either the LAN1 or LAN2 screen where updates to the Mesh STP Configuration can

Seite 574

Configuring Mesh Networking9-99.2.2 Configuring a WLAN for Mesh Networking SupportEach access point comprising a particular mesh network is required t

Seite 575

AP-7131 Access Point Product Reference Guide9-103. Assign an ESSID and Name to the WLAN that each access point will share when using this WLAN within

Seite 576

Configuring Mesh Networking9-114. Use the Available On checkboxes to specify the access point radio(s) used with the target WLAN within the mesh netwo

Seite 577

AP-7131 Access Point Product Reference Guide9-12If none of the existing policies are suitable, select the Create button to the right of the Security P

Seite 578

Configuring Mesh Networking9-1310. Select the Use Secure Beacon checkbox to not transmit the ESSID amongst the access points and devices within the me

Seite 579

AP-7131 Access Point Product Reference Guide2-18 The LEDs on the top housing of the AP-7131 are clearly visible in wall and below ceiling installatio

Seite 580

AP-7131 Access Point Product Reference Guide9-14To configure the access point radio for mesh networking support:1. Select Network Configuration ->

Seite 581

Configuring Mesh Networking9-15Configuration screen, the Radio Status and MUs connected values update. If this is an existing radio within a mesh netw

Seite 582

AP-7131 Access Point Product Reference Guide9-16If the Client Bridge checkbox has been selected, use the Mesh Network Name drop-down menu to select th

Seite 583

Configuring Mesh Networking9-17the user from selecting the order base bridges are added to the mesh network when one of the three associated base brid

Seite 584

AP-7131 Access Point Product Reference Guide9-1812. Highlight a MAC address from the Preferred Base Bridge List and click the Up button to assign that

Seite 585

Configuring Mesh Networking9-1917. Click Apply to save any changes to the Radio Configuration screen. Navigating away from the screen without clicking

Seite 586

AP-7131 Access Point Product Reference Guide9-209.3 Mesh Network Deployment - Quick SetupThis section provides instructions on how to quickly setup an

Seite 587

Configuring Mesh Networking9-21 2. Assign a Mesh STP Priority of 40000 to LAN1 Interface.NOTE Enable the LAN1 Interface of AP#1 as a DHCP Server if yo

Seite 588

AP-7131 Access Point Product Reference Guide9-223. Define a mesh supported WLAN.4. Enable base bridge functionality on the 802.11a/n radio (Radio 2).

Seite 589

Configuring Mesh Networking9-235. Define a channel of operation for the 802.11a/n radio.

Seite 590 - 8.5 Statistics Commands

Hardware Installation2-192.8.1 Dual Radio (2.4/5 GHz) AP-7131A dual radio (2.4/5 Ghz) model AP-7131 has the following unique LED behavior: 2.8.2 Sing

Seite 591

AP-7131 Access Point Product Reference Guide9-24 6. If needed, create another WLAN mapped to the 802.11b/g/n radio if 802.11b/g/n support is required

Seite 592

Configuring Mesh Networking9-259.3.1.2 Configuring AP#2AP#2 can be configured the same as AP#1 with the following exceptions: • Assign an IP Address t

Seite 593

AP-7131 Access Point Product Reference Guide9-269.3.1.3 Configuring AP#3To define the configuration for AP#3 (a client bridge connecting to both AP#1

Seite 594

Configuring Mesh Networking9-273. Create a mesh supported WLAN with the Enable Client Bridge Backhaul option selected. 4. Select the Client Bridge ch

Seite 595

AP-7131 Access Point Product Reference Guide9-285. If needed, create another WLAN mapped to the 802.11b/g/n radio if 802.11b/g/n support is required f

Seite 596

Configuring Mesh Networking9-299.3.2 Scenario 2 - Two Hop Mesh Network with a Base Bridge Repeater and a Client BridgeBy default, the mesh algorithm r

Seite 597

AP-7131 Access Point Product Reference Guide9-309.3.2.2 Configuring AP#2AP#2 requires the following modifications from AP#2 in the previous scenario t

Seite 598

Configuring Mesh Networking9-312. Enable client and base bridge functionality on the 802.11a/n radio9.3.2.3 Configuring AP#3To define AP #3’s configur

Seite 599

AP-7131 Access Point Product Reference Guide9-322. Add the 802.11a/n Radio MAC Address. In scenario #2, the mesh WLAN is mapped to BSS1 on the 802.11a

Seite 600

Configuring Mesh Networking9-33 9.3.2.4 Verifying Mesh Network Functionality for Scenario #2You now have a three AP demo multi-hop mesh network ready

Seite 601

AP-7131 Access Point Product Reference Guide2-202.8.3 Single Radio 5 GHz AP-7131 LEDs The single 5 Ghz radio model AP-7131 has the following unique L

Seite 602

AP-7131 Access Point Product Reference Guide9-349.4 Mesh Networking Frequently Asked QuestionsThe following scenarios represent issues that could be e

Seite 603

Configuring Mesh Networking9-35Mesh Deployment Issue 4 - Do I need to map a WLAN to a radio when configuring mesh backhaul on a Client Bridge?When cre

Seite 604

AP-7131 Access Point Product Reference Guide9-36Mesh Deployment Issue 8 - Can I mesh between an AP-7131, AP-5131 and an AP-5181?Can I mesh between the

Seite 605

Configuring Mesh Networking9-37ResolutionYes, mesh nodes also support Automatic Firmware/Configuration updates using DHCP Options. Make sure you creat

Seite 606

AP-7131 Access Point Product Reference Guide9-38

Seite 607 - Configuring Mesh Networking

Adaptive AP10.1 Adaptive AP OverviewAn adaptive AP (AAP) is an AP-7131 access point that can adopt like an AP300 (L3). The management of an AAP is con

Seite 608

AP-7131 Access Point Product Reference Guide10-2The benefits of an AAP deployment include:• Centralized Configuration Management & Compliance - Wi

Seite 609

Adaptive AP10-310.1.2 Adaptive AP ManagementAn AAP can be adopted, configured and managed like a thin access port from the wireless switch. Once an a

Seite 610

AP-7131 Access Point Product Reference Guide10-410.1.4.1 Auto Discovery using DHCPExtended Global Options 189, 190, 191, 192 can be used or Embedded O

Seite 611

Adaptive AP10-510.1.4.2 Manual Adoption ConfigurationA manual switch adoption of an AAP can be conducted using:• Static FQDN - A switch fully qualifie

Seite 612 - 9.1.5 Normal Operation

Hardware Installation2-212.9 Setting Up MUs2.9.1 Legacy MUsFor a discussion of how to initially test the access point to ensure it can interoperate wi

Seite 613

AP-7131 Access Point Product Reference Guide10-610.1.7 Configuration UpdatesAn AAP receives its configuration from the switch initially as part of its

Seite 614

Adaptive AP10-710.1.10 Remote Site Survivability (RSS)RSS can be used to turn off RF activity on an AAP if it loses adoption (connection) to the switc

Seite 615

AP-7131 Access Point Product Reference Guide10-810.2 Supported Adaptive AP TopologiesFor this version of the access point firmware, the following AAP

Seite 616

Adaptive AP10-910.2.2 Extended WLANs OnlyAn extended WLAN configuration forces all MU traffic through the switch. No wireless traffic is locally bridg

Seite 617

AP-7131 Access Point Product Reference Guide10-1010.2.5 Extended WLAN with Mesh NetworkingMesh networking is an extension of the existing wired networ

Seite 618

Adaptive AP10-11• Configure the switch’s IP address on the AAP• Provide the switch IP address using DHCP option 189 on a DHCP server. The IP address i

Seite 619

AP-7131 Access Point Product Reference Guide10-1210.4 Establishing Basic Adaptive AP ConnectivityThis section defines the activities required to confi

Seite 620

Adaptive AP10-132. Select the Auto Discovery Enable checkbox. Enabling auto discovery will allow the AAP to be detected by a switch once its connectiv

Seite 621

AP-7131 Access Point Product Reference Guide10-147. Click Apply to save the changes to the AAP setup. 10.4.1.2 Adopting an Adaptive AP Using a Configu

Seite 622

Adaptive AP10-1510.4.2 Switch ConfigurationBoth a WS5100 (running firmware version 3.1 or later) or a RFS6000/ RFS7000 (running firmware version 1.1 o

Seite 623

AP-7131 Access Point Product Reference Guide2-22Select Disable when the 802.11n rate settings and performance values defined on the AP-7131 cannot be

Seite 624

AP-7131 Access Point Product Reference Guide10-165. Select the target WLAN you would like to use for AAP support from those displayed and click the Ed

Seite 625

Adaptive AP10-17Once an AAP is adopted by the switch, it displays within the switch Access Port Radios screen (under the Network parent menu item) as

Seite 626 - 9.3.1.1 Configuring AP#1:

AP-7131 Access Point Product Reference Guide10-1810.4.3 Adaptive AP Deployment ConsiderationsBefore deploying your switch/AAP configuration, refer to

Seite 627

Adaptive AP10-1910.4.4 Sample Switch Configuration File for IPSec and Independent WLANThe following constitutes a sample RFS7000 switch configuration

Seite 628

AP-7131 Access Point Product Reference Guide10-20snmp-server manager v2 snmp-server manager v3 snmp-server user snmptrap v3 encrypted auth md5 0x7be2c

Seite 629

Adaptive AP10-21wlan 4 enable wlan 4 ssid qs5-open wlan 4 vlan 230 wlan 5 enable wlan 5 ssid Mesh wlan 5 vlan 111 wlan 5 encryption-type ccmp wlan 5 d

Seite 630

AP-7131 Access Point Product Reference Guide10-22radio 4 bss 2 6 radio 4 channel-power indoor 48 4 radio 4 rss enable radio 4 client-bridge bridge-sel

Seite 631 - 9.3.1.2 Configuring AP#2

Adaptive AP10-23!interface ge3 switchport mode trunk switchport trunk native vlan 1 switchport trunk allowed vlan none switchport trunk allowed vlan a

Seite 632 - 9.3.1.3 Configuring AP#3

AP-7131 Access Point Product Reference Guide10-24line con 0 line vty 0 24 ! end

Seite 633

Technical SpecificationsThis appendix provides technical specifications in the following areas: • AP-7131 Physical Characteristics• Electrical Charact

Seite 634

Getting StartedThe access point should be installed in an area tested for radio coverage using one of the site survey tools available to the field ser

Seite 635 - Repeater and a Client Bridge

AP-7131 Access Point Product Reference GuideA-2A.1 AP-7131 Physical CharacteristicsThe AP-7131 has the following physical characteristics: Dimensions

Seite 636 - 9.3.2.2 Configuring AP#2

Technical SpecificationsA-3A.2 Electrical CharacteristicsThe AP-7131 access point has the following electrical characteristics:A.3 Radio Characteristi

Seite 637 - 9.3.2.3 Configuring AP#3

AP-7131 Access Point Product Reference GuideA-4A.4 Antenna SpecificationsA.4.1 2.4 GHz Antenna MatrixThe following table describes each 2.4 GHz antenn

Seite 638

Technical SpecificationsA-5A.4.1.2 AP-5131 Additional Antenna ComponentsThe following table lists the Motorola part number for various antenna accesso

Seite 639

AP-7131 Access Point Product Reference GuideA-6A.5 Country CodesThe following list of countries and their country codes is useful when using the acces

Seite 640

Technical SpecificationsA-7Cypress CY Serbia RSCzech Rep. CZ Singapore SGDenmark DK Slovak Republic SKDominican Republic DO Slovenia SIEcuador EC Sout

Seite 641

AP-7131 Access Point Product Reference GuideA-8Japan JPJordan JOKazakhstan KZKuwait KWLatvia LVLebanon LBLiechtenstein LILithuania LTLuxembourg LUMace

Seite 642

Usage ScenariosThis appendix provides practical usage scenarios for many of the access point’s key features. This information should be referenced as

Seite 643

AP-7131 Access Point Product Reference GuideB-2WAN port depending on which server responds first to the access point’s request for an automatic update

Seite 644

Usage ScenariosB-31. Set the Windows DHCP Server and access point on the same Ethernet segment.2. Configure the Windows based DHCP Server as follows:a

Seite 645 - Adaptive AP

AP-7131 Access Point Product Reference Guide3-2• For instructions on mounting a AP-7131 to a wall, see Wall Mounted Installations on page 2-9.• For in

Seite 646 - 10.1.1 Where to Go From Here

AP-7131 Access Point Product Reference GuideB-4The setup example described in this section includes:• 1 AP-7131 model access point• 1 Microsoft Window

Seite 647 - 10.1.4 Switch Discovery

Usage ScenariosB-5By default, auto update is enabled on the access point (since the LAN Port is a DHCP Client, out-of-the-box auto update support is o

Seite 648

AP-7131 Access Point Product Reference GuideB-6If the DHCP Server is configured for options 186 and 66 (to assign TFTP Server IP addresses) the access

Seite 649

Usage ScenariosB-7B.1.2.1 BootP OptionsThis section contains instructions for the automatic update of the access point firmware and configuration file

Seite 650 - 10.1.7 Configuration Updates

AP-7131 Access Point Product Reference GuideB-8Using options sa, bf and 136: 3. Copy the firmware and configuration files to the appropriate directory

Seite 651 - 10.1.11 Adaptive Mesh Support

Usage ScenariosB-9B.1.2.2 BootP PrioritiesThe following flowchart displays the priorities used by the access point when the BootP server is configured

Seite 652

AP-7131 Access Point Product Reference GuideB-10B.2 Configuring an IPSEC Tunnel and VPN FAQsThe access point has the capability to create a tunnel bet

Seite 653 - 10.2.3 Independent WLANs Only

Usage ScenariosB-115. Enter the WAN port IP address of AP #1 for the Local WAN IP.6. Within the Remote Subnet and Remote Subnet Mask fields, enter the

Seite 654 - Adaptive AP Pre-requisites

AP-7131 Access Point Product Reference GuideB-1211. For the ESP Type, select ESP with Authentication and use AES 128-bit as the ESP encryption algorit

Seite 655

Usage ScenariosB-1315. Select AES 128-bit as the IKE Encryption Algorithm.16. Select Group 2 as the Diffie -Hellman Group. Click OK. This will take yo

Seite 656

Getting Started3-33.3 Initially Connecting to the Access Point 3.3.1 Connecting to the Access Point using the WAN PortTo initially connect to the acce

Seite 657

AP-7131 Access Point Product Reference GuideB-14

Seite 658 - Option Data Type Value

Usage ScenariosB-15B.2.3 Frequently Asked VPN QuestionsThe following are common questions that arise when configuring a VPN tunnel.• Question 1: Does

Seite 659 - 10.4.2 Switch Configuration

AP-7131 Access Point Product Reference GuideB-16• Question 6: Can an IPSec tunnel over a PPPoE connection be established - such as a PPPoE enabled DSL

Seite 660

Usage ScenariosB-17 • Question 9: I am using a direct cable connection between my two VPN gateways for testing and cannot get a tunnel established, ye

Seite 661

AP-7131 Access Point Product Reference GuideB-18• Verify you can ping each of the remote Gateway IP addresses from clients on either side. Failed ping

Seite 662

Usage ScenariosB-19These three rules should be configured above all other rules (default or user defined). When Advanced LAN Access is used, certain i

Seite 663

AP-7131 Access Point Product Reference GuideB-20

Seite 664

Customer SupportComprehensive on-line support is available at the Support Central site at http://www.symbol.com/support/. Support Central provides our

Seite 665

AP-7131 Access Point Product Reference GuideC-2North American ContactsSupport (for warranty and service information): telephone: 1-800-653-5350 fax: (

Seite 666

Customer SupportC-3Web Support SitesProduct Downloadshttp://support.symbol.com/support/product/softwaredownloads.doManualshttp://support.symbol.com/su

Seite 667

viiDirect-Sequence Spread Spectrum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-23MU Association Process . . . . . . . . . . .

Seite 668

AP-7131 Access Point Product Reference Guide3-43. Configure the following settings:• Baud Rate - 19200• Data Bits - 8• Stop Bits - 1• No Parity• No Fl

Seite 669 - Technical Specifications

AP-7131 Access Point Product Reference GuideC-4

Seite 670

Aaccess options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25access pointCAM . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 671 - A.3 Radio Characteristics

AP-7131 Access Point Product Reference GuideIN-6CLI, ACL commands . . . . . . . . . . . . . . . . . . . . . . . . . . .8-88CLI, bandwith management .

Seite 672 - A.4 Antenna Specifications

IN-7LLAN port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4LAN to WAN access . . . . . . . . . . . . . . . . . . . . .

Seite 673

AP-7131 Access Point Product Reference GuideIN-8service information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiisingle sku . . . .

Seite 675

MOTOROLA INC.1303 E. ALGONQUIN ROADSCHAUMBURG, IL 60196http://www.motorola.com72E-124686-01 Revision AMay 2009

Seite 676

Getting Started3-52. If the default login is successful, the Change Admin Password window displays. Change the password.Enter the current password and

Seite 677 - Usage Scenarios

AP-7131 Access Point Product Reference Guide3-6The export function will always export the encrypted Admin User password. The import function will impo

Seite 678

Getting Started3-7The System Name is useful if multiple devices are being administered.3. Select the Country for the access point’s country of operati

Seite 679 - Usage Scenarios

AP-7131 Access Point Product Reference Guide3-84. Optionally enter the IP address of the server used to provide system time to the access point within

Seite 680

Getting Started3-9e. Define a Default Gateway address for the access point’s WAN connection. The ISP or a network administrator provides this address.

Seite 681 - B.1.1.3 DHCP Priorities

AP-7131 Access Point Product Reference Guide3-10c. If using the static or DHCP Server option, enter the network-assigned IP Address of the access poin

Seite 682

Getting Started3-11a. Enter the Extended Services Set Identification (ESSID) and name associated with the WLAN. For additional information on creating

Seite 683 - B.1.2.1 BootP Options

AP-7131 Access Point Product Reference Guide3-12The New Security Policy screen displays with the Manually Pre-shared key/No authentication and No Encr

Seite 684

Getting Started3-134. Configure the WEP 128 Settings field as required to define the Pass Key used to generate the WEP keys.Pass Key Specify a 4 to 3

Seite 685 - B.1.2.2 BootP Priorities

AP-7131 Access Point Product Reference GuideviiiConnecting to the Access Point using the LAN Port . . . . . . . . . . . . . . . . . . . . .3-3Basic De

Seite 686

AP-7131 Access Point Product Reference Guide3-145. Click the Apply button to save the security policy and return to the access point Quick Setup scree

Seite 687

Getting Started3-153.4.3 Where to Go from Here?Once basic connectivity has been verified, the access point can be fully configured to meet the needs o

Seite 688

AP-7131 Access Point Product Reference Guide3-16

Seite 689

System ConfigurationThe access point contains a built-in browser interface for system configuration and remote management using a standard Web browser

Seite 690

AP-7131 Access Point Product Reference Guide4-2System configuration topics include: • Configuring System Settings• Configuring Power Settings• Adaptiv

Seite 691

System Configuration4-32. Configure the access point System Settings field to assign a system name and location, set the country of operation and view

Seite 692

AP-7131 Access Point Product Reference Guide4-43. Refer to the Factory Defaults field to restore either a full or partial default configuration. Admin

Seite 693

System Configuration4-54. Use the Restart access point field to restart the AP (if necessary).5. Click Apply to save any changes to the System Setting

Seite 694

AP-7131 Access Point Product Reference Guide4-66. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the settings displa

Seite 695

System Configuration4-7If 3af is selected, the AP is configured assuming 12.95 watts are available using a 3af power budget, even though there may act

Seite 696

ixEnabling Wireless LANs (WLANs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-28Creating/Editing Individual WLANs . .

Seite 697 - Customer Support

AP-7131 Access Point Product Reference Guide4-8Refer to the following to assess the AP-7131’s current power state. Once known, determine how available

Seite 698 - International Contacts

System Configuration4-9To configure the access point’s switch discovery method and connection medium:1. Select System Configuration -> Adaptive AP

Seite 699 - Additional Information

AP-7131 Access Point Product Reference Guide4-103. Refer to the 12 available Switch IP Addresses to review the addresses the access point uses to adop

Seite 700

System Configuration4-11However, if the access point receives one or more IP addresses from the DHCP server, it will not solicit an IP address from a

Seite 701

AP-7131 Access Point Product Reference Guide4-122. Use the access point Access field checkboxes to enable/disable the following on the access point’s

Seite 702

System Configuration4-133. Refer to the Applet Timeout field to set an HTTPS timeout interval.4. Configure the Secure Shell field to set timeout value

Seite 703

AP-7131 Access Point Product Reference Guide4-147. Update the Administrator Access field to change the administrative password used to access the conf

Seite 704

System Configuration4-158. Refer to the Login Message field to optionally define a message displayed to the customer as they login into the access poi

Seite 705

AP-7131 Access Point Product Reference Guide4-169. Click Apply to save any changes to the access point Access screen. Navigating away from the screen

Seite 706

System Configuration4-17select the IKE settings to use either RSA or DES certificates. For additional information on configuring VPN tunnels, see Conf

Kommentare zu diesen Handbüchern

Keine Kommentare