Connecting the DCT5100 to a High-Definition TV and VCR
1. Using the Video Only diagram, connect your coaxial cable to the Motorola DCT5100 and the DCT5100 Y Pb Pr HD video connection directly to
your HDTV.
Connector Cables to be used: • 1 set of two-pronged RCA type audio cables (red & white) • 2 sets of “Y” audio splitter cables
• 2 S-video cables – OR – 2 sets of single-pronged RCA type video cables (yellow)
Note: The video cables you use will depend on the inputs/outputs on your VCR and HDTV. S-video is considered the higher standard definition video output
and should be your first choice.
2. Connect the single connector end of a Y audio splitter cable to the AUDIO OUT R (red) on the DCT5100. Insert the other ends into the AUDIO IN R
on your VCR and AUDIO IN R on your HDTV.
3. Use the second splitter cable to connect the AUDIO OUT L (white) on the DCT5100 to the AUDIO IN L connections on both the VCR and the HDTV.
4. Use the two-pronged RCA cable to connect the AUDIO OUT L & R on your VCR to the AUDIO IN L & R on your HDTV.
5. Using an S-video cable, connect the S-VIDEO output on the DCT5100 to the S-VIDEO IN on your VCR. Then use the second S-video cable to connect
the S-VIDEO output on the VCR to the S-VIDEO IN on your HDTV.
– OR –
6. Using your single-pronged RCA type video connector cable, connect the VIDEO OUT (yellow) connector on the DCT5100 to the VIDEO IN connector
on your VCR. Next, use the second single-pronged RCA type video connector cable to connect the VIDEO OUT connector on your VCR to the VIDEO
IN connector on your HDTV.
This diagram should be
used if you intend to use
a standard stereo VCR in
your configuration. This
configuration will allow
you to watch both HD
and Standard Definition
video on your HDTV as
well as record and play
Standard Definition video
via your VCR.
Do not plug the DCT5100 power cord into a wall
outlet until you have completed all connections
between the DCT and other components.
Kommentare zu diesen Handbüchern