Motorola D1010 Bedienungsanleitung PDF herunterladen (Seite 7)

Getting started 7

Insert the 2 x AAA NiMH batteries supplied into the handset. Then

slide the compartment cover into place.

Place the handset on the charger to charge for at least 24 hours.

When the handset is fully charged the icon will indicate that it is

fully charged.

When the handset is fully charged after 24 hours, plug the telephone

line cord from the large base into the telephone wall socket.

IMPORTANT

Warning! Use only rechargeable batteries. If non-rechargeable batteries

are used

WARNING BATT

will be displayed and charging will be stopped.

Please replace with rechargable batteries.

BATTERY LOW WARNING

If the icon flashes in the display, you will need to recharge the handset

before you can use it again.

During charging, the icon will scroll in the display.

BATTERY PERFORMANCE

In ideal conditions, fully charged batteries should give about 10 hours talk

time or 100 hours standby time on a single charge.

Note that new batteries do not reach full capacity until they have been in

normal use for several days.

To keep your batteries in the best condition, leave the handset off the

base for a few hours at a time.

Running the batteries right down at least once a week will help them last

as long as possible.

The charge capacity of rechargeable batteries will reduce with time as

they wear out, giving the handset less talk/standby time. Eventually they

will need to be replaced.

After charging your handset for the first time, subsequent charging time

is about 6–8 hours a day. Batteries and handset may become warm

during charging. This is normal.

Date and time

Providing you have subscribed to your network’s Caller Display service,

the date and time is set automatically for all handsets every time a call is

received.

The date and time is recorded with each answer machine message you

receive.

If you do not have a Caller Display service you can set the date and time

manually.

Set date and time manually

Press m and scroll d to

CLOCK/ALARM

. Press m. Display shows

DATE & TIME

, then press m.

Enter the date using the format

DD/MM

e.g.

04/ 08

for 4th August.

Press m and enter the time using the 24 hour format

HH:MM

e.g. 14:45 for 2.45pm.

Press m to confirm or > to return to standby.

Your D1011 is now ready for use.

1 2 3 4 5 6 7 8 9 10 11 12 ... 34 35

Kommentare zu diesen Handbüchern

Keine Kommentare

Motorola D1010 Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kabelloses Mobiltelefon Motorola D1010