
7 - 20 MC3000 Integrator Guide
Figure 7-24
Passkey Dialog Box
Tap
Next. The IP Mode dialog box displays.
IP Mode
Use the IP Mode dialog box to configure network address parameters: IP address, subnet, gateway, DNS and
WINS.
Figure 7-25
IP Config Tab (DHCP)
Select either
DHCP or Static from the drop-down list and then tap Next. If Static IP is selected, the IP Address Entry
dialog box displays. If
DHCP is selected, the Transmit Power dialog box displays.
IP Address Entry
Use the IP Address Entry dialog box to enter the IP address and subnet information.
Table 7-13
IP Mode Options
Encryption Description
DHCP Select
Dynamic Host Configuration Protocol (DHCP)
from the
IP Mode
drop-down list to obtain a
leased IP address and network configuration information from a remote server. DHCP is the
default setting for the mobile computer profile. When DHCP is selected, the IP address fields
are read-only.
Static Select
Static
to manually assign the IP, subnet mask, default gateway, DNS and WINS
addresses used by the mobile computer profile.
Kommentare zu diesen Handbüchern