Motorola 7545MBWM Betriebsanweisung PDF herunterladen (Seite 204)

4 - 90 Omnii (Windows Embedded Hand-Held 6.5) User Guide

Double Click Parameters

Click Time (msec)

This parameter controls the maximum gap time (in milliseconds) for a double-click

. If the time between the first

and second clicks of the scanner trigger is within this time, it is considered a double-click. The allowable range

is 0 to 1000. A value of zero disables this feature.

A double-click produces different result

s depending on whether or not a value is assigned in the “Click Data”

parameter. When a value is not assigned for the “Click Data”, double-clicking the scanner trigger overrides the

target dot delay set in the “Dot Time” parameter and initiates a normal scan sweep. If a value is assigned for

the “Click Data” parameter, double-clicking the scanner trigger inserts the “Click Data” value rather than initi-

ating a scan.

Click Data

For both integrated and external scanners, this parameter

determines which character is sent to the application

installed in your Omnii following a double-click. A dialog box appears, asking that you press the key you want

to insert. The ASCII/Unicode key value of the keypress is displayed.

Display Parameters

Scan Result

When this parameter is enabled, the type of barcode and the re

sult of the scan appear on the screen. Note that

this information is only displayed after a successful decode and is visible only while the scanner button is

pressed. When the button is released, this information is cleared from the screen.

Scan Indicator

When this parameter is enabled, the laser warning logo appears on the display whenever the scanner

is activated.

Scan Result Time (msec)

The value assigned to the “Scan Result Time (sec)” parameter determines how long the scan results of a

successfu

l scan are displayed on the screen. Time is measured in seconds, and a value of “0” (zero) disables

the parameter. When you choose this option, a dialog box appears where you can enter a value.

NOTE To remove the scan result from the screen before the “Result Time” has expired, point

the scanner away from the barcode and press the trigger.

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 349 350

Keine Kommentare

Motorola 7545MBWM Betriebsanweisung Seite 204