Motorola MICOM-2TS Spezifikationen PDF herunterladen (Seite 41)

New ALE Features

6. After the link is established, you will see a LINK message. Now you may

press the PTT and start talking.

7. To disconnect the link, press the ESC key.

➤ To transmit on a specific channel:

1. Initiate a call as explained above (page 25 or 26)

and select the desired station.

CALL

1009

MOTOROLA

SEND PAGE CHAN MONs

2. Press CHAN (F3) to select a specific channel.

The channel with the best LQA score is displayed.

The speaker is unmuted to enable you to check the

channel quality by listening to it.

CALL

CH 3 30%

MOTOROLA

SEND PAGE BEST MONs

Note

If the name of the called station has been edited and the new

station name is not in the directory, no LQA score is displayed.

3. Press BEST (F3) to select the channel with the best LQA score ...

Note

If the name of the called station has been edited and the new

station name is not in the directory, the channel displayed after

pressing BEST (F3) is the first scanned channel of the net.

… or

Press the UP/DOWN keys to scroll to the channel of your choice.

Note

You can use this option to transmit a call to a station operating in

the Channel mode. If the other station is in the Channel mode,

your radio switches to the Channel mode for the duration of the

call, and then returns to the ALE mode after the link to that station

is disconnected.

4. Press SEND (F1) or ENTER to initiate the call.

5. The radio now starts the link set up process. During this process, you will

see TO alternating with the number of the channel on which the set up

request is being sent (the channel may change, if the called station does not

answer on the first channel(s)).

_________________________________________________________________________________________________

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 75 76

Keine Kommentare

Motorola MICOM-2TS Spezifikationen Seite 41