Motorola XU2100 Bedienungsanleitung PDF herunterladen (Seite 10)

Getting Started

Installing the Nickel-Metal Hydride Battery

Your radio is powered by an NiMH

battery, which provides up to 15 hours*

of usage. Before you install the battery,

mark the date in the "INSTALL DATE"

section with a permanent marker. As in

vehicles, all rechargable batteries lose

capacity over time.

1. Push and hold down the ribbed

latch on the bottom of the radio

toward the contacts, then slide and

lift the battery door off.

2. With the Motorola logo side up, and

the charge contacts facing the

bottom of the radio, insert the top of

the battery into the radio.

3. Push the battery up and into the

battery compartment to fit tightly

into place.

4. Slide and snap the battery door into

place.

*Based upon 5% transmit/ 5% receive/

90% standby (standard duty cycle).

Ribbed

Latch

Getting Started

Charging the XSeries Radio

Charge the NiMH battery for 16 hours before using

it for the first time. It will only need up to eight hours

of charging thereafter.

1. Make sure the radio is off.

2. Lift the accessory cover and plug the 53874

charger (NNTN4077) into the lower jack.

3. Plug the charger into a power outlet. The light

on the charger glows during charging.

Note: For optimum battery life, do not charge the

battery for prolonged periods after it is fully

charged. Charging the battery over the

weekend is acceptable.

If the radio is on while charging, additional

time is required to charge the battery.

Use only the charger supplied with the

radio, or other XSeries power

accessories. See “Battery and Charging

Options” on page 22.

Light

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 34 35

Kommentare zu diesen Handbüchern

Keine Kommentare

Motorola XU2100 Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Radio Stationen Motorola XU2100