11RNG200N Quick Start Guide
Troubleshooting
Problem — If this occurs: Solution — Then do one of the following:
There is no audio
from the center and/or
surround speakers of a
home theater receiver
connected to the
set-top
• Not all Dolby Digital programs feature full 5.1 surround sound. In some cases, the programs may only contain
left and right stereo audio.
• Verify that the S/PDIF cable (coaxial or optical) is fi rmly connected to the set-top and the home theater
receiver.
• Verify that the home theater receiver is set to a surround sound audio mode (Dolby Digital, Dolby Pro Logic II,
Dolby Pro Logic).
• Verify that the receiver is properly confi gured to work with all connected speakers.
There is no video on the
TV screen
• Verify that the TV is powered on and set to the appropriate input source for the set-top.
• Verify that the set-top is powered on and tuned to an authorized cable channel.
• Verify that all video cables between the set-top and the TV are fi rmly connected.
• Verify that the coaxial cable feed is fi rmly connected to the set-top and the wall jack.
• If the set-top video output is connected to a home theater unit, verify that the home theater unit is powered
on and set to the appropriate input source.
• If the set-top video output is connected to a TV through an HDMI connection, power off the TV and then
power off the set-top. Wait one second and then power on the devices.
• Not all HDTVs can display every output format (1080i, 1080p, 720p, 480p, or 480i) available on the set-top. To
select a different format:
1. Ensure that your set-top is plugged into a power outlet and is turned off.
2. Ensure the TV is turned on and tuned to the appropriate channel for the set-top.
3. Press the MENU key on the front panel. Your settings are displayed on the set-top front panel display.
4. Use the ▲ and ▼ keys on the front panel to display the HDMI/YPbPr OUTPUT setting.
5. Press the ► key to cycle through the available output formats until a picture displays on the TV.
No graphics or
program guides appear
on the TV screen
If you use the IEEE-1394 connection, on-screen graphics, including closed captions and program guides, are
not displayed by the set-top. On-screen graphics and captions may still be overlaid by your TV, if enabled.
Alternatively, use HDMI or component video instead.
(2 Seiten)
(16 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern