Motorola DSR315 Betriebsanweisung PDF herunterladen (Seite 31)

Installation

DSR315 User Guide 19

Acquiring a Signal

Complete the following steps to help you acquire a signal:

• Using the number keys on the remote control, tune to the authorization channel

(refer to the information supplied with your system). You should see a banner

with the channel number at the top of the screen.

• Press the OPTIONS key on the remote control. The Options menu will appear.

• From the Options menu, select option 6 (Change System Settings), and the

System Settings menu will appear.

• Select option 3 (Change

Installation Settings),

and on the Installation

Settings menu select

option 1 (Tune in

Satellite Signal).

• Look at the value in the

box labelled Signal. If it

is less than 10, make

sure that all connections

between the satellite

dish LNBF and the

satellite receiver are

correct. If the signal

strength remains below 10, contact your service provider for assistance.

• Using the number keys on the remote control, enter the Provider ID supplied

by your service provider (refer to the information supplied with your system).

You can use the

key on the remote control to back up and make corrections.

• If the satellite dish is pointed at the correct satellite, the large field in the center

of the screen will turn green and display the message "Correct signal found". If

you do not see this message within 5 to 10 minutes, the satellite dish may be

pointed at the incorrect satellite. Contact your service provider for assistance.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 69 70

Keine Kommentare

Motorola DSR315 Betriebsanweisung Seite 31